• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.307-313
• /
• 2003

A technique for the design of cooling tower fans with sweep is presented. This technique is developed using the equations for the one dimensional inviscid flow through the fan blade, the empirical equations, and the experimental correlations. A parabolic function is used to generate a sweep of the fan. Design data for the fan and the balde can be obtained for a given flow rate and a pressure rise. Also, the present method is used to construct the three dimensional model for the designed fan. Design data and the model show general characteristics of the axial propeller fan.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.1-7
• /
• 2005

This paper deals with the design and aerodynamic analysis of a special-type impulse turbine, with an end plate for wave energy conversion. Numerical analysis was performed using a CFD code, FLUENT. The main idea of the proposed end plate was to minimize the adverse effect of tip clearance of turbine blade, and was borrowed from ducted propeller, with so-called penetrating end plate for special purpose marine vehicles. Results show that efficiency increases up to $5\%$, depending on the flow coefficient; a higher flow coefficient yields increased efficiency. Decrease of input coefficient CAwith an end plate is the main reason for higher efficiency. Performance of end plate at various design parameters, as well as flow conditions, was investigated; the advantages and disadvantages of the presentimpulse turbine were also discussed.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.134-137
• /
• 2005

Recently, in VLCC, shafting system is stiffer due to large engine power whereas hull structure is more flexible due to scantling optimization, which can be suffered from alignment damage by incompatibility between shafting and hull, In this study, shafting system without stern tube forward bush was adapted for less sensitive system against external factors. Also, shaft alignment analysis was considered with hull deflection at various ship loading conditions and stern tube after bush of long journal bearing was evaluated by static squeezing pressure and dynamic oil film pressure with sloping control. Whirling vibration was also reviewed to avoid resonance with propeller blade order. So, reliable shafting design for VLCC could be achieved through optimized alignment analysis for the system without stern tube forward bush.

• Journal of Ship and Ocean Technology
• /
• 제2권1호
• /
• pp.13-30
• /
• 1998

The design method for trans-cavitating propellers is considered as the combination of super-and sub-cavitating propellers. Especially the design method of the super-cavitating region of the propeller blade is elaborated. A design example is shown. Encouraging test results obtained in the Korea Research Institute of Ship and Ocean (KRISO) cavitation tunnel of a model designed by the present method are discussed.

• 대한조선학회지
• /
• 제18권3호
• /
• pp.11-27
• /
• 1981

This paper is prepared to solve the problem of two-dimensional sinusoidal motion of hydrofoil, which can be related not only to the prediction of unsteady forces acting on the marine propeller blade but to the study of aquatic animal's undulatory mode of propulsion. For convenience's shake, this manuscript can be devided into two parts. In the first part, the lift and moment coefficients have been calculated by the method of conformal transformation. In the other part, the thrust and the hydromechanical efficiency have been evaluated, using Lagally's technique having extended to the unsteady case, they also have been compared with the results, which had been obtained by Lighthill[6] and Wu[7] using Prandtl's acceleration potential.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.39-45
• /
• 1995

Three-dimensional flow measurements were conducted between the rotors of the CRP To understand mean flow phenomena of the CRP's, the results of the three-dimensional measurements were shown. Interaction noise of the CRP, which increases the overall ,level of sound pressure In the new propulsion system, is documented by using the double conditional sampling technique. The rear rotor will increase the axial flow between the rotors of a CRP depending upon the relative locations between the forward and the rear rotor blades. The decay and spreading of the forward wakes and the upstream propagation of the rear blade disturbances are shown along with the interaction of the flow disturbances by the two rotors of blades.

• 한국음향학회지
• /
• 제40권4호
• /
• pp.261-269
• /
• 2021

공동 유동과 이로 인한 소음에 관한 대부분의 기존 연구들은 효율성이라는 장점 때문에 비압축성 가정의 검증 없이 비압축성 Reynolds averaged Navier-Stokes 방정식에 기반한 수치 해석 방법을 사용하고 있다. 하지만 지금까지 비압축성 가정이 공동 유동과 소음의 예측에 미치는 영향에 대한 연구가 전무한 실정이다. 본 연구에서는 날개 끝 와류공동 유동과 소음에 대한 유체의 압축성 영향을 고찰하기 위하여 날개 끝 와류 공동을 대상으로 비압축성 기반의 해석과 압축성 기반의 해석을 모두 수행하고, Ffowcs Williams and Hawkings(FW-H) 음향상사법을 적용하여 공동 소음을 예측하고 비교하였다. 상류 방향의 유동 영향을 고려하기 위하여, 스큐각이 17°인 수중 추진기를 장착한 DARPA Suboff 잠수함 몸체를 고려하였다. 해석 영역은 실험결과와의 비교를 위하여 선박해양플랜트연구소에서 보유하고 있는 대형 캐비테이션 터널의 시험부와 동일하게 설정하였다. 날개 끝 와류 공동을 정확하게 예측하기 위하여 고정확도의 비정상 상태 지연박리와류모사 해석방법을 적응형 격자 기법과 연계하여 사용하였다. 압축성 유동 해석기법을 이용하여 예측한 음향 스펙트럼이 실험결과와 더 일치하는 결과를 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제31권4호
• /
• pp.387-394
• /
• 2020

A parametric study of a 2.5 kW class propeller type micro hydraulic turbine was performed. In order to analyze the internal flow characteristics in the hydraulic turbine, three dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model were used and the hexahedral grid system was used to construct computational domain. To secure the reliability of the numerical analysis, the grid dependency test was performed using the grid convergence index method based on the Richardson extrapolation, and the grid dependency was removed when about 1.7 million nodes were used. For the parametric study, the axial distance at shroud span (L) between the inlet guide vane and the runner, and the inlet and outlet blade angles (β₁, β₂) of the runner were selected as the geometric parameters. The inlet and outlet angles of the runner were defined in the 3 spans from the hub to tip, and a total of 7 geometric parameters were investigated. It was confirmed that the outlet angles of the runner had the most sensitive effect on the power and efficiency of the micro hydraulic turbine.

• 대한조선학회논문집
• /
• 제53권5호
• /
• pp.343-352
• /
• 2016

In this study, a pre-swirl duct for the 180,000 DWT bulk carrier has been designed from a propulsion standpoint using CFD. The stern duct - designed by NMRI - was selected as the initial duct. The objective function is to minimize the value of delivered power in model scale. Design variables of the duct include duct angle, diameter, chord length, and vertical and horizontal displacements from the center. Design variables of the stators are blade number, arrangement angle, chord length, and pitch angle. A parametric design was carried out with the objective function obtained using CFD. Reynolds averaged Navier-Stokes equations have been solved; and the Reynolds stress model applied for the turbulent closure. A double body model is used for the treatment of free-surface. MRF and sliding mesh models have been applied to simulate the actuating propeller. A self-propulsion point has been obtained from the results of towing and self-propelled computations, i.e., form factor obtained from towing computation and towing forces obtained from self-propelled computations of two propeller rotating speeds. The reduction rate of the delivered power of the improved stern duct is 2.9%, whereas that of the initial stern duct is 1.3%. The pre-swirl duct with one inner stator in upper starboard and three outer stators in portside has been designed. The delivered power due to the designed pre-swirl duct is reduced by 5.8%.

• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.55-63
• /
• 1995

본 논문은 경계적분법에 의해 날개끝판이 부착된 프로펠러(EPP)의 성능을 해석하는 방법을 기술하고 있다. 나선 프로펠러 날개와 날개끝판을 사각형 판요소로 치환하고, 균일 세기의 쏘오스와 법선 다이폴을 분포하여 해석한다. 포텐셜을 기저로 하는 정식화 과정을 통해 적분방정식을 구하고, 나선날개와 날개끝판에서 동시에 법선방향 비침투조건을 만족시킴으로써 섭동 속도 포텐셜을 구하였다. Kutta조건은 반복작업을 통해 나선날개와 날개끝판의 뒷날에서 압력점프가 없어지도록 함으로써 만족시켰다. 예제계산을 통하여 날개끝판이 나선날개의 날개끝 부근의 하중을 증가시킴을 보였고, 동시에 날개끝판의 뒷날에 걸쳐 후연 보오텍스를 분산시킴으로써 강력한 날개끝 보오텍스의 형성을 피할 수 있음을 확인하였다. EPP의 성능을 추정한 결과는 실험결과와 좋은 일치를 보인다. 에너지절약 추진장치로 채택될 수 있는 EPP의 설계 및 해석을 위하여 본 연구에서 확립된 방법이 적용가능하리라 판단된다.