• International Journal of Fluid Machinery and Systems
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2014

The propellant acquisition vane (PAV) is a key part of a vane type surface tension propellant management device (PMD), which can manage the propellant effectively. In the present paper, the fluid transportation behaviors for five PAVs with different sections were investigated by using microgravity drop tower test. Further, numerical simulation for the propellant flow in a PMD under microgravity condition was also carried out based on VOF model, and showed the similar flow pattern for PAVs to the experiment. It is noted that the section geometry of PAVs is one of the main factors affecting the fluid transportation behavior of PMD. PAVs with bottom length ratio of 5/6 and 1/2 have larger propellant transportation velocity. Based on the experiments, there were two stages during the process of propellant transportation under microgravity environment: liquid relocation and steady transportation stage. It is also recognized that there is a linear correlation between liquid transportation velocity and relative time's square root. Those results can not only provide a guideline for optimization of new vane type PMDs, but also are helpful for fluid control applications in space environment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.62-69
• /
• 1998

Mechanical properties of polyethyleneglycol(PEG)/cyclo-tetramethylene tetranitramine(HMX) propellant were studied by adding polycaprolactone(PCP) and silane derivatives as coupling agent. Mechanical properties of the propellant were enhanced by increasing the content of PCP which was partially replaced with PEG. PCP/HMX propellant showed 17% increase in maximum tensile strength and 59% increase in elongation compared to those of PEG/HMX propellant. However, as the content of PCP was increased, the hydrolytic stability of this propellant was found to be deteriorated due to the ester group of PCP by measuring hardness drop of cured propellant and swell ratio difference of PEG/PCP binder stored at $40^{\cire}C$ and 90% relative humidity. Hardness of the PEG/PCP/HMX propellant was decreased with increasing triethoxysilyl propionitrile(TESPN) and dinitrosalicylic acid (DNSA) content from accelerated aging at $60^{\cire}C$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.364-367
• /
• 2017

The basic design concept of the DACS(Divert and Attitude Control System) propellant is presented and the geometry optimization of the DACS propellant with limited outer diameter and maximum burning rate of the propellant is performed. Two-side burning surface conditions burned at the core and the one side of the propellant are applied to the propellant. And the optimized values for the radius of core, length of propellant, angle of end-side surface are obtained by the PSO algorithm. The direction for DACS propellant design is suggested by analyzing optimized design points for various burning rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.972-977
• /
• 2017

The propellant tile and crack which account for the greatest proportion of solid rockets are profoundly affected by viscosity and mechanical properties of solid propellant. In this paper solid propellant with nitrate ester polyester(NEPE) system has been researched for the viscosity, mechanical properties and burning properties with size and mixing ratio of RDX. the viscosity of propellant was changed significantly depending on the size of RDX and mixing ratio, and mechanical properties of NEPE system propellant were also varied. Considering both lower viscosity and stable mechanical properties, the optimum size and mixing ratio of RDX can be identified as the main factors to the NEPE system propellant.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.5
• /
• pp.84-90
• /
• 2020

The adhesion strength of two konds of solid propellants(primary propellant/secondary propellant) was studied by coating agent of adhesion composition composed of organic solvent, curing agent, and cure catalyst. The coating agent using FeAA, cure catalyst, resulted propellant breaking at more 0.14 wt% and interface breaking at less 0.10 wt%. The TPB cure catalyst of confirmed the result of the interface breaking immediately after curing of the secondary propellant. In addition, the coating agent using TPB was found to increase the adhesion strength between the primary propellant and the secondary propellant over time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.3
• /
• pp.321-328
• /
• 2022

The current development tend of the gun propellants that they should have low sensitivity and high energy. We studied a nitrocellulose based propellant composition that replaced sensitive NG with RDX and DEGDN which high energy and low sensitivity. The important factors in the design of the gun propellant were impetus and flame temperature. NC-based propellant containing RDX showed similar impetus but low flame temperature compared to KM30A1, a triple-based propellant. The developed propellant composition didn't show any abnormal combustion reaction and the characteristics of ballistic resistance were also confirmed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.225-228
• /
• 2007

Micro solid propellant thruster is the most feasible for development with current MEMS. Basic components of micro solid propellant thruster are diverging nozzle, micro igniter, combustion chamber, and solid propellant. Micro nozzles and micro chambers were fabricated using photosensitive glass by anisotropic wet etching technique. Micro Pt heaters on glass membrane which ignited solid propellant were developed. Components of thruster were integrated. Successful ignition was observed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.335-340
• /
• 2004

On a liquid propellant PPT, the discharge processes that discharge was initiated and plasma was accelerated was observed by using a ultra high speed camera. Liquid propellant PPT is a pulsed plasma thruster using liquid as propellant. Our past study showed the successful operation of liquid propellant PPT and the thruster showed high specific impulse. However, its acceleration mechanism has not been clarified. In this study we observed the plasma acceleration processes in order to deepen our understanding of the acceleration mechanism.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.504-507
• /
• 2017

The polybutadiene-based HTPB used as the propellant main binder influences the curing reaction rate of the binder and propellant depending on the synthetic batch. The properties of HTPB synthesized in different batches were analyzed and applied to propellants to evaluate the curing reaction rate and mechanical properties. Finally this reaction can also affect mechanical properties of propellant. And the results suggest that proper degree of curing reaction is necessary to obtain better mechanical properties of propellant.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.1048-1053
• /
• 2009

It proposes an simple and intuitive method that calculates the equilibrium pressures of a propellant tank by appling the mass conservation principle on the helium in the liquid propellant and in an ullage volume of the propellant tank. A propellant loading analysis program is developed and validated against the existing reference data. And it has applied to the present developing program, COMS Chemical Propulsion Subsystem and the results are compared, it may use to develop a technology of the next geostationary complex satellite's propulsion system.