• 전자공학회논문지A
• /
• 제30A권8호
• /
• pp.27-33
• /
• 1993

This paper presents a mobile measurement technique of the ghost-flutter caused in mobile television reception. The ghost-flutter is caused by timing variation of the television horizontal synchronizing pulse due to frequency selective fading in a multipath propagation environment. The ghost-flutter can be detected by measuring the dynamic timing variation of horizontal synchronizing pulse. Especially, in this paper, a technique for measuring horizontal synchronizing timing fluctuations which cause the ghost-flutter is developed, using a Rubidium oscillator as a time standard with high stability.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.81-87
• /
• 1994

This paper proposes a divider structure that combines a carry-propagation-free division algorithm using RSD number system and a self-timed ring structure. The self-timed ring structure enables the divider to compute at a speed comparable to that of combinational array dividers with less silicon area. By exploiting the carry-propagation-free division algorithm, we can achieve further reduction of silicon area and computation time. The algorithm and structure of the proposed divider have been successfully verified through VHDL modeling and simulation. Preliminary experimental results show the effectiveness of the algorithm and structure.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.39-47
• /
• 1994

In this paper, by modeling the Multilayer-Multiconductor Transmission Line(MMTL) with the characteristic parameters-effective dielectric constant, eigen modal voltages, characteristic impedances at each mode, pulse propagation characteristics of MMTL network are simulated. Transmission line modelling is performed in frequency domain, then time domain resposes are obtained by transforming the frequency domain response using fast Fourier transform.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.293-297
• /
• 1998

This paper presents a newly developed speed sensorless drive using RLS based on Neural Network Training Algorithm. The proposed algorithm has just the time-varying learning rate, while the wellknown back-propagation algorithm based on gradient descent has a constant learning rate. The number of iterations required by the new algorithm to converge is less than that of the back-propagation algorithm. The theoretical analysis and experimental results to verify the effectiveness of the proposed control strategy are described.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.694-695
• /
• 2013

An experimental study has been made with the use of time reversal concepts to recover the input waveform in a long range propagation of dispersive Lamb waves. Three techniques have been tested: Regular TR, 1 bit TR and Inverse filter (IF). The IF approach was found to completely recover the original input signal. Moreover, the IF technique significantly increases the contrast, i.e., the ratio of the recovered signal and the sideband signal.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.172-175
• /
• 2005

The numerical simulation is performed for the acoustic emission and the wave propagation due to fiber breakage in single fiber composite plates by the finite element transient analysis. The acoustic emission and the following wave motions from a fiber breakage under a static loading is simulated to investigate the applicability of the explicit finite element method and the equivalent volume force model as a simulation tool of wave propagation and a modeling technique of an acoustic emission. For such a simple case of the damage event under static loading, various parameters affecting the wave motion are investigated for reliable simulations of the impact damage event. The high velocity and the small wave length of the acoustic emission require a refined analysis with dense distribution of the finite element and a small time step. In order to fulfill the requirement for capturing the exact wave propagation and to cover the 3-D simulation, we utilize the parallel FE transient analysis code and the parallel computing technology.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1486-1496
• /
• 2000

The initial flame kernel development and flame propagation in a constant volume combustion chamber is analyzed by the heat release rate and the mass fraction burnt. The combustion pressure is measured with a piezoelectric type pressure sensor. In order to evaluate the effects of ignition system and ignition energy on the flame propagation, four different ignition systems are designed and tested, and the ignition energy is varied by the dwell time. Several different spark plugs are also tested and examined to analysis the effects of electrodes on flame kernel development. The results show that the when the dwell time is increased, and when the spark plug gap is extended, heat release rate and the mass burnt fraction are increased. The materials and shapes of electrodes affect the flame development, because they change the energy transfer efficiency from electrical energy to chemical energy. The diameter of electrodes influences not only the heat release rate but also the mass burnt fraction as well.

• 한국가스학회지
• /
• 제14권3호
• /
• pp.8-13
• /
• 2010

최근 석유에너지의 대체에너지로 수소에 대해 사회적인 관심이 높아짐에 따라, 수소의 연소특성에 관한 연구가 많이 진행되고 있다. 하지만, 수소화염의 온도는 고온이며, 전파속도가 빠르며, 수소화염은 가시광을 거의 방출하지 않기 때문에 화염의 특성을 파악하는 것이 쉽지 않다. 본 연구에서는 직경12.7, 25.4, 50.8 ${\mu}m$인 3종류의 극세선 열전대를 이용하여 화염의 도달시간 및 온도를 동시에 측정하였다. 이론혼합농도에서의 화염도달시간을 검출한 결과, 빠른 수소화염의 전파속도를 정밀히 측정할 수 있음이 확인되었다. 또한, 열전대의 시정수를 고려함으로써, 화염온도를 추측하는 것이 가능함을 확인했다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1097-1102
• /
• 2002

For detecting of Faulty Insulator, a new Lateral Information Propagation Networks (LIPN) has been proposed. Energized insulator is reduced the rate of insulation extremely, and taken the results dirty and injured. It is necessary to be actions that detect the faulty insulator and exchange the new one. And thus, we have designed the LIPN to be detected that insulators by the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. Information propagates among neighbor nodes laterally and inter-node interpolation is achieved. Through several simulation experiments,real time reconstruction of the nonlinear image information is processed.

• 전자공학회논문지
• /
• 제52권1호
• /
• pp.3-6
• /
• 2015

최근 들어 다양한 센서를 장착한 스마트 건물의 등장이 가시화 됨에 따라 센서로부터 데이터의 수집과 분석이 중요하게 되었다. 센서로부터 데이터를 획득하기 위해서는 일정구간의 유선화는 불가피하나 유선화 구간을 최소화하고 건물에 따라서는 센서간의 통신을 무선으로 함을 목표로 하고 있다. 이러한 케이블링에 따른 비용부담과 건물의 손상 등을 방지하기 위해서는 무선화가 가능한 구역의 선정 및 건물 구조에 따른 신호전달 특성을 객관적으로 파악하는 것이 매우 중요하다. 본 논문에서는 건물 내 신호전달 특성을 측정하기 위한 시스템의 설계를 다루고 시뮬레이션을 통해 시스템의 동작을 확인한다.