• KSBB Journal
• /
• v.10 no.4
• /
• pp.393-400
• /
• 1995

As a part of the .study on the multiple propagation and use of Dendropanax mcrbifera, distribution of this tree and component analysis of Golden Lacquer were investigated to reappear the Golden Lacquer, traditional paints. These results were summarized as follows. The natural growth habitat of Dendropanax morbifera was observed in 8 sites(Wando, Sanghwangbong, etc.), we could be found that Duryun nountain in Haenam for the first time. Dendropunax morbifera has grown from 100 to 450m above the sea level, appeared high frequency in the 200m. The soil pH of natural growth site was pH 4.9 to pH 5.8. Dendropanax morbifera grew in the area containing considerable moisture in that its contents was 16.5% to 27.4%. In community observation, dominance and community index of Bogildo and Chejudo was 3.3 in the forest tree layer and Wando was showed in the sub-forest tree layer mainly. In the growth conditions, Bogildo appeared the highest growth state that diameter of height of human chest was 1.0 to 20cm and tree height was 0.2 to 9m. As result of IR and GC-MS analysis, main component of Golden Lacquer was ${\beta}$-selinene and capnellane-8-one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.820-827
• /
• 2014

One of the basic problems in Wireless Sensor Networks (WSNs) is the localization of the sensor nodes based on the known location of numerous anchor nodes. WSNs generally consist of a large number of sensor nodes and recording the location of each sensor nodes becomes a difficult task. On the other hand, based on the application environment, the nodes may be subject to mobility and their location changes with time. Therefore, a scheme that will autonomously estimate or calculate the position of the sensor nodes is desirable. This paper presents an intelligent localization scheme, which is an artificial neural network (ANN) based localization scheme used to estimate the position of the unknown nodes. In the proposed method, three anchors nodes are used. The mobile or deployed sensor nodes request a beacon from the anchor nodes and utilizes the received signal strength indicator (RSSI) of the beacons received. The RSSI values vary depending on the distance between the mobile and the anchor nodes. The three RSSI values are used as the input to the ANN in order to estimate the location of the sensor nodes. A feed-forward artificial neural network with back propagation method for training has been employed. An average Euclidian distance error of 0.70 m has been achieved using a ANN having 3 inputs, two hidden layers, and two outputs (x and y coordinates of the position).

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.85-94
• /
• 2013

This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.981-994
• /
• 2016

Two field research stations based upon atmospheric corrosivity monitoring combined with reinforced concrete corrosion rate sensors have been established in Kuwait. This was established for the purpose of remote monitoring of building materials performance for concrete under Kuwait atmospheric environment. The two field research sites for concrete have been based upon an outcome from a research investigation intended for monitoring the atmospheric corrosivity from weathering station distributed in eight areas, and in different regions in Kuwait. Data on corrosivity measurements are essential for the development of specification of an optimized corrosion resistance system for reinforced concrete manufactured products. This study aims to optimize, characterize, and utilize long-term concrete structural health monitoring through on line corrosion measurement and to determine the feasibility and viability of the integrated anode ladder corrosion sensors embedded in concrete. The atmospheric corrosivity categories supported with GSM remote data acquisition system from eight corrosion monitoring stations at different regions in Kuwait are being classified according to standard ISO 9223. The two nominated field sites where based upon time of wetness and bimetallic corrosion rate from atmospheric data where metals and rebar's concrete are likely to be used. Eight concrete blocks with embeddable anodic ladder corrosion sensors were placed in the atmospheric zone adjacent to the sea shore at KISR site. The anodic ladder corrosion rate sensors for concrete were installed to provide an early warning system on prediction of the corrosion propagation and on developing new insights on the long-term durability performance and repair of concrete structures to lower labor cost. The results show the atmospheric corrosivity data of the environment and the feasibility of data retrieval of the corrosion potential of concrete from the embeddable sets of anodic ladder corrosion sensors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.31-41
• /
• 2006

Internet access from mobile phones over cellular networks suffer from severe bandwidth limitations and high bit error rates over wireless access links. Tailoring TCP connections to best fit the characteristics of this bottleneck link is thus very important for overall performance improvement. In this work, we propose a simple algorithm in deciding the optimal TCP segment size to maximize the utilization of the bottleneck wireless TCP connection for mobile contents server access, taking the dynamic TCP window variation into account. The proposed algorithm can be used when the product of the access rate and the propagation time is not large. With some numerical examples, it is shown that the optimal TCP segment size becomes a constant value when the TCP window size exceeds a threshold. One can set the maximum segment size of a wireless TCP connection to this optimal segment size for mobile contents server access for maximum efficiency on the expensive wireless link.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.98-107
• /
• 2015

It is investigated that there exists the possibility of the false target signals induced by reverberation in an active sonar system due to the internal waves in shallow water. The rays down-refracted from the internal waves may generate strong bottom-reverberation signals, which can result in false target signals. Sound waves emitted from a source propagate 3-dimensionally. Therefore, the study of internal waves on the reverberation should be studied for azimuthal direction as well as 2-dimensional (r-z) plane. Internal-wave modelling was conducted, based on solitons which were predicted with the various conditions such as, the range of source-soliton, horizontal widths of soliton. Variable depth sonar (VDS) was assumed as a source, of which the depth was located in the minimum sound speed layer in a simulation environment. Finally, the simulation on the reverberation level with time was made based on ray-based reverberation model, and the results implied that several false-target signals could be displayed on the PPI(Plan Position Indicator) scope simultaneously with range from source to soliton, and the horizontal width of soliton.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.63-72
• /
• 2011

Since the detection probability is critically dependent on the target strength (TS) in active sonar and on the radiated noise level (RNL) in passive sonar, the acoustic materials for echo reduction (ER) and transmission loss (TL) are widely used for the stealth of underwater targets. In this paper, a measurement system based on the small water tank, for the frequency range of greater than 30 kHz, is developed and verified using reference targets. In order to design the water tank and the geometry of test samples, a program is developed to calculate the arrival time of interfering signals due to the reflection from water tank walls and also due to the diffraction from the edge of the test samples. Considering all the interfering signals, an optimal experimental configuration for water tank and test samples is designed and used throughout the experiment. Next, the signal processing algorithms to estimate ER and TL are developed based on the measured propagation loss reflecting the geometric spreading characteristics of the transducer. Finally, a set of reference targets such as aluminium plate and perfectly reflecting plate are used in a small water tank to verify the developed measurement system.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.322-330
• /
• 2020

This study investigates the far-field noise from three Falcon 9 vehicle launches from Vandenberg Air Force Base, CA, USA, as measured from the same location within the nearby community of Lompoc. The overall sound pressure levels for the three launches are shown to be similar, but some differences in the early launch period are thought to be weather-related. The peak directivity angle in overall level is approximately 65 deg, which is consistent with horizontally-fired, static rocket data. For the third launch, waveforms and spectra are analyzed for different events during the launch sequence. The measured spectral bandwidth decreases with time, but spectral levels remain above the ambient noise throughout the main-engine firing. Additionally, late-launch phenomena observed in the data appear to be correlated with main-engine cutoff and second-stage engine start.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.51-57
• /
• 2008

We present a modeling of constraint satisfaction problems and provide heuristic algorithms of backtracking search to optimize the frequency assignment. Our research objective is to find a frequency assignment that satisfies all the constraints using minimum number of frequencies while maximizing the number of community radio stations served for a given area. In order to get a effective solution, some ordering heuristics such as variable orderings and value orderings are provided to minimize the backtracking in finding all solutions within a limited time. To complement the late detection of inconsistency in the backtracking, we provide the consistency enforcing technique or constraint propagation to eliminate the values that are inconsistent with some constraints. By integrating backtracking search algorithms with consistency enforcing techniques, it is possible to obtain more powerful and effective algorithms of constraint satisfaction problems. We also provide the performance evaluation of proposed algorithms by comparing the theoretical lower bound and our computed solution.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.751-758
• /
• 2002

Boreholes that are drilled in soft or unconsolidated materials such as gravels and coals are prone to collapse. To maintain the hole, some kinds of casing pipes are needed. If thereby a plastic pipe e.g. PVC is used for the casing, Televiewer tool is still capable of detecting structural features such as fractures in the borehole wall behind the pipe, whereas other borehole-imaging logging devices such as BIPS (Borehole Image Processing System) and FMS(Formation Micro Scanner) won't provide any information about that. Televiewer's primary component is a piezoelectric transducer centered in the hole. It acts as both a transmitter and receiver, and sends an ultrasonic beam. That is reflected, in the same manner as the seismic wave propagation, from the both sides(inner and outer surfaces) of the casing pipe, transmits through the pipe and then reflected from the borehole wall. With an appropriate choice of time-windowing, it is possible to capture the returning signals from both the borehole wall and the outer side of casing pipe as well. A suite of laboratory tests were performed on various physical models composed of plastic pipes with different diameters. Although the amplitudes of returning signals were reduced to about half the usual value due to the transmission loss, the dynamic range of Televiewer tool was sufficient to observe the structural features behind the casing pipe. Besides, several representative case studies at various research areas in our country are presented. The results demonstrate the usefulness of the transmissivity of Televiewer acoustic km, which will assist in further structural interpretation.