• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.83-91
• /
• 2000

This paper presents a new technique to reduce a large interconnect circuit with tens of thousands of elements into the one that is small enough to be analyzed by circuit simulators such as SPICE. This technique takes a fundamentally different approach form the conventional methods based on the interconnect circuit structure analysis and several rules based on the Elmore time constant. The time moments are computed form the circuit consisting of the interconnect circuit and the CMOS gate driver model computed by the AWE technique. Then, the equivalent RC circuit is synthesized from those moments. The characteristics of the driving CMOS gate can be reflected with the high degree of accuracy and the size of the compressed circuit is determined by the number of output nodes regardless of the size of the original interconnect circuits. This technique has been implemented in C language, applied to several interconnect circuits driven by a 0.5${\mu}m$ CMOS gate and the equivalent RC circuits with more than 99% reduction ratio and accuracy with 1 ~ 10% error in therms of propagation delays were obtained.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1708-1713
• /
• 2002

Endometrial explants obtained from does between days 13 and 21 of pregnancy were cultured in a modified minimum essential medium in the presence of [$^35S$]methionine and [$^3H$]-leucine. Proteins synthesized and secreted into medium were analyzed by fluorography of two-dimensional polyacrylamide gel electrophoresis and fluorography. No marked qualitative changes in patterns of protein production by caprine endometrium between days 13-21 of pregnancy. At least 11 proteins showed consistently a clear spot or a grouping of spots with characteristic location on two-dimensional gels. A major low molecular weight protein consisted of two major isoforms (pI 5.3-6.0) of similar molecular mass (21 kDa). Limited N-terminal sequence analysis of these two isoforms showed that the protein had complete homology with bovine placental and plasma retinol-binding protein (RBP) over the first 20 amino acids. Through use of the antiserum raised against bovine placental RBP, immunoreactive RBP was detected in cultures conditioned by uterine explants prepared at days 13, 15 and 21 of pregnancy. In the present study, proteins synthesized and secreted by caprine endometrium during periattachment period of early pregnancy were characterized. The pregnant endometrium secreted a number of neutral-to-acidic proteins which constituted, in part, the histotroph. A vitamin A-transport protein, RBP, was identified in cultures conditioned by endometrium of days 13-21 of pregnancy. The uterine endometrium is the only source of retinol for embryonic tissues. The uterine RBP appears to transport retinol locally toward embryonic tissues. Secretion of RBP by caprine endometrium of days 13, 15 and 21 of pregnancy suggested that retinol played an important role in conceptus development during periattachment period of early pregnancy.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.637-646
• /
• 2013

In order to model a variety of natural trees that are appropriate to outdoor terrains consisting of multiple trees, this study proposes a modeling method of new growth rules(based on the convolution sums of divisor functions). Basically, this method uses an existing growth-volume based algorithm for efficient management of the branches and leaves that constitute a tree, as well as natural propagation of branches. The main features of this paper is to introduce the theory of convolution sums of divisor functions that is naturally expressed the growth or fate of branches and leaves at each growth step. Based on this, a method of modeling various tree is proposed to minimize user control through a number of divisor functions having generalized generation functions and modification of the growth rule. This modeling method is characterized by its consideration of both branches and leaves as well as its advantage of having a greater effect on the construction of an outdoor terrain composed of multiple trees. Natural and varied tree model creation through the proposed method was conducted, and using this, the possibility of constructing a wide nature terrain and the efficiency of the process for configuring multiple trees were evaluated experimentally.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.385-393
• /
• 2006

In this paper, we proposed a location estimation algorithm considering an extension of searching area in 2.45GHz band RTLS and analyzed its performance in terms of an average estimation error distance. The extendable searching area was assumed to be square of $300m{\times}300m$ and 2 dimensions. The arrangement shape of available readers was considered circle, rectangle, and shrinkage rectangle for extendable searching area. Also, we assumed that propagation path was LOS (Line-Of-Sight) environment, and analyzed the estimation error performance as a function of the number of received sub-blink considering an arrangement shape of available readers in searching area. From the results, compared with rectangle shape, circle shape showed the higher estimation accuracy. Also, we confirmed that the proposed location estimation algorithm provided high estimation accuracy in the shrinkage rectangle shape that was suitable for extension of searching area.

• Journal of KIISE:Software and Applications
• /
• v.27 no.7
• /
• pp.691-701
• /
• 2000

Software documents consists of a number of objects and relationships between them, and structure of documents can be changed frequently. In this paper, we propose a version storage and consistency management model for fine-grained software objects based on operations applied to edit software objects. An object has an interface and can be updated only through operations defined in its interface. Operations applied to objects are recorded in the operation history, which is used to retrieve versions of a document and manage consistency between documents. Because versions of an object are stored and retrieved using the operation delta, it is not needed to compare versions of a document to extract delta and it is easy to identify the changes between versions in order to propagate the changes. Consistencies between documents are managed using dependencies between objects and kinds of the operations applied to the objects. Therefore unnecessary version propagation can be avoided. This paper presents a formal model of version retrieval and consistency management at the fine-grained level based on operations applied to the objects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.79-88
• /
• 2006

In the present paper, the swirl flow structure and flame characteristics of turbulent premixed combustion in a model gas turbine combustor are investigated using large eddy simulation(LES). A G-equation flamelet model is employed to simulate the unsteady flame behavior. When inlet swirl number is increased, the distinct flow structures, such as the shapes of corner recirculation and center toroidal recirculation zone, are observed and the flame length is shorted gradually. Also, the phenomena of flashback are identified at strong swirl intensity. In order to get the accurate description of unsteady flame behavior, the predictive ability of the acoustic wave in a combustor is primarily evaluated. It is found that the vortex generated near the edge of step plays an important role in the flame fluctuation. Finally it is examined systematically that the flame and heat release fluctuation are coupled strongly to the vortex shedding generated by swirl flow and acoustic wave propagation from the analysis of flame-vortex interaction.

• The Journal of Engineering Geology
• /
• v.6 no.2
• /
• pp.59-64
• /
• 1996

Acoustic Emission(AE) signals are emitted by a sudden release of strain energy associated with material damage. A multi-channels of LeCroy system and piezoelectric pressure transducers are employed for AE measurement to investigate the roles of AE in the propagation of macro cracks as well as the characteris-tics of AE wave in occurrence, amplitude and dominant frequency with changes in macro loading modes. Deduced crack opening volume of micro cracks varied widely and implies that AE events could be caused by crystal dislocations on a small scale and grain boundary movements on a large scale. Amplitude of first arrival AE wave emitted during mode I test was approximately 3 times higher than those from mixed mode test, while the number of AE count in mode I test was only 25% of mixed mode. It may imply that the total energy required for generation of a given fracture surface is similar regardless in change of macroloading modes.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.132-137
• /
• 2016

The genus Cypripedium, known as lady's slipper orchid, has been considered to have a considerable marketability as a potted and garden plant with beautiful flowers; however, this species is becoming endangered and, in some places extinct, due to habitat destruction and illegal collections. As such, an optimized artificial propagation system is necessary for its conservation and horticultural cultivation. For the establishment of the in vitro proliferation of the endangered Cypripedium macranthos Sw., native to Korea, the effects of medium strength and sucrose concentrations on germination, protocorm formation and seedling growth were investigated through asymbiotic seed culture. The highest germination rate and protocorm formation rate were obtained with a 1/4 MS medium; higher MS medium strengths did not generate the favorable conditions required for germination and protocorm growth. The overall growth characteristics of roots and buds developed from protocorms were best in cultures of 1/4 MS medium. On this medium containing $10g{\cdot}L^{-1}$ sucrose, both the germination rate and protocorm formation rate increased significantly. The general growth properties of seedlings developed on the medium with $10g{\cdot}L^{-1}$ sucrose were best, showing the highest bud formation rate and root number. Our results demonstrate that the 1/4 MS medium, supplemented with $10g{\cdot}L^{-1}$ sucrose, could improve in vitro germination, and facilitate the growth of seedlings developed from the protocorms of C. macranthos Sw.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.193-198
• /
• 2017

Alloy 617 is one of the primary candidate materials to be used in a very high temperature reactor (VHTR) system as an intermediate heat exchanger (IHX). To investigate the low cycle fatigue behavior of Alloy 617 weldments at a high temperature of $850^{\circ}C$, fully reversed strain-controlled fatigue tests were conducted with the total strain values ranging from 0.6~1.5％. The weldment specimens were machined using the weld pads fabricated with a single V-grove configuration by gas tungsten arc welding (GTAW) process. The fatigue life is reduced as the total strain range increases. For all testing conditions, the cyclic stress response behavior of the Alloy 617 weldments exhibited the initial cyclic strain hardening phenomenon during the initial small number of cycles. Furthermore, the overall fatigue cracking and the propagation or cracks showed a transgranular failure mode.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.16 no.1
• /
• pp.31-49
• /
• 2012

In this paper, we propose a very efficient method which reconstructs the high resolution surface from a set of unorganized points. Our method is based on the level set method using adaptive octree. We start with the surface reconstruction model proposed in [20]. In [20], they introduced a very fast and efficient method which is different from the previous methods using the level set method. Most existing methods[21, 22] employed the time evolving process from an initial surface to point cloud. But in [20], they considered the surface reconstruction process as an elliptic problem in the narrow band including point cloud. So they could obtain very speedy method because they didn't have to limit the time evolution step by the finite speed of propagation. However, they implemented that model just on the uniform grid. So they still have the weakness that it needs so much memories because of being fulfilled only on the uniform grid. Their algorithm basically solves a large linear system of which size is the same as the number of the grid in a narrow band. Besides, it is not easy to make the width of band narrow enough since the decision of band width depends on the distribution of point data. After all, as far as it is implemented on the uniform grid, it is almost impossible to generate the surface on the high resolution because the memory requirement increases geometrically. We resolve it by adapting octree data structure[12, 11] to our problem and by introducing a new redistancing algorithm which is different from the existing one[19].