• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.585-588
• /
• 2003

A development scheme for reliable radio-wave Propagation model of digital television (DTV) service, adequate to the domestic environment, is proposed in this paper. Throughout the analysis of several ITU-R recommendations on propagation models in DTV band, ITU-R P.1546, which is based on experimental data, has been selected as our basic model. This model has been programmed, not only to be directly used for engineering analysis, such as frequency assignment, licensing, interference analysis, and sharing frequency bands, but also to be applied for development of a propagation model adequate to the specific environment. Furthermore, the procedure of developing domestic propagation model for DTV service, combined with experimental data which is now being obtained, has been described in this paper.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.204-209
• /
• 2001

The more sophisticated patterns of propagation model is presented in this paper, which includes three different source characteristics (spherical, cosine and dipole). The spherical, cosine and dipole radiation characteristics compared, and sound event level and the maximum sound level are calculated by experiment and calculation. It is shown that patterns of propagation have dipole characteristics for low speed range (below about 150Km/h) at electric multiple system. We know that push-pull high speed system has cosine characteristics of noise propagation at low speed range (below about 200Km/h).

• Journal of Welding and Joining
• /
• 제6권3호
• /
• pp.43-55
• /
• 1988

An experimental study was carried out to identify the fatigue fractue behavior of weld zone in generally rolled steel for marine structure. The bending an shear loads were applied simultaneously on the specimens to simulate real load condition for marine structure. The effect of the stress intensity factor under mode I with II loading condition on the initiation and the propagation of a crack were investigated, with particular emphaiss on mode II. When the $K_{II}$ stress intensiy factor in mode II was applied under mode I load condition, the growth behavior of a crack seems to be affected mainly by the anisotropic characteristic of materials. Especially, when the crack was located in and near the weld zone and parallel to th weld line, the propagation behaviour was turned out to be quite different from that of the base metal along the direction transverse to the weld line. In general, the propagation veiocity of the cracks in and near the weld zone was found to be slower that the velocity in base metal.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.152-158
• /
• 2005

The stress conditions acting on the practical structure are complex, and thus most cracks existing in the practical structures are under mixed-mode loading conditions. The effect of shear load component of mixed-mode loading acts more greatly in the stage of crack initiation and initial propagation than crack propagation stage. Hence, research on the behavior in the stage of crack initiation and initial propagation need to be examined in order to evaluate behavior of mixed-mode fatigue cracks. In this study, the crack tip displacement(CTD) was measured by using the direct measuring method(DMM). We examined the behavior at crack tip by determining crack opening load$(P_{op})$. From the test results, the propagation behavior of mixed-mode fatigue cracks was evaluated by considering mixed-mode crack closure. Also, we examined the characteristic of crack propagation under mixed-mode loading with crack propagation direction.

• Spatial Information Research
• /
• 제21권5호
• /
• pp.63-72
• /
• 2013

본 연구에서는 무주 남대천을 대상으로 재귀호출 알고리듬을 이용하여 제방 파제시 홍수위별 홍수전파 특성을 분석하였다. 먼저 벙구보와 차산보를 파제 지점으로 설정하여 재귀호출 알고리듬에 의한 홍수위별 홍수전파 차수를 분석하였으며, 홍수전파 차수별 격자수와 누계 침수면적을 계산하였다. 또한 홍수전파 차수와 DEM 격자크기를 기준으로 홍수위별로 홍수가 전파되는 시간을 계산하였다. 재귀호출 알고리듬에 의한 홍수전파 차수의 분포특성을 통해 홍수 전파 과정을 파악할 수 있었으며, 홍수전파 차수별 누계 침수면적 그래프의 기울기 패턴을 통해 홍수에 취약한 지역을 선정함으로써 수재해 업무에 기초자료로 제공할 수 있었다. 또한 홍수위별로 홍수전파 시간을 계산함으로써 홍수시 주민들의 대피경로 및 대피시간과 같은 계획을 수립하는데 매우 효과적인 정보를 제공해 줄 수 있을 것으로 판단된다.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.614-620
• /
• 1998

본 논문에서는 타원형 커루게이트 도파관의 전파 및 복사특성을 이론적으로 해석한다. 타원형 원통 좌표계에서의 파동방정식의 해는 제1종 및 제2종의 Mathieu함수들로 얻어진다. 타원형 커루게이트 도파관의 전계와 자계들은 반경방향과 각 방향의 Mathieu함수들의 곱의 급수로 나타낼 수 있다. 슬랏 영역과 안쪽 영역의 경계면에서 임피던스 매칭 방법을 사용하여 특성 방정식을 얻는다. 타원형 커루게이트도파관에서의 주모드인 $HE_{11}$모드에 대한 특성방정식을 풀어 어퍼춰에서의 전자계를 계산하고, 또 계의 등가원리(field equivalence principle)를 이용하여 타원형 커루게이트 도파관에서의 복사패턴을 계산한다.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.3075-3083
• /
• 1994

The applications of the electrical transmission line theory to the pressure propagation characteristics in the volume loaded fluid transmission line with step and impulse input wave is demonstrated in this paper. The method is based on the premise that the time response is the inverse Fourier transform of frequency spectrum of the wave which spectrum is a product of frequency spectrum of input pressure wave and system transfer function. The frequency response and transient response of step and impulse input wave in the volume loaded fluid transmission line is analysed by the Laplace transform and inverse Laplace transform with FFT numerical algorithm. The numerical solution of the distributed friction model is compared with the average friction model and the infinite product model. And the result is showed that FFT method may have major advantages for the simulation of fluid circuitary.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.181-189
• /
• 2001

For the Tailor Welded Blank sheet used fur automobile body panel, the characteristics of fatigue crack propagation behavior were studied. The thickness of specimen was machined to be same (0.9+0.9mm) and different (0.9+2.0mm). As a base test, mechanical properties around welding zone were examined. The results indicated that there were no significant decreases in mechanical properties, but hardness around welding bead is 2.3 times greater than base material. The crack propagation rate was noticeably decreased around welding line and rapidly increased as it passed by welding line. Reviewing the shape of the crack propagation, crack width around welding line was wide around the welding zone due to retardation of crack growth, but it became narrow passing welding line due to decreased toughness. Elasto-Plastic analysis was performed by finite element analysis fur explaining the test results.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.338-342
• /
• 2006

The kinetic features of polymerization with an active site comprising cobalt dihalides ($CoX_2$, where X=Cl, Br, I) activated by methylaluminoxane (MAO) were investigated in 1,3-butadiene polymerization. The catalytic system exhibited the characteristic features of living polymerization. The initiation ($k_i$) and propagation ($k_p$) rate coefficients were estimated using the kinetic model for slow initiation previously reported by Shiono et al. The energy of activation fur the propagation reaction was calculated to be 27-30 $kJmol^{-1}$. The marked changes in reaction rate observed with different halides could be adequately described in terms of variations in the initiation process, with the same Arrhenius curve fitting propagation rate coeffcients estimated from all three halides, suggesting that the halide does not participate in the growing chain end.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1091-1098
• /
• 2012

This paper describes frequency response and propagation characteristics considering semiconducting screen in distribution cables. In CIGRE WG 21-05, Simplified Approach(SA) and Rigorous Approach(RA) which can revise the permittivity considering semiconducting screen propose for more detailed EMTP model and frequency dependant analysis. In this paper, the frequency dependent characteristics of complex permittivity are variously analysed by cole-cole function of RA. The attenuation, propagation velocity and surge impedance according to frequency range(1 kHz to 500 MHz) and cable length are also analysed by SA and EMTP simulation in distribution cables. The propagation velocity considering semiconducting screen is slower, and it is saturated over the range of 1 MHz. The signal is significantly attenuated as frequency range is high.