• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.33-38
• /
• 2005

It is applied in the high quality equipment construction by introduction of this high duality treating technology (ozone treating, activated carbon treating, high quality oxidation treating, UV treating etc.)waterproofing or corrosion proof method caused secondary economy damage of operation discontinuance and high quality treating equipment for applying existent waterproofing method that corrosion proof ability (ozone resistance performance, chemical resistance etc.) and abrasion resistance performance by comprehension insufficiency of user and designer. Therefor, In this study, we will analyze problem of waterproofing and corrosion material of existing construction application by high quality treating, and measure physical performance change by various condition. It is required to waterproofing and corrosion system and application of the field valuation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.128-129
• /
• 2016

This paper evaluates experimentally the explosion proof of fiber reinforced cement composite(FRCC) panels with various fibers of 2 % volume fraction subjected to contact explosions using an emulsion explosive. As a results, the proportion of the total damage in FRCC panels is not biased scabbing on the rear side with contrast to plain panels, which means that the local damage of FRCC panels was significantly controlled. The experimental results presented useful information for prediction of limited thickness on the local damage subjected to contact explosions through comparison with existing damage evaluation prediction equations.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2001

This study was carried out to develop a new insolubilizer for water resistency enhancement and to evaluate its optimum apply method to corrugated paper. The addition of polyvinyl alcohol(PVA) backbone polymer to conventional starch glue caused a poor dispersibility, but flavonoid resin addition showed a good runnability and water resistency. The double coatings(top & under) of water-proof chemicals to corrugating liner made even better the water resistency of corrugating paper. This study suggested that water-proof chemical treatments be an effective method in water-resistant corrugating paper manufacturing for a cold chain system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.69-73
• /
• 2018

Korean-peacekeeper's transparent armors in Iraq showed delamination, cracking and clouding a decade ago. And there were also similar deterioration recurrences in KLTV during the operational test a few years ago. Also, the differences between operational capability & lab Bullet-proof test condition, and insufficiency of military protection spec resulted in incomplete bullet-proof results. Moreover, although so many ground weapon systems have been developed, there were not secure test & evaluation codes to verify transparent armoured glasses equal to advanced-overseas products. So in this study, first, environmental test codes were established that all tests should be carried out as the application of only one specimen with newly adopted thermal shock test instead of completing each test with different one. Second, protection standards were integrated through the analysis of global developed country's specifications and reinforced as adding to the real mock-up condition if vehicle's glasses are smaller than standard specimen. Hereby, by applying to test-codes which including actual operational & vehicular conditions, the gap between development test and operational environment was minimized.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.652-655
• /
• 2004

In these days, repair materials for leakage cannot help but being taken in temporary way without any noticeable countermeasure. This kind of repair is socially criticized many times that is defective construction even if tills costs a lot. It was not arrange the standard for performance evaluation test method and quality maintenance for materials, even it has been used various injection repairing agent. In conclusion, We suggest that the test method for repair materials for leakage to establish the leakage repairing technology as increase of structure demand, so that the necessity of the establishment of the quality control standard and the performance testing way on the relevant water-proof seal is increasing a lot to regulate the water-proof technology and the leakage repair technology.

• Journal of applied mathematics & informatics
• /
• v.29 no.1_2
• /
• pp.505-510
• /
• 2011

We give a constructive proof that a (partial) evaluation of a multivariate algebraic function with algebraic numbers is again an algebraic function. Especially, we obtain a bound on the degree of an evaluation with the degrees of the original algebraic function and the algebraic numbers evaluated. Furthermore, we show that our bound is sharp with an example.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.422-427
• /
• 2010

The judgement of 'Koreon Maritime Safety Tribunal'(KMST) influences criminal/civil trials, and thus the judgement must be decided very carefully. The Judge must bear in mind the Principle of Free Evaluation of Evidence is restricted by the admissibility of evidence, in dubio proreo and others. Also, empirical role must be used very carefully with strict proof. Therefore the reasons of the proof shall be expressed on the adjudication.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.5
• /
• pp.76-82
• /
• 2010

In this study, we carried out to evaluate the shock-proof of a large scale motor for the naval vessel using dynamic design analysis method (DDAM) and full transient dynamic analysis. Analytical models for main assemblies (motor frame, rotor and stator assembly) were consisted of the tetrahedral solid elements and the equipments which installed in the upper side of the motor were substituted the mass elements. And we also modelled resilient mounts of a motor using the beam elements with appropriate directional stiffness. The DDAM was conducted according to NRL memorandum report 1396 and the full transient dynamic analysis was performed applying directional triple half triangle shock wave to the motor using ANSYS 12. As a result, we could compare of the results according to each analytic method and find the motor to satisfy the design criteria of the maximum stress and deformation.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.135-141
• /
• 2004

Anti-shock performance is one of the most important design specifications of TFT-LCD modules. Since they are adopted fur major display units of many mobile applications such as lap-top PCs, cellular phones, and palm pilots, they are able to accommodate and endure high level transient mechanical energy inputs. For the reasons, not only the LCD unit manufacturers but their customers like PC makers perform a series of strict impact/drop test on the units. Currently, designers are mostly relying on their own trial-error based experience for the anti-shock design. Thus those designs depending on only experience may result in disqualification from the drop/impact test during final product evaluation. Those shock failures of any new designs are prohibitive for both LCD and PC manufacturers. In order to avoid this problem, many designers are focusing on the development of computer-aided design tools that is directly connected to shock simulation capabilities and then shock-proof design cycle time could be significantly reduced. Development of an integrated CAE system for the shock-proof design is presented in this article. At every stages of the development of present work, practical industrial applicability and mass production feasibility are seriously considered and tested so that the system is to be used in the LCD design engineering field.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1178-1187
• /
• 2006

The purpose of this study is to conduct a questionnaire survey on the actual conditions of the working uniform and protective equipment put on by street cleaners, then to identify their inconvenience and problems and to draw solutions to improve them, and finally to design a spring-and-autumn street cleaner uniform which has enhanced functionalities such as motional flexibility, safety and soil proof. The questionnaire survey of this study was done by street cleaners who were in charge of street cleaning and collecting the recyclable waste. The result of this study, easily worn-out parts of the working clothing were the sleeve hems and the front part on the upper uniform, and the trouser hems and zipper on the lower uniform. Easily soiled parts were the sleeve hems, parts of arm on the upper uniform, and the trouser hems and knee parts on the lower uniform. Based on the results of the questionnaire survey, the sample uniforms were designed in consideration of material, design and pattern. A soil-proof material was used for easily soiled parts such as sleeve hems, knee parts and trouser hems. Reflective material was applied to the parts such as chest, back and the side lines of sleeves and trousers to raise visibility in working and to ensure safety. A crease was given to each side of the back. The height of sleeve cap was lowered to lift the motional flexibility of back and arm parts. Darts were applied to elbow and knee parts for a three-dimensional design. Gussets were inserted in the thigh part to give it activity. Then quantitative evaluation and a sensory evaluation, which was composed of outward appearance, motional flexibility and fitness for field operation, were conducted. According to these evaluations, the sample uniform was found to be more satisfactory than current uniform.