• 제목/요약/키워드: Prone compression study

검색결과 18건 처리시간 0.032초

비만환자의 위장조영술에 있어 복와위 압박법의 적용에 관한 연구 (A study on the Application of Prone Compression Study for Obese Patients in Upper Gastrointestinal Series)

  • 손순룡;정홍량
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제22권2호
    • /
    • pp.9-15
    • /
    • 1999
  • The aim of this study is to measure the application of prone compression study using compression paddle for obese patients in upper gastrointestinal series. Prone compression study using compression paddle was performed in fifty patients, who were not examined completely erect compression study for obesity. The radiographs of stomach were classified into the lower, middle, and high body and then we gave five points included 'very poor', 'poor', 'suspicious', 'good', and 'complete' according to level of detection for area gastrica and mucosal fold. Statistic analysis was performed using T-test and ANOVA, and confidence rate was fixed in 95%(P<0.05) for the significance. The results were as follows : 1. The compression marks on high body was 'poor' grades in erect and prone compression study. The points were 1.64 and 1.86, respectively. 2. The compression marks on middle body was 1.68 in erect compression study, and 'suspicious' in prone compression study. 3. The compression marks on lower body was 'poor' in erect compression study, and 'good' in prone compression study. 4. There was a high statistic signification between the two study on middle and lower body except for high body(P<0.01). 5. The average abdominal thickness of subjects was 23.98 centimeter. There was no statistic signification between the difference of average marks by the abdominal thickness(P>0.05). As these results, the prone compression study in upper gastrointestinal serie seem to be an useful study for obese patients, because it decreases pain and the feeling of uneasiness, and improve compression efficiency remarkably.

  • PDF

압박 벨트와 비탄력 테이프를 이용한 골반압박이 엎드려 고관절 신전 시 체간과 고관절 신전근의 근 작용에 미치는 영향: 요통 경험군과 요통 비경험군 비교 연구 (Pelvic Compression Using a Compression Belt and Non-elastic Taping on Trunk and Hip Extensor Muscle Activity during Prone Hip Extension: A Comparative Study of Experienced and Non-experienced Low Back Pain Group)

  • 박소현;김선엽
    • 대한정형도수물리치료학회지
    • /
    • 제27권2호
    • /
    • pp.27-36
    • /
    • 2021
  • Background : Prone hip extension (PHE) is commonly used for exercises and tests in patients with low back pain. Previous studies have shown that pelvic compression belts (PCB) and non-elastic taping (NET) contribute greatly to improvements in lumbopelvic stability. This study aimed to compare the effect of two lumbopelvic stability methods such as PCB and NET on the trunk and hip extensor muscle activities during PHE tests. Methods: Subjects who experienced low back pain (low back pain group, LBPG; n=20) and those who did not experience low back pain (non-LBPG; n=20) participated in this study. The subjects were instructed to perform PHE with and without a PCB and NET. PHE tests were performed in the condition wherein the two stabilization methods were applied, and the actions of the muscles at that time were measured using surface electromyography (EMG). EMG data were collected from the hamstring, gluteus maximus, erector spine (ES), and multifidus (MF) muscles. The data were collected three times for 5 s with a 1-min rest between each of the three sets. Results: In the LBPG, EMG of the ES muscle was significantly reduced when NET or a PCB was applied (p<.05). There was no difference in the change in the ES muscle activity when NET and a PCB were applied. The ratio of MF/ES muscleactivity showed a significant increase in the LBPG with NET (p<.05). Conclusion: Both NET and PCB applied to subjects who experienced low back pain significantly reduced the ES muscle activity during PHE exercises and helped control the balance of the superficial and deep trunk extensor muscles.

둥근 어깨가 있는 대상자에게 골반 압박 벨트 적용을 동반한 어깨 안정화 운동의 수행이 어깨관절 주위 근육의 근활성도와 통증 및 기능에 미치는 영향 (Effect of Shoulder Stabilization Exercise with Pelvic Compression Belt Application on Muscle Activity, Pain and Function of Muscles around Shoulder Joint in Subjects with Round Shoulders)

  • 김충유;이연섭;김현수
    • 대한통합의학회지
    • /
    • 제10권4호
    • /
    • pp.199-207
    • /
    • 2022
  • Purpose : The purpose of this study is to investigate the effect of shoulder stabilization exercise accompanied by application of a pelvic compression belt on the muscle activity, pain and function of the muscles around the shoulder in subjects with round shoulders. Methods : For the study method, 28 students who were enrolled in K University with a distance of 1 cm or more between the clavicle of the peak and the outer ear path were selected through GPS 400 global postural analysis system measurement. The subjects were randomly assigned to 14 participants in the group wearing a pelvic compression belt and 14 patients in the group not wearing a pelvic compression belt. In all subjects, the muscle activities of the middle trapezius, lower trapezius, and serratus anterior muscles and the shoulder pain disorder index (SPADI) were measured. The intervention was performed 3 times a week for 4 weeks, and the applied intervention was push-up plus and modified prone cobra exercise. The muscle activities of the middle trapezius, lower trapezius, and serratus anterior muscles and SPADI score were compared using dependent t test before and after intervention. Results : In this study, both groups showed that the muscle activity of the middle trapezius, lower trapezius, and serratus anterior significantly increased after the intervention compared to before the intervention. On the other hand, SPADI showed no significant difference. Conclusion : The results of this study showed that muscle activity in the peri-shoulder joint was increased after push-up plus and modified prone cobra exercise in both groups, regardless of whether pelvic compression was applied or not. Therefore, it was found that shoulder stabilization exercise using the pelvic compression belt also contributed to the enhancement of muscle activity in the joints around the shoulder.

골반압박벨트가 뭇갈래근과 척추세움근의 근두께에 융합적으로 미치는 영향 (Pelvic Compression Belt Convergence Impact on the Thickness of Multifidus and Erector Spinae Muscles)

  • 백인철;심재훈
    • 한국융합학회논문지
    • /
    • 제7권5호
    • /
    • pp.51-57
    • /
    • 2016
  • 본 연구는 초음파 영상(ultrasound imaging)을 이용하여 네발기기 자세(quadruped position)에서 골반압박벨트(pelvic compression belt)가 뭇갈래근과 척추세움근의 근두께에 융합적으로 미치는 영향을 알아보기 위해 실시되었다. 대상자는 30명의 남자대학생으로 실험에 자발적으로 참여한 자로 선정하였다. 골반압박벨트를 위앞엉덩뼈가시아래(anterior superior iliac spines)에 착용한 상태와 착용하지 않은 상태에서 네발기기 자세를 실시하였고, 초음파영상 진단장치를 이용하여 근 두께를 측정하였다. 자료분석은 반복측정분산분석을 이용하였다. 연구결과, 뭇갈래근의 경우 골반압박벨트를 착용하였을 때가 착용하지 않았을 때보다 근두께가 유의하게 증가하였고(p<.05), 척추세움근의 경우도 골반압박벨트를 착용하였을 때가 착용하지 않았을 때보다 근두께가 유의하게 증가하였다(p<.05). 따라서 본 연구결과를 통해 골반압박벨트의 착용이 요통환자에게 효과적이며, 임상에서 다양한 네발기기 자세운동의 처방과 적용 시에 유용한 자료로 활용하고자 한다.

위 전벽 병변 진단을 위한 UGI series의 실태 및 개선방안에 관한 고찰 (A Study of UGI Series for Improvement of Diagnosis on the Anterior Wall of the Stomach)

  • 이원홍;손순룡;강형욱
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제20권2호
    • /
    • pp.63-67
    • /
    • 1997
  • This paper is to investigate a more detailed method for the diagnosis of anterior wall of the stomach by making a comparative study with several hospitals. It has been true that there have been hospitals, that have not examined anterior wall of the stomach. However, it is very important for us to examine anterior wall of the stomach for an carly detection of gastric carcinoma. The results of th study are as follows : 1. Frequency of occurrence of the early gastric carcinoma for the anterior wall were 50 cases and 34 cases for the posterior wall out of 84 cases. 2. Only a hospitals have examined the anterior wall of stomach. 3. In case of operation, only a hospitals have used two techniques at for same time single and double contrast studies. 4. Only cue hospital used a compression pad and three hospitals hod only filing state images taloen. 5. In general, 1 chest of film was used and the number of exposures rouged from 1 to 2 times. Lesions on the anterior wall of the stomach can be shown by the combination of prone single com-pression and supine double contrast radiographs. Therefore, the conclusion came to the result that the prone single compression and supine double contract technique of the anterior wall are Indispensable methods to the routine check of the stomach.

  • PDF

DME 체적탄성계수의 측정 및 계산 (Measurement and Calculation of Bulk Modulus for DME)

  • 조승환;이범호;이대엽
    • 대한기계학회논문집B
    • /
    • 제32권11호
    • /
    • pp.841-848
    • /
    • 2008
  • DME(Di-methyl Ether) has been expected to be one of the promising alternative fuels for compression ignition engines due to its low emission characteristics for particulate matter. However, its physical properties such as density, bulk modulus and viscosity are not comparable to those of conventional diesel fuel. Especially, problems caused by low lubricity and high compressibility need to be understood more thoroughly, when a DME fuel is used for compression ignition engine, especially with mechanical fuel supply system. In this study, measurement and calculation of DME's bulk modulus were carried out over the range of temperatures from $-3^{\circ}C$ to $53^{\circ}C$, and pressures from 50 bar to 250 bar using an experimental apparatus built in this work. The results show that DME is prone to be compressed more easily compared to diesel fuel. A comparison of bulk modulus with butane and propane were also made in this work.

펄트루젼 I형 FRP 압축재의 설계 (Design of Pultruded I-shape FRP Compression Member)

  • 주형중;이승식;이종석;윤순종
    • Composites Research
    • /
    • 제25권2호
    • /
    • pp.46-53
    • /
    • 2012
  • 펄트루젼 공정에 의해 생산된 FRP 부재는 길이에 제한이 없이 임의의 단면형상으로 제작할 수 있기 때문에 건설 구조용 부재로 사용하기 적합하며, 특히, 각종 화학적 유해환경 등에서 그 성능이 우수하기 때문에 습윤환경 및 해양환경 등의 부식환경에서 그 활용이 두드러지고 있다. 그러나 설계를 위한 관련 규준이 마련되어 있지 않아 이에 대한 연구가 시급한 실정이다. FRP 구조재는 대부분 단면의 효율적 사용을 위해 판요소로 구성된 박판부재를 사용하고 있으며, 이러한 부재를 압축재로 사용할 경우 강도한계상태는 주로 좌굴거동에 의해 결정된다. 이 연구에서는 FRP I형 단면 압축재에 대한 좌굴거동을 이론적으로 해석하였고, 기존 실험적 연구결과와 비교, 분석하여 설계방법 및 설계흐름도를 제안하였다. 제안된 설계방법은 ANSI/AISC 360-10의 방법과 유사한 형태로서 설계자의 편의를 도모하였으며, 비교적 간단한 방법에 의해 PFPR I형 단면 압축재의 설계를 수행할 수 있도록 하였다.

Clinical characteristics of trigeminal neuralgia in a dental hospital

  • Noguchi, Tomoyasu;Shimamoto, Yoshinori;Fukuda, Ken-ichi
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제21권5호
    • /
    • pp.431-440
    • /
    • 2021
  • Background: Neurovascular compression (NVC) is a well-known cause of trigeminal neuralgia (TN). However, patients with idiopathic TN (ITN) do not have evidence of NVC on magnetic resonance imaging (MRI), and other patients may remain asymptomatic despite evidence of NVC on MRI. This suggests that there may be additional risk factors for TN development other than NVC. Although epidemiological factors, such as age and sex differences, are useful for understanding the pathophysiology of TN, detailed statistics for each TN subtype are currently unavailable. Therefore, this study aimed to classify patients with TN into the following groups based on data extracted from past medical records: classical TN (CTN), secondary TN, and ITN. Methods: The characteristics of the groups and their differences were explored. Results: CTN was more common in women than in men, as previously reported, whereas ITN was more common in men than in women. The ratio of pain sites located on the right side of the face was high in all groups. Patients with CTN were also prone to NVC on the asymptomatic side. Conclusion: By investigating TN subtype, it may be possible to elucidate the pathophysiology of TN. This would greatly improve treatment outcomes.

Irregular Failures at Metal/polymer Interfaces

  • Lee, Ho-Young
    • 한국표면공학회지
    • /
    • 제36권4호
    • /
    • pp.347-355
    • /
    • 2003
  • Roughening of metal surfaces frequently enhances the adhesion strength of metals to polymers by mechanical interlocking. When a failure occurs at a roughened metal/polymer interface, the failure prone to be cohesive. In a previous work, an adhesion study on a roughened metal (oxidized copper-based leadframe)/polymer (Epoxy Molding Compound, EMC) interface was carried out, and the correlation between adhesion strength and failure path was investigated. In the present work, an attempt to interpret the failure path was made under the assumption that microvoids are formed in the EMC as well as near the roots of the CuO needles during compression-molding process. A simple adhesion model developed from the theory of fiber reinforcement of composite materials was introduced to explain the adhesion behavior of the oxidized copper-based leadframe/EMC interface and failure path. It is believed that this adhesion model can be used to explain the adhesion behavior of other similarly roughened metal/polymer interfaces.

IoT 수집 서버를 위한 공간효율적 압축-칼럼 관리 (Space-Efficient Compressed-Column Management for IoT Collection Servers)

  • 변시우
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제9권1호
    • /
    • pp.179-187
    • /
    • 2019
  • 소형 컴퓨팅 기기의 최근 발달과 더불어, 사물인터넷 기반 센서 네트워크가 광범위로 확산되고 있으며, 이제는 저렴한 비용으로 센서 연산 기능과 통신 기능을 사용가능하게 되었다. 센서 데이터 관리는 사물 인터넷 환경에서 주요한 요소이다. 센싱 장비로부터 발생되고 전파되는 엄청난 분량의 자료는 많은 유효 정보를 제공하고 사업추진을 위한 다음세대의 빅데이터로 생각되고 있다. 최신 컬럼 기반 압축 기법이 높은 공간 효율 때문에 대용량 서버에 장착되고 있다. 센서는 좁은 대역폭과 오류가 많은 무선 채널을 사용하므로, 센서 기반 저장 시스템은 불안정한 데이터 서비스에 노출되어 있다. 본 연구에서는 사물 인터넷 센서망에 대한 분석을 간략하게 서술하며, 사물 인터넷을 위한 신규 스토리지 관리 방법을 제안한다. 제안한 관리 방법은 레이드 스토리지 모형을 근거로 하고, I/O 성능의 감쇄 없이 공간 효율성을 높이기 위하여 컬럼 기반 분리 및 압축법을 활용한다. 컴퓨터 모의 성능 실험을 통하여 본 제안 저장 기법이 기존 Raid 제어 기법보다 우수하다는 결론을 얻었다.