• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.190-191
• /
• 2012

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.7-11
• /
• 2001

In this paper, trapezoid sections and prominence sections were examined to improve the performance of floating breakwater in long waves. The linear potential theory is used and the boundary element method with a matching boundary is employed for numerical computation. The effects of the side slope of the trapezoid section and the geometry ratio of the prominence section on the floating breakwater were examined. It was found that trapezoid sections show lower transmission coefficients than the rectangular sections in the long wave range. In prominence sections the size of the sides are more important than the size of the top. Proper choices of the pontoon type geometry may move the local minimum point of the wave transmission coefficient toward the longer wave ranges and improve the performance of the floating breakwater in the long wave range for a given wave period.

• Archives of Craniofacial Surgery
• /
• v.22 no.2
• /
• pp.78-84
• /
• 2021

Background: Facial feminization surgery and malarplasty require information concerning facial features in the malar area. Such information varies as a function of sex and race. The objectives of this study aimed to quantitatively evaluate the location of malar prominence across sexes in the Southeast Asian population, and identify sex-specific differences in malar prominence using a combination of two-dimensional (2D) computed tomography (CT) and three-dimensional (3D) CT. Methods: The location of malar prominence was evaluated in 101 Thai adults, consisting of 52 men and 49 women. This study used both 2D CT and 3D CT to achieve greater accuracy, in which 2D CT was used to measure malar distance, malar summit width, facial width, and malar summitto-facial width ratio whereas 3D CT was used to evaluate the positional relationship between the zygomatic summit and four reference points of the zygoma. Results: The malar summit was positioned more laterally in males (p< 0.01) and was more projected in females (p= 0.01). The other 2D-parameters were wider in males. The ratio between the malar summit width and facial width showed similar results for both sexes. The vertical dimension did not show any statistically significant differences; however, a higher summit position was observed in males. Conclusion: The zygomatic summit is positioned more laterally in males and is more projected in females. However, the ratio was similar, which indicates that the male cranium is larger in size. Based on the results in this study, when facial feminization surgery or malarplasty is performed on a Southeast Asian patient, the malar bone should be reduced horizontally and moved forward for better outcomes.

• Journal of the Korean Home Economics Association
• /
• v.41 no.6
• /
• pp.119-129
• /
• 2003

This study was peformed to establish the standard size system to be required for the production of brassiere. The subject were 155 Korean twenties-aged women and were directly measured anthropometrically. From 27 measurements, 5 factors were extracted through factor analysis. The accumulative contribution ratio is 76.92％. Factor 1 indicates the degree of obesity around the chest, factor 2 is the drooping degree of breast, factor 3 is the contours and prominence, factor 4 is the breast breadth and breadth of bust point, factors 5 is the volume of breast. The subject were classified into 3 cluster as their breast types through cluster analysis. Type 1 is the closest to the ideal breast shape and not too droopy. This group belonged to 75A. Type 2 has small breast and belonged to 70AA group. Type 3 is the obesest and has the biggest and droopy breast. This group belonged to 75B. The distribution of size of brassiere had 3 sections from 70 to 80 showing a rate of 81.94% and the sin of the cup had 4 sections from AAA cup to B cup showing a rate of 89.70％. The production ratio of each brassiere size, it was found that the brassiere size of highest production ratio was 75A(16.39％) in type 1,70AA(16.27%) in type 2, and 75B(13.72％) in type 3. This suggests that it is necessary to adjust for the production rate of brassieres.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.298-303
• /
• 2023

This study aimed to investigate the clinical utility of voiced sentence tasks for voice evaluation. To this end, we analyzed the correlation between perturbation-based acoustic measurements [jitter percent (jitter), shimmer percent (shimmer), Noise to Harmonic Ratio (NHR)] using sustained vowel phonation, and cepstrum-based acoustic measurements [Cepstral Peak Prominence (CPP), Low/High spectral ratio (L/H ratio)] using voiced sentences. As a result of analyzing data collected from 65 patients with voice disorders, there was a significant correlation between the CPP and jitter (r = -.624, p = .000), shimmer (r = -.530, p = .000), NHR (r = -.469, p = .000).This suggests that the cepstrum measurement of voiced sentences can be used as an alternative to the analysis limitations of the pathological voice such as not possible perturbation-based acoustic measurement, and result difference according to the analysis section.

• Speech Sciences
• /
• v.9 no.1
• /
• pp.77-88
• /
• 2002

Acoustical correlates of stress can be classified as duration, intensity and fundamental frequency. This study examined the acoustical differences in the first two syllables of stressed English words produced by ten American and Korean speakers. The Korean subjects scored very high on the TOEFL. They read at a normal speed a fable from which the acoustical parameters of eight words were analyzed. In order to make the data comparison meaningful, each parameter was collected at 100 dynamic time points proportional to the total duration of the two syllables. Then the ratio of the parameter sum of the first rime to that of the second rime was calculated to determine the relative prominence of the syllables. Results showed that the durations of the first two syllables were almost comparable between the Americans and Koreans. However, statistically significant differences showed up in the diphthong pronunciations and in the words with the second syllable stressed. Also, remarkably high r-squared values were found between pairs of the three acoustical parameters, which suggests that either one or a combination of two or more parameters may account for the prominence of a syllable within a word.

• Journal of The Korean Astronomical Society
• /
• v.23 no.1
• /
• pp.71-82
• /
• 1990

Theoretical calculations of the combined radiative transfer and statistical equilibrium equation including the charge-particle conservations have been earned out for a multilevel hydrogen atom in quiescent prominences. Cool and dense models show the steep changes of population and radiation field in the vicinity of the surface, while these physical quantities remain unchanged for models with temperature of 7,300K, regardless of total densities. Ionization rate of hydrogen atom related with metallic line formation varies in considerable amounts from the surface to the center of model prominences cooler than 6,300K. However, such cool models cannot release enough hydrogen line emissions to explain observed intensities. Prominence models with a temperature higher than 8,000K can yield the centrally reversed Lyman line profiles confirmed by satellite EUV observations. We find that queiscent prominence with a density between $2{\times}10^{11}$ and $10^{12}cm^{-3}$ should be in temperature range between 6,300K and 8,300K, in order to explain consistently observed H alpha, beta line emissions and $n_p/n_l$ ratio.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.12
• /
• pp.1172-1183
• /
• 2012

Aure's tonality was considered as the sound metrics for the expression of the tonality of gear whine sound in a previous research. It was failed to use the Aure's tonality as a sound metric for the tonal impression. Thus Aures's tonality, was developed for tonal impression in previous research. However, this metric did not express well the tonality of gear whine sound since the whine sound is a non-stationary signal with frequency modulation and amplitude modulation. In this study, the new method for the tonality evaluation for a non-stationary signal is presented. It is developed based on the prominence ratio, tonality impression function, and lower threshold level. It improves the accuracy and reliability of the sound quality index being used for the sound quality evaluation of the axle-gear whine sound.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.330-332
• /
• 2003

In this paper, It is introduced new sound quality method, FI(Fluctuation Index) and the example applied Outdoors side Air-conditioner noise evaluation. Because FI is applied with very simple algebraic calculation algorithm, it can be applied some other application without spending high time and cost.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.14-29
• /
• 2006

Developments in computer technology have made possible the 3-dimensional (3-D) evaluation of hard and soft tissues in orthodontic diagnosis, treatment planning and post-treatment results. In this study, Korean adults with normal occlusion (male 30, female 30) were scanned by a 3-D laser scanner, then 3-D facial images formed by the Rapidform 2004 program (Inus Technology Inc., Seoul, Korea.). Reference planes in the facial soft tissue 3-D images were established and a 3-D coordinate system (X axis-left/right, Y axis-superior/inferior, Z axis-anterior/posterior) was established by using the soft tissue nasion as the zero point. Twenty-nine measurement points were established on the 3-D image and 43 linear measurements, 8 angular measurements, 29 linear distance ratios were obtained. The results are as follows; there were significant differences between males and females in the nasofrontal angle $(male:\;142^{\circ},\;female:\;147^{\circ})$ and transverse nasal prominence $(male:\;112^{\circ},\;female:\;116^{\circ})$ (p<0.05). The transverse upper lip prominence was $107^{\circ}$ in males, $106^{\circ}$ in females and the transverse mandibular prominence was $76^{\circ}$ in both males and females. Li-Me' was 0.4 times the length of Go-Me'(mandibular body length) and the mouth height was also 0.4 times the width of the mouth width. The linear distance ratio from the coronal reference plane of FT, Zy, Pn, ULPm, Li, Me' was -1/-1/1/0.5/0.5/-0.6 respectively. The 3-D facial model of Korean adults with normal occlusion were be constructed using coordinate values and linear measurement values. These data may be used as a reference in 3-D diagnosis and treatment planning for malocclusion and dentofacial deformity patients and applied for 3-D analysis of facial soft tissue changes before and after orthodontic treatment and orthognathic surgery.