• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.167-172
• /
• 1997

The electron swarm parameters and Energy distribution function have been calculated for electrons motion through CH$_4$ pure gas under the action of uniform electric field for 0.1$\leq$E/N(Td)$\leq$300, at the 300( $^{\circ}$K), using MCS method and Boltzmann transport equation. And then the resulting values of electron drift velocity were compared to experimental data and adjustment made in assumed cross sections until good agreement was obtained. The electron drift velocity is very useful in the fields of study relating to the conductive and dielectric phenomena of gas medium. The electron energy distribution in gas discharge are generally nonmaxwellian , and must be calculated by a numerical solution of the Boltzmann equation which takes in the elastic and inelastic collisions. To analyze the physical phenomena and properties (or electron swarm motion in a gas under the influence of an electric field, the energy distribution function of electrons and the theoretical deriveration of the electron drift velocity are calculated by the Backward Prolongation with respect to the Boltzmann transport equation as a parameter of E/N(Td).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.73-77
• /
• 1971

The experiment was carried out to investigate post-irradiation storage effect which was related to temperature(i.e. at 2$^{\circ}C$, 17$^{\circ}C$ and 4$0^{\circ}C$) on wheat seeds; Weibull's Svenno, treated with gamma-ray and fast neutron. Results obtained showed that the seedling height in both radiation sources was decreased with prolongation of storage period, especially when the seeds were treated with high dosage and stored at high temperature(4$0^{\circ}C$). The results of this trial, however, showed that storage effect was influenced by irradiation dose, temperature and storage time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.503-503
• /
• 2007

본 논문에서는 지중배전(22.9kV) 선로에 사용되는 지상변압기를 대상으로 수행한 방열해석 및 개선과 변압기수명연장에 관한 검토 결과를 수록하였다. 변압기의 열화메커니즘에 대한 문헌 조사를 통해 변압기 온도와 수명간의 관계를 작도하였는바, 수명 평가를 위한 핵심 인자로 열에 의한 절연지의 열화에 초점을 맞추었다. 기존 외함에 설치된 방열구중 상부 위치를 상부판에도 변경하는 경우 약25%의 통풍량 증가 효과를 기대할 수 있을 것으로 평가 되었으며 상부판과 내함 사이에 형성되던 고온 영역에서의 온도를 약$15^{\circ}C$정도 낮출 수 있는 것으로 나타났다. 절연지의 인장강도 변화로 평가한 수명예측 곡선에 따르면 약$10^{\circ}C$의 은도 저감은 약10배의 수명 연장 효과를 가져오는 것으로 나타난바, 본 연구에서 확인한 방열구의 위치 변경에 따른 지상기기 내부의 온도 저하는 변압기 수명을 연장하는데 일조할 것으로 기대된다. 기존 지상변압기에서의 방열구조를 통해 변압기 온도와 수명간의 관계를 작도하였는바, 수명 평가를 위한 핵심인자로 효과적으로 방열할 수 있는 새로운 외함의 구조 및 디자인을 제시하고 시뮬레이션을 통해 개선효과를 예측하였다. 또한, 개선된 모델을 가지고 실제 변압기를 제작한 후 부하를 인가하여 개선전과 후에 대한 방열효과를 실증시험을 통해 확인하였다.

• The Journal of Pediatrics of Korean Medicine
• /
• v.22 no.1
• /
• pp.1-11
• /
• 2008

Objectives In order to investigate the anticonvulsive effects of Jisungbomuyngtan, the experiments were done in mice. Methods After solid extracts of Jisungbomuyngtan was orally administered to mice, four types of convulsion were induced in mice by ECT, strychnine, picrotoxin, caffein. Each of the time to convulsion and death was measured. Results 1. The solid extracts of Jisungbomuyngtan showed a remarkable effect in delaying the onset of convulsion induced by ECT 2. In case of convulsion induced by strychnine, the solid extracts of Jisungbomuyngtan revealed a slight, but not statistically significant effect. 3. Considerable prolongation of time to death was observed in convulsion induced by picrotoxin due to the anticonvulsive effect of Jisungbomuyngtan. 4. The anticonvulsive effect of Jisungbomuyngtan was not found in convulsion induced by caffein. Conclusions Jisungbomuyngtan effect remarkably in delaying the onset of convulsion induced by ECT. But slightly effect by strychnine. And Jisungbomuyngtan effect in prolonging time to death in convulsion induced by picrotoxin, but not found in convulsion induced by caffein.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.1
• /
• pp.7-12
• /
• 2006

Throughout the century, based on the precedent set by Flexner in the United States, almost every subsequent report on the reform of medical education has pointed out the need for more prevention-oriented teaching in the curriculum. This has been particularly so in countries like Korea where the basic public health services have been so important for the improvement of health of the people. And, in fact, preventive medicine and public health have contributed a great deal to the prevention of communicable diseases and prolongation of life expectancy. Recently, however, along with the educational reform that emphasizing the interdisciplinary teaching, integration of basic science and clinical education, and centralization of responsibility for the medical education curriculum, concerns are being voiced by preventive medicine educators. These concerns are primarily centered around the fear that the implementation of interdisciplinary, centrally administered courses would result in a weakening of content and teaching expertise as well as a loss of departmental power and control. This paper foresees that preventive medicine and public health will be more important in Korea in the future and proposes that preventive medicine educators will have to step forward and turn the challenges of curricula restructuring into opportunities to expand the role of preventive medicine in the curricula of their institutions.

• Advances in concrete construction
• /
• v.3 no.1
• /
• pp.71-90
• /
• 2015

In order to investigate the feasibility and advantage of tuff used as pozzolan in cement-based composite, the representative specimens of tuff were collected, and their chemical compositions, proportion of vitreous phase, mineral species, and rock structure were measured by chemical composition analysis, petrographic analysis, and XRD. Pozzolanic activity strength index of tuff was tested by the ratio of the compression strength of the tuff/cement mortar to that of a control cement mortar. Pozzolanic reaction degree, and the contents of CH and bond water in the tuff/cement paste were determined by selective hydrochloric acid dissolution, and DSC-TG, respectively. The tuffs were demonstrated to be qualified supplementary binding material in cement-based composite according to relevant standards. The tuffs possessed abundant $SiO_2+Al_2O_3$ on chemical composition and plentiful content of amorphous phase on rock texture. The pozzolanic reaction degrees of the tuffs in the tuff/cement pastes were gradually increased with prolongation of curing time. The consistency of CH consumption and pozzolanic reaction degree was revealed. Variation of the pozzolanic reaction degree was enhanced with the bond water content and relationship between them appeared to satisfy an approximating linear law. The fitting linear regression equation can be applied to mutual conversion between pozzolanic reaction degree and bond water content.

• Nuclear Engineering and Technology
• /
• v.40 no.4
• /
• pp.269-276
• /
• 2008

Operational license of WWER-440/213 units at Paks NPP, Hungary is limited to the design lifetime of 30 years. Prolongation by additional 20 years of the operational lifetime is feasible. Moreover, enhancement of the reactor thermal power by 8% will increase both the net power output and the competitiveness of the plant. Paks NPP is a pioneer considering the power up-rate and preparation of long-term operation of WWER-440/213 design. Systematic preparatory work for long-term operation of Paks NPP has been started in 2000. A regulatory framework and a comprehensive engineering practice have been developed. According to the authors view, creation of a gapless engineering system via consequent application of best practices, and feed-back of experiences together with proper consideration of WWER-440/V213 features are the decisive elements of ensuring the safety of long-term operation. That systematic engineering approach is in the focus of recent paper. Key elements of justification and measures for ensuring the safety of long-term operation of Paks NPP WWER-440/213 units are identified and discussed. These are the assessment of plant condition and review of adequacy of ageing management programmes, also the review, validation and reconstitution of time limited ageing analyses as core tasks of licence renewal.

• Archives of Pharmacal Research
• /
• v.26 no.8
• /
• pp.659-665
• /
• 2003

We have studied the effect of rhEGF on the buccal mucosal ulcer healing. rhEGF was rapidly degraded upon incubation with the hamster buccal mucosal homogenates; The degradation of rhEGF was significantly inhibited by sodium lauryl sulfate (SLS). Eudispert hv hydrogel and Polycarbophil 974P hydrogel were prepared for rhEGF delivery and their mucoadhesiveness was measured by the $Instron^R$ method. The mucoadhesive force of Eudispert hv was significantly greater than that of Polycarbophil 974P. Moreover, rhEGF in Eudispert hv hydrogel remained stable for about 2 months. To evaluate the ulcer healing effect of rhEGF, the buccal mucosal ulcer was induced in golden hamsters using acetic acid. At 24 h after administration of rhEGF/Eudispert hv hydrogel, the ulcerous area was decreased compared with rhEGF solution and, as a result, the curative ratio was $36.8\pm5.68$%. By the addition of SLS (0.5%) to Eudispert hv hydrogel, the curative ratio increased 1.5 times. The mechanism of the action was probably due to a combination of protection of the drug against proteases present in mucosa and prolongation of the release of rhEGF from the formulation at the site of action.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.298-308
• /
• 2019

This work deals with the membrane fouling mode and the unclogging in seawater ultrafiltration process. The identification of the fouling mechanism by modeling the experimental flux decline was performed using both the classical models of Hermia and the combined models of Bolton. The results show that Bolton models did not bring more precise information than the Hermia's and the flux decline can be described by one of the four Hermia's models since the backwash interval is ${\leq}60$ min. An experimental screening study has been then conducted to choose among 5 parameters (backwash interval, duration, pulses and the flow-rate or injected hypochlorite concentration) those that are the most influential on the fouling and the net water production. It has emerged that fouling is mainly affected by the backwash interval; its prolongation from 30 to 60 min engenders an increase in the reversible fouling and a decrease in the irreversible fouling. This later is also significantly reduced when the hypochlorite concentration increases from 4.5 to 10 ppm. Moreover, the net water production significantly increases with increasing the filtration duration up to 60 min and decreases with decreasing the backwash duration and backwash flow-rate from 10 to 40 s and from 15 to ${\geq}20L.min^{-1}$, respectively.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.23 no.2
• /
• pp.65-92
• /
• 2019

We survey a recently developed immersed finite element method (IFEM) for the interface problems. The IFEM uses structured grids such as uniform grids, even if the interface is a smooth curve. Instead of fitting the curved interface, the bases are modified so that they satisfy the jump conditions along the interface. The early versions of IFEM [1, 2] were suboptimal in convergence order [3]. Later, the consistency terms were added to the bilinear forms [4, 5], thus the scheme became optimal and the error estimates were proven. For elasticity problems with interfaces, we modify the Crouzeix-Raviart based element to satisfy the traction conditions along the interface [6], but the consistency terms are not needed. To satisfy the Korn's inequality, we add the stabilizing terms to the bilinear form. The optimal error estimate was shown for a triangular grid. Lastly, we describe the multigrid algorithms for the discretized system arising from IFEM. The prolongation operators are designed so that the prolongated function satisfy the flux continuity condition along the interface. The W-cycle convergence was proved, and the number of V-cycle is independent of the mesh size.