• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.65-72
• /
• 2002

Generally, there are laser operating equipments( aligner, stepper) and electronic microscope( SEM, TEM) as a high precision manufacturing and inspection equipment in semiconductor production companies, precision examination and measuring laboratories. Mostly, these equipments are characterized by projection and target part. The relative displacements between projection and target part are dominant roles in vibrational problem in these precision equipments. These relative displacements are determined by the position of incoming vibration and the difference of vibration response in projection and target part. In this study, the allowable vibrational limits are suggested and the vibrational reduction plans are proposed by measurement and analysis of vibration phenomenon in the Clean Room in PDP(plasma display panel) production building. The vibration performance is evaluated by comparison relative displacements between projection and target part before/after the vibration isolation plan.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.304-310
• /
• 2001

This paper describes the analysis of flow field using a projection finite element method. The projection scheme with a pressure correction is presented for the analysis of an incompressible Navier-Stokes flow. The projection scheme is analyzed numerically and applied to the well-known bench marking problems such as lid driven cavity. Finally, the projection scheme is applied to a flow through the automobiles front. In the automobiles cooling system, the flow through its front is very important to a cooling performance. The results show that the flow quantity increases by locating the position of bumper to the further front position of a car. And, the improvement on the suction part below a bumper achieves the more passing flow quantity. The attachment of an air dam increases passing flow quantity causing the pressure rise to the front part and the pressure drop beneath a car.

• 치과방사선
• /
• 제19권1호
• /
• pp.151-159
• /
• 1989

The author has studied radiographic bony cnages of mandibular condyle head in temporomandibular disorder patients using Oblique lateral transcranial projection, Orthopantomography, and Tomography. The bony change types and the frequencies of occurrence and the incidences of bony changes in three different radiographic techniques were examined. The coincidences of bony change types between the Oblique lateral transcranial projection and the lateral part of Tomogram, the Orthopantomogram and the medial part of Tomogram were also examined. The results were as follows: 1. The mean age of patients was 31.7 years and under 40 years were 24 patients, women werw 27 patients, men were 4patients. 2. The observable case of bony changes in all three radiographic techniques were 19 cases (50%) of 38 cases and the observable cases of bony changes in only Tomography were 5 cases(13.2%) 3. The most frequent radiographic bony change type was osteophyte and next orders were flattening, erosion, concavity. 4. The positional incidences of bony change in Tomogram were 31 cases in lateral part and 27 cases in central part. 5. The coincidence of bony change types between the Oblique lateral transcranial projection and the lateral part of Tomogram was 80%, and the coincidence between the Orthopantomogram and the medial part or Tomogram was 76.0%.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.85-91
• /
• 2009

A roll projection welding machine is introduced to fabricate metallic sandwich plate consisting of a structured inner sheet with projection-like shape and a pair of skin sheets. To fabricate the metallic sandwich plate of consistent and good quality, two process monitoring methods are introduced; dynamic resistance monitoring and skin sheet temperature monitoring. Dynamic resistance monitoring has no time delay but gives only averaged value over plate width. Skin sheet temperature monitoring has certain amount of time delay but is good for predicting weld quality of specified position. By the two complementary monitoring methods, the characteristics of the new welding process is successfully understood.

• 전기화학회지
• /
• 제12권4호
• /
• pp.317-323
• /
• 2009

돌출부를 지니고 있는 전극의 전기도금 공정에 대한 이론적 이차 전류분포에 대하여 고찰하였다. 전극이 모두 전도체인 경우(Case 1)와 돌출부위만 전도체인 경우(Case 2) 두 가지 경우에 대하여 인가전위, 이온교환 전류밀도와 용액의 비전도도의 비인 $\xi$값, aspect ratio의 영향 등에 대하여 살펴보았다. 그 결과 인가 전위와 $\xi$값이 증가할수록 전류분포는 불균등화가 심화됨을 알 수 있었다. Aspect ratio가 작아질수록 전류분포가 보다 균등화되며 Case 2의 경우가 Case 1의 경우 보다 균등도가 좋아짐을 알 수 있었다. 돌출부위가 다양한 모양으로 이루진 전극에 대해서도 이 모델을 적용한 결과 전극 표면에 따른 국부 전류분포를 동시에 계산할 수 있음을 알 수 있었고 이 경우에도 이전과 마찬가지로 $\xi$값이 감소할수록 전류분포의 균등도가 좋아짐을 알 수 있었다.

• Korean Journal of Mathematics
• /
• 제21권2호
• /
• pp.125-150
• /
• 2013

The stabilized Gauge-Uzawa method (SGUM), which is a second order projection type algorithm to solve the time-dependent Navier-Stokes equations, has been newly constructed in 2013 Pyo's paper. The accuracy of SGUM has been proved only for time discrete scheme in the same paper, but it is crucial to study for fully discrete scheme, because the numerical errors depend on discretizations for both space and time, and because discrete spaces between velocity and pressure can not be chosen arbitrary. In this paper, we find out properties of the fully discrete SGUM and estimate its errors and stability to solve the evolution Navier-Stokes equations. The main difficulty in this estimation arises from losing some cancellation laws due to failing divergence free condition of the discrete velocity function. This result will be extended to Boussinesq equations in the continuous research (part II) and is essential in the study of part II.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.385-391
• /
• 2013

X-ray computed tomography is a very powerful nondestructive technique in safety inspection of historic timber building. But, in field, various testing condition makes it difficult to carry out X-ray CT testing. Limited size in X-ray digital detector is one of the problems. In this study, a pitch pine disk with two holes was used to know how imperfection in X-ray projection affects CT image resolution. Using various number of projections, CT image was reconstructed by filtered back projection method, and then it was investigated how many projection is required to identify the holes in different location. Two artificial holes could be differently detected according to their location in cross section of specimen. One hole in center part of specimen was identified using more than 9 radiographs, but the other one which located in outer part of cross section could not be detected until more than 36 projections were used. Even though there is data missing in outer part of cross section due to limited size of detector, the center part of CT image could be reconstructed well and the resolution of outer part became higher with increase of the number of projections. For field application, the number of projections for CT image reconstruction needs to be decided with consideration of another nondestructive testing and the location of interest.

• 한국인구학
• /
• 제33권2호
• /
• pp.85-111
• /
• 2010

한국사회가 최근 초저출산율이 지속되고, 사망율이 괄목할 만큼 개선되면서 장래인구 추계는 새로운 도전을 받고 있다. 이 연구는 장래 인구를 보다 정확한 예측하고, 양질의 정보를 제공하기 위한 방안을 한국의 경우를 중심으로 여타 저출산 국가들과 비교연구를 통해 논의하였다. 구체적으로 이 연구는 1) 통계청이 실시한 2009년도 인구추계를 2006년도 공식 인구추계와 비교분석 하였고, 2) 한국의 인구추계방식을 다른 나라의 경우와 비교 분석하였다. 비교에는 어떤 기관이 인구추계를 담당하는지, 얼마나 먼 장래까지 추계 하는지, 얼마나 자주 행해지는지, 그리고 추계에 사용되는 출산, 사망, 이주에 관련된 가정과 시나리오의 수를 고려하였다. 3) 향후 50년간장래인구를 확률적 인구추계 방식을 도입하여 예측해 보았다. 4) 마지막으로 2011년 장래인구추계에 사용될 시나리오를 살펴보았다. 이러한 논의를 바탕으로 이 연구는, 장래인구추계의 정확성을 높이기 위해서 인구추계를 좀더 자주 실시할 것과, 단기와 장기추계의 구분, 시나리오 수를 기존 네 가지에서 더 늘릴 것을 제안하였다. 또한 기준인구 산정에 있어 국내 체류중인 외국인 인구를 고려할 것과 확률적 인구추계 방식도 도입할 것을 제안하였다.

• 대한수학회보
• /
• 제33권1호
• /
• pp.65-73
• /
• 1996

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.92-96
• /
• 2009

Metallic sandwich plate has many good properties such as high specific stiffness, high specific strength, good impact absorptivity, effective thermal insulation and soundproofing. In our study, a new bonding method, 3-layer roll projection welding, is introduced to fabricate the metallic sandwich plate. The new method uses a pair of roll electrodes like the seam welding, and projection welding is made at two internal interfaces of the 3-layer weldment consisting of a structured inner sheet and a pair of skin sheets. During the welding process, skin sheet temperature are measured to produce metallic sandwich plate with uniform and good quality. But it is difficult to observe or measure the temperature at the welding points during welding process because the welding points exist at the internal interfaces. Therefore FEM numerical analysis using ABAQUS is conducted to estimate the generated heat at the welding points with different welding conditions.