• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.913-920
• /
• 2000

The hall and the projection room of the multiplex cinema being constructed on the sixth and seventh floors at Jeonpo-dong market, Pusan, is composed of structural beams and decks considering the structures self weight problem, and the following problems are expected: - Vibration and noise generated on the floors by moving audiences may annoy the audiences in the other hall - Vibration and noise generate on the floor of the nearby hall as the audiences walk through the alley near the projection room - Vibration and noise generate on the floor of the hall nearby the projection room as the film drops This study measured and reviewed the vibration amount of the seven representative transferring routes that were selected for the halls and the alley near the projection room. Based on the analysis, the model hall was constructed and the vibration in the hall was estimated after cutting the deck. Also, this study constructed the steel stairs and investigated the vibration transferring characteristics to decide whether to construct the steel stairs in the building. Finally, the results were evaluated by actually using the stairs and reviewed the appropriateness of the measurement.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.1
• /
• pp.65-72
• /
• 2002

Generally, there are laser operating equipments( aligner, stepper) and electronic microscope( SEM, TEM) as a high precision manufacturing and inspection equipment in semiconductor production companies, precision examination and measuring laboratories. Mostly, these equipments are characterized by projection and target part. The relative displacements between projection and target part are dominant roles in vibrational problem in these precision equipments. These relative displacements are determined by the position of incoming vibration and the difference of vibration response in projection and target part. In this study, the allowable vibrational limits are suggested and the vibrational reduction plans are proposed by measurement and analysis of vibration phenomenon in the Clean Room in PDP(plasma display panel) production building. The vibration performance is evaluated by comparison relative displacements between projection and target part before/after the vibration isolation plan.

• Journal of the Korean housing association
• /
• v.18 no.1
• /
• pp.113-122
• /
• 2007

Houses in Jeju city are divided into separated types and combination types of household affairs space. Other special types are separated-kitchen type. Separated household affairs space type is mostly built. Separated household affairs space type were sitting room + Gopang separate type and separate sitting room type. Combination household affairs space type made from sitting room, kitchen, Gopang and Chabang(Dinning room) put together as space differentiation, also into classes sitting room + kitchen + Gopang + Chabang type, sitting room + kitchen + Chabang type, sitting room + kitchen + Gopang, sitting room + kitchen type by combination household cares space type. Separated-kitchen type was one of the special type from separated-kitchen type of traditional housing, and type with continuous. Houses in Jeju city were 3 kan type and 4 kan type. 4kan type was mostly built. ㅡ shape is kept as plan shaped of straight shape, and roof shape is showed as ㅡ shape gathering roof. ㅡ shape + part projection type talls part projecting type as happened in Gopang, and Chabang. Roof is gathering roof, and when it is showed ㄱ shape by Gopang, Chabang, and kitchen are projected. ㅡ shape + total projection shape is one of the room become totally projected by Gopang and Chabang, can be happen with small room or kitchen, and roof as gathering roof shaped with ㅡ shape, ㄱ shape, ㄷ shape, unsystematic ㄹ shape, and various shapes.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1E
• /
• pp.25-29
• /
• 2008

The projection approximation subspace tracking (PAST) is one of the attractive subspace tracking algorithms, because it estimatesthe signal subspace adaptively and continuously. Furthermore, the computational complexity is relatively low. However, the algorithm still has room for improvement in the subspace estimation accuracy. In this paper, we propose a new algorithm to improve the subspace estimation accuracy using a normally ordered input vector and a reversely ordered input vector simultaneously.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.514-519
• /
• 2009

The projection approximation subspace tracking (PAST) is one of the attractive subspace tracking algorithms, because it estimates the signal subspace adaptively and continuously. Furthermore, the computational complexity is relatively low. However, the algorithm still has room for improvement in the subspace estimation accuracy. FE-PAST (Forward-Backward PAST) is one of the results from the improvement studies. In this paper, we propose a new algorithm to improve the orthogonality of the FB-PAST (Forward-Backward PAST).

• Korean Journal of Digital Imaging in Medicine
• /
• v.3 no.1
• /
• pp.52-58
• /
• 1997

Before entering 21st Century, modern medical science is requiring more precise display which is highly estimated in diagnostic value as radial science technology is achieving sharp development. And it is also trying to contribute to improve national health and to offer better service by reducing radial exposure. General projection and Fluoroscopy which are most difficult to be displayed in digital tend to change their way ; from analog to digital with development of Electronic Engineering and Computer Technology, Introducing to CR system in 1994, SMC have displayed General projection and Fluoroscopy 100% in digital using CR system. This study searched differences between repeat rate, repeat type in the exam using Film/Screen and those in the exam using CR system. According to the analysis of repeat types and repeat rate of Film which was reused by using CR system in general projection room and Fluoroscopy room of SMC, we found that total 192,813 films were used and 2,097 films, 1.09% of total were reused. However, actual repeat covers 0.76% to 1,461 sheets with the exception of 636sheets. As above, display process using CR system is 0.76% much lower than general repeat rate 2$\sim$4% of Film/Screen exam. Besides decreased under/over exposure, it is appeared that position failure rate in repeat rate 0.76% covers relatively high 31%. Noticing that repeat caused unskilled devices handing was found many times, sufficient understanding seems to be required to reduce repeat.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.5
• /
• pp.212-219
• /
• 2002

In this paper, the epipolar geometry, genera17y used as a pin-hole camera model, is newly adapted to our proposed method that enables the affine reconstruction of the 3D object from two projected views. The proposed method models the projective projection of inherent X-ray imaging system, obviates the need to attach artifirially constructed material on the body, and requires none of the prior-knowledge regarding to intrinsic and extrinsic parameters of two X-ray imaging systems. The optimum numerical solution is obtained by applying the least mean square estimator to corresponding points on two projected X-ray planes. The performance of this proposed method is Quantitatively analyzed using computer synthesized model of Cochlear implantation electrodes. In simulated experiments, the propnsed method is insensitive to the added random noise, the scaling factor change, the center point change, and rotational angular change between two projection planes, as well as enables the stable 3D reconstruction in least square sense even in worst testing cases.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.42-46
• /
• 2002

In this paper, a new pre-processing algorithm is proposed to improve the performance of stereo acoustic echo canceller. The proposed algorithm has the improved performance by the estimation error reduction of filter coefficient using input signal which was reduced reverberation of room in the basis MINT (Mu1tip1e-input/output Inverse Theorem) filtering. For real stereo speech signal and real room impulse response the results of simulation, we showed that the proposed method could improved 3∼5 dB ERLE (Echo Return Loss Enhancement) regardless of NLMS (Normalized Least Mean Square) and Projection adaptive algorithm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.671-675
• /
• 2002

영화관의 구조설계에서 중요한 고려 인자 중에서 음향적 관점뿐만 아니라, 영사기의 진동으로 인한 영상의 떨림 현상은 관람석에서 미치는 구조물의 동적 특성 문제에 있다. 이는 영사기-스크린-관람객 사이의 3인자에 내한 상대진동허용변위에 의해 지배됨을 고려하여, 이를 만족시키는 변수 등에 따른 진동허용규재치를 결정하는 절차가 필요하다. 본 연구에서는 영화관의 진동허용규제치를 이들 3인자에 대한 변수들을 고려한 결정 과정을 공학적인 차원에서 정리하였으며, 복합상가 건물내의 영화관 영사실에 이를 만족하기 위한 진동 저감설계 자료에 활용하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2E
• /
• pp.3-9
• /
• 1998

Since the introduction of hands-free phone set and teleconferencing system, acoustic echo cancellation has been a challenge for engineers. Recently many researches have shown that the best solution for the acoustic echo compensation problem is represented by an adaptive filter which iteratively tries to identify the unknown impulse response of the system from loudspeaker to microphone. In this paper, we apply the delayless subband adaptive filters and fast affine projection algorithm for the identification of room impulse response. Simulation results show 3∼8 dB more enhanced performance than conventional fullband adaptive filters or subband adaptive filters. In addition, fast affine projection algorithm shows better convergence speed at the expense of the low computational complexity than conventional LMS algorithm.