• 한국초전도ㆍ저온공학회논문지
• /
• 제21권3호
• /
• pp.43-46
• /
• 2019

A rare-earth barium copper oxide (REBCO) superconducting magnet was designed using no-insulation (NI) and multi-width (MW) winding techniques. The proposed magnet is comprised of 58 REBCO-wound single pancake coils with a bore size of 240 mm. When the magnet is operated at 20 K, the center magnetic flux density is designed to reach 3 T with an operational current of 169.55 A, 70 % of its critical current. The critical current was evaluated using experimental data of a short REBCO conductor sample. The designed magnet was then simulated using FEM software with uniform current density model. Magnetic field and mechanical properties of the magnet are evaluated using the simulated data. This magnet was designed as one of the base designs for the project "Tesla-Level Magnets with Large Bore Sizes for Industrial Applications" which was initiated in 2019, and will be wound using REBCO wires with the defect-irrelevant-winding (DIW) technique incorporated to reduce the overall manufacturing cost.

• 한국BIM학회 논문집
• /
• 제10권3호
• /
• pp.33-42
• /
• 2020

Recently, in the smart construction field, it is possible to construct spatial information of 3D data base quickly and accurately using drones, LiDARs and ARs,. Most public ordering institutions are pushing for the efficiency of construction work through establishing and announcing road maps and guidelines for utilizing BIM for the entire life cycle of construction. However, in most policies, the impact of 3D data on the entire life cycle is limited by only partially constructing and utilizing 3D data or by being mentioned. In addition, many public institutions, construction companies and planning companies did not actively utilize survey information during the actual construction phase, despite the possibility of using 3D survey information. In order to confirm the utilization of survey information, a total of eight private construction companies were selected and interviewed by experts. The analysis shows that most of companies lack the performance of drone measurements or have a lack of awareness of advantages, and among them, construction companies are relatively active. Based on these opinions, this study examined the usability of surveying information and examined measures to expand the utilization of survey information in legal and institutional aspects, technology development aspects and industrial development.

• 4차산업연구
• /
• 제3권1호
• /
• pp.1-12
• /
• 2023

Purpose - In Korea, where 64% of the land is forested, mountaineering is a leisure activity enjoyed by the majority of the people. As new technologies named the 4th industrial revolution spread more after the Covid-19 pandemic, we propose a human and technology convergence curriculum for mountaineering and trekking education to enjoy safety in the field of mountaineering and trekking using cutting-edge technology. Research design, data, and methodology - After examining the current state of the mountaineering industry and preceding studies on mountaineering and camping, and learning about BAC the 100 famous mountains, mountaineering gamification, and Gamification We designed an AI convergence curriculum using. Result - Understanding the topography and characteristics of mountains in Korea, acquiring mountaineering information through AI convergence, selecting mountaineering equipment suitable for the season, terrain, and weather, setting educational goals to safely climb, and deriving term project results. A total of 15 A curricula for teaching was proposed. Conclusion - Artificial intelligence technology is applied to the field of mountaineering and trekking and used as a tool, and it is expected that the base of mountaineering will be expanded through safe, efficient, fun, and sustainable education. Through this study, it is expected that the AI convergence education curriculum for mountaineering and trekking will be developed and advanced through several studies.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.794-799
• /
• 2009

The temperature control of in-place concrete is the most important factor for an early age of curing concrete. Heat stress of mass concrete caused by the heat of hydration can induce the crack of concrete, and a frost damage from cold weather casting concrete results defect on compressive strength and degradation of durability. Therefore, success and failure of concrete work is dependant on the measurement and control of concrete temperature. In addition, the compressive strength assessment of in-place concrete obtained from the maturity calculated from the history of temperature make a reduction of construction cycle time, possible. For that purpose, wireless temperature measuring system was developed to control temperature and assess strength of concrete. And, it was possible to monitor the temperature of concrete over 1km apart from site office and to take a proper measure; mesh-type network was developed for wireless sensor. Furthermore, curing control system that contains the program capable to calculate the maturity of concrete from the history of temperature and to assess the compressive strength of concrete was established. In this study, organization and practical method of developed curing control system are presented; base on in-place application case.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1048-1052
• /
• 2005

In Korean cases, the occupation of building construction is below 10% of the total industry workers but from a accident rate point of view, it is a risk serious industry and it's hazard is very considerable which accident rate is up to 30% of the total industry workers. The reason of high accident rate of the building construction is its own characteristic, hazard of the work in which is implicated and the shortage of safety counter plan and information, so it is most required to the building construction that educating, training, short and long period approaching to prevent the hazard. The safety information of building construction which is related to safety accident is divided into human and material such as hazard, work situation, cause and counter plan. The existing hazard cases imply all of the information about the work type and work progress of the building construction, so if the research of the every fact is well accomplished, we can obtain the useful information and prevent the hazard of building construction. From this point of view, the emphasis of this study is based on analyzing the cause of hazard first, suggesting the safety information each part of work type and work progress second, and finally making the all existing hazard cases to the Data Base and developing the safety information system.

• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.375-382
• /
• 2023

The H-shaped steel beam is popular due to its ease of manufacturing and connection to the column. This profile, which is used as a shallow beam, needs the high weak-axis bending stiffness and torsional stiffness to meet the overall stability. Achieving the local beam flange stability, bearing capacity, bending stiffness, and torsional requirements need a great thickness and width of the beam flange, which causes, which will cause more uneconomical structural design. So, the box-section beam is the ideal alternative. However, the current design specifications do not have design rules for the bolt-and-welded connection of the box-section beam and box-section column. The paper proposes a novel bolt-and-welded connection of the box-section beams and box-section columns based on a high-rise structural design scheme. Three connection models, BASE, WBF, and RBS, are analyzed under cyclic loading in ABAQUS software. The failure modes, hysteresis response, bearing capacity, ductility, plastic rotation angle, energy dissipation, and stiffness degradation of all models are determined and compared. Compared with the other two models, the model WBF exhibited excellent seismic performance, ductility, and plastic rotation ability. Finally, model WBF was chosen as the connection scheme used in the project design.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.540-543
• /
• 2015

Solar energy is one of the most important alternative energy sources which have been shown to meet high levels of heating and cooling demands in buildings. However, the efficiencies to satisfy these demands using solar energy significantly vary based on the characteristics of individual building. Therefore, this paper is focused on developing the methodology which can help to design optimal solar system for heating and cooling to be in cooperated within the existing buildings according to their load profiles. This research has established the Solar Heating and Cooling (SHC) system which is composed of collectors, absorption chiller, boiler and heat storage tank. Each component of SHC system is analyzed and made by means of Modelica Language and Pistache tool is verified the results. Sequential approximate optimization (SAO) and meta-models determined to 15 design parameters to optimize SHC system. Finally, total coefficient of performance (COP) of the entire SHC system is improved approximately 7.3% points compared to total COP of the base model of the SHC system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.207-208
• /
• 2023

The procedure of predicting the construction cost and selecting the best alternative is performed based on comparative review of each building case. In the case of office building, it is required continuously until design is complete, since the owner requirements are various and likely to change during the design process compared to a standardized apartment. However, since the comparison work for each alternative in practice uses only the unit construction cost, there is no correlation between the alternative and the final result, and it is difficult to quantitatively determine the effect of the determined design factor on the total construction cost. It is needed that a means to support the generation of design alternatives using similar building cases during the design phase. This paper proposes a BIM-based data replacing process to support creating and comparison of design alternatives of internal finishing for office building. When design alternatives are created through the proposed process, it is possible to compare several similar cases with current project under equivalent design circumstance. Because only some finishing properties are replaced while maintaining the shape information such as the length, height, and base constraint of the object to be replaced.

• 대한공업교육학회지
• /
• 제40권2호
• /
• pp.155-174
• /
• 2015

본 연구의 목적은 중등단계 직업교육에서의 발명 지식재산 교육내용에 대한 교사의 교육요구도 우선 순위를 분석하여, 중등단계 직업교육에서의 발명 지식재산교육이 효과적으로 이루어 질 수 있는 토대가 되는 교원의 역량 개발을 위한 직무 연수 프로그램 개발에 기초 자료를 제공하는 것이다. 이를 위해서 담당 교사 인식에 기반한 중등단계 직업교육에서의 발명 지식재산 교육내용에 대한 교육요구도와 이러한 교육요구도의 우선 순위를 분석하여 제시하였다. 본 연구의 구체적인 결과를 제시하면 다음과 같다. 첫째, 중등단계 직업교육에서 발명 지식재산 교육내용에 대한 담당 교사의 교육 요구도 평균은 5.02로 나타났다. 교육요구도가 전체 평균보다 높은 교육내용 항목은 23개이고, 이들 항목과 항목별 평균은 F4(특허 청구 범위) 6.72, F5(명세서 수정 및 보충) 6.46, F2(특허 도면 작성) 6.39, F3(특허명세서와 요약서 작성) 6.31, A5(발명 기법과 활동) 6.27, E6(발명 디자인 프로젝트) 6.15, H3(발명품 사업화) 5.97, F1(특허 정보 및 출원) 5.90, E5(디자인 권리화) 5.78, E3(발명 디자인의 디자인 과정) 5.77, A4(발명과 문제 해결) 5.57, G2(특허 조사 및 분류) 5.47, C2(발명 문제 해결 사고 기법) 5.45, E4(발명 디자인 제품 제작) 5.45, B5(발명특허 프로젝트) 5.42, A2(창의성 개발) 5.26, C4(발명 문제 해결 프로젝트) 5.26, H4(발명품 마케팅) 5.26, H2(발명품 사업성 분석) 5.20, D4(발명과 경영) 5.16, C3(문제 해결 활동) 5.14, E2(발명 디자인의 발상과 표현) 5.11, B3(발명기법의 실제) 5.08 순으로 나타났다. 둘째, 중등단계 직업교육에서 발명 지식재산 교육내용에 대한 담당 교사의 교육 요구도 우선 순위는 1순위에 해당하는 교육내용 항목은 13개, 2순위는 10개, 3순위는 17개로 나타났다. 1순위에 해당하는 교육내용 항목은 A4(발명과 문제 해결), A5(발명 기법과 활동), B5(발명특허 프로젝트), C2(발명 문제 해결 사고 기법), C4(발명 문제 해결 프로젝트), E3(발명 디자인 과정), E4(발명 디자인 제품 제작), E5(디자인 권리화), E6(발명 디자인 프로젝트), F1(특허 정보 및 출원), F2(특허 도면 작성), F3(특허명세서와 요약서 작성), H3(발명품 사업화)이다. 2순위에 해당하는 교육내용 항목은 A2(창의성 개발), B3(발명기법의 실제), C3(문제 해결 활동), D4(발명과 경영), E2(발명 디자인의 발상과 표현), F4(특허 청구 범위), F5(명세서 수정 및 보충), G2(특허 조사 및 분류), H2(발명품 사업성 분석), H4(발명품 마케팅)이다. 3순위는 1, 2 순위를 제외한 교육내용이다.

• 지능정보연구
• /
• 제26권3호
• /
• pp.149-169
• /
• 2020

현 정부의 주요 국책사업 중 하나인 도시재생 뉴딜사업은 매년 100 곳씩, 5년간 500곳을대상으로 50조를 투자하여 낙후된 지역을 개발하는 것으로 언론과 지자체의 높은 이목이 집중되고 있다. 그러나, 현재 이 사업모델은 면적 규모에 따라 "우리동네 살리기, 주거정비지원형, 일반근린형, 중심시가지형, 경제기반형" 등 다섯 가지로 나뉘어 추진되어 그 지역 본래의 특성을 반영하지 못하고 있다. 국내 도시재생 성공 키워드는 "주민 참여", "지역특화" "부처협업", "민관협력"이다. 성공 키워드에 따르면 지자체에서 정부에게 도시재생 사업을 제안할 때 지역주민, 민간기업의 도움과 함께 도시의 특성을 정확히 이해하고 도시의 특성에 어울리는 방향으로 사업을 추진하는 것이 가장 중요하다는 것을 알 수 있다. 또한 도시재생 사업 후 발생하는 부작용 중 하나인 젠트리피케이션 문제를 고려하면 그 지역 특성에 맞는 도시재생 유형을 선정하여 추진하는 것이 중요하다. 이에 본 연구는 '도시재생 뉴딜 사업' 방법론의 한계점을 보완하기 위해, 기존 서울시가 지역 특성에 기반하여 추진하고 있는 "2025 서울시 도시재생 전략계획"의 도시재생 유형을 참고하여 도시재생 사업지에 맞는 도시재생 유형을 추천하는 시스템을 머신러닝 알고리즘을 활용하여 제안하고자 한다. 서울시 도시재생 유형은 "저이용저개발, 쇠퇴낙후, 노후주거, 역사문화자원 특화" 네 가지로 분류된다 (Shon and Park, 2017). 지역 특성을 파악하기 위해 총 4가지 도시재생 유형에 대해 사업이 진행된 22개의 지역에 대한 뉴스 미디어 10만여건의 텍스트 데이터를 수집하였다. 수집된 텍스트를 이용하여 도시재생 유형에 따른 지역별 주요 키워드를 도출하고 토픽모델링을 수행하여 유형별 차이가 있는 지 탐색해 보았다. 다음 단계로 주어진 텍스트를 기반으로 도시재생 유형을 추천하는 추천시스템 구축을 위해 텍스트 데이터를 벡터로 변환하여 머신러닝 분류모델을 개발하였고, 이를 검증한 결과 97% 정확도를 보였다. 따라서 본 연구에서 제안하는 추천 시스템은 도시재생 사업을 진행하는 과정에서 신규 사업지의 지역 특성에 기반한 도시재생 유형을 추천할 수 있을 것으로 기대된다.