• Journal of Urban Science
• /
• v.7 no.1
• /
• pp.29-38
• /
• 2018

The cadastral rehabilitation project, which has been implemented since 2012, is a project to re-examine the national land that is not in conformity with the cadastral map, There is a lot of trouble in securing financial resources for business execution. This study examines the utility of UAS(Unmanned Aerial System) image - based cadastral demarcation as an alternative to budget reduction in the current state of cadastral rehabilitation, reasonable boundary adjustment, UAV(Unmanned Aerial Vehicles) is used to create 3D models and orthoimages of business districts, and to check accuracy by superimposing and comparing with digital maps of NGII(National Geographic Information Institute). As a result of the study, the accuracy of the 3D model and the orthoimage through the SfM(Structure-from-Motion) - based image interpretation of the digital map of the NGII were derived. In particular, we confirmed the similarity of UAS-based orthoimage with the cadastral boundaries affirmation, It is anticipated that the cost saving effect of current survey and boundary survey can be expected. In addition, it is easy to prepare a report to reduce civil complaints, which is a problematic element of the adjustment.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.40.2-40.2
• /
• 2007

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.321-332
• /
• 2013

Costs and expenses are intertwined and incurred throughout an entire construction project, even from the pre-construction phase, and each phase has a different impact on the life cycle cost (LCC). However, the cost breakdown structure (CBS) is different in each phase of a building construction project, which makes it hard to reasonably calculate construction cost. For this reason, the boundary conditions were analyzed in this study based on the life cycle cost break structure (LCCBS). In addition, breakdown factors were analyzed based on the boundary conditions to derive a linkage method. The validity of the linkage method was verified through application to actual construction projects. Through the analysis, it was found that the problem of items being left out was reduced by more than 97.2 percent, and the work was done an average of 6 hours faster compared to the conventional method. It is expected that by applying the new LCC system, LCC will be both reduced and calculated in a more efficient manner.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.764-767
• /
• 2006

It can be important framework data to monitor the change of land-use pattern of river boundary in design and management of river. This study analyzed the change of land-use pattern of Gab- and Yudeung River using time-series aerial images. To do this, we carried out radiation and geometric correction of image, and estimated land-use changes in inland and floodplain. As the analysis of inland, the ratio of residential, commercial, industrial, educational and public area, that is urbanized element, increases, but that of agricultural area shows a decline on the basis of 1990. Also, Minimum Distance Method, which is a kind of supervised classification method, is applied to extract water-body and sand bar layer in floodplain. As the analysis of land-use, the ratio of level-upped riverside land and water-body increases, but that of sand bar decreases. These time-series land use information can be important decision making data to evaluate the urbanization of river boundary, and especially it gives us goodness in river development project such as the composition of ecological habitat.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.21-23
• /
• 2012

The process of building project for planning, designing, construction, maintenance, and waste disposal are related with each other. However, we have a difficulty for estimating building's LCC due not to be flexible each other. Therefore, we analyzed the boundary condition between the process of construction and maintenance, and analyzed the factor of segment. We also suggested the Link System for flexible relation.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.3-10
• /
• 1999

Recently, It is proceeding the project of offshore structures in the many contury. A hybrid boundary-integral method is developed for computing wave forces on floating bodies. In this method, using the cylindric boundary for deviding elements, it is convenient to analysis but is difficult to apply to the rectangular or slender bodies. Thus, in this paper, I propose the new method by using the fictitious vertical cylinder of arbitary cross-section and shows results of the numerical analysis for testing.

• Journal of Korean Society of Rural Planning
• /
• v.4 no.1
• /
• pp.15-21
• /
• 1998

The purpose of the study is to identify a basic spatial unit for rural village redevelopment plan. An ideal spatial unit need to satisfy three basic premises: to be homogeneous as rural community, to be appropriate to implement the project, and to be compatible with regional planning systems. A spatial unit could, empirically, be defined based on the homogeneity at first, and then appropriateness and compatibility could be used to adjust its boundary. Mitan-Myun(13 villages), Pyungchang County, Dochuck-Myun(15 villages), Kwangju County, and Chuksan-Myun(28 villages), Kimje City in Korea were selected as case study areas. The degree of interrelationship between all possible pairs in each Myun was measured using spatial, socio-cultural, and economic indicators. Multidimensional Scaling(MDS) was used to identify a homogeneous spatial unit, and then indicators representing appropriateness and compatibility were used to adjust the identified boundary. New districts which have two or three villages were suggested as a reasonable spatial unit for rural village redevelopment, and its boundary roughly overlaps with Bup-Jeong-Ri(法定里: a legally defined village).

• Wind and Structures
• /
• v.4 no.4
• /
• pp.299-314
• /
• 2001

A study of wind effects was carried out at the Boundary Layer Wind Tunnel Laboratory (BLWTL) for the projected 558-m high free-standing telecommunication and observation tower for Jakarta, Indonesia. The objectives were to assist the designers with various aspects of wind action, including the overall structural loads and responses of the Tower shaft and the antenna superstructure, the local wind pressures on components of the exterior envelope, and winds in pedestrian areas. The designers of the Tower are the East China Architectural Design Institute (ECADI) and PT Menara Jakarta, Indonesia. Unfortunately, the project is halted due to the financial uncertainties in Indonesia. At the time of the stoppage, pile driving had been completed and slip forming of the concrete shaft of the Tower had begun. When completed, the Tower will exceed the height of the CN-Tower in Toronto, Canada by some 5 m.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.259-267
• /
• 2023

At a time when the demand for drones is increasing, a plan to utilize drone images was sought for efficient promotion of cadastral resurvey. To achieve the purpose of this study, the technical and legal status of drone images was reviewed, and through this, the possibility of using it for cadastral resurvey was primarily reviewed. subsequently, an experiment was conducted targeting the project district to examine whether drone images were applied to boundary extraction, which is the primary process of cadastral resurvey. As a result of the experiment, it was found that boundary extraction from images is possible. However, in some cases, it is impossible due to field conditions or image quality. Therefore, it is necessary first to apply cases where boundary extraction is possible to cadastral resurvey and seek solutions for some impossible cases. In particular, the image quality problem may have problems with the current technology, but it will also have problems with the existing drone equipment. So, standard for drone calibration should also be established. Finally, the cadastral resurvey surveying procedure using drones was also presented

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.439-454
• /
• 2013

UN-REDD (United Nations programme on Reducing Emissions from Deforestation and forest Degradation) is currently being emerged as one of important mechanism to reduce carbon dioxide in relation to the deforestation. Although administrative boundary has already gained world-wide recognition as a typical method of monitoring unit in the process of GHG (Greenhouse Gas) reduction project, this approach did not provide a realistic evidence in the carbon sequestering monitoring in terms of UN-REDD; the meaningful comparison of land use patterns among watershed boundaries, interpretation for distribution trends of carbon density, calculation of opportunity cost, leakage management, etc. This research proposes a comparative evaluation framework in a more objective and quantitative way for carbon sequestering monitoring between administrative and watershed boundary approaches. Mt. Geumgang of North Korea was selected as a survey objective and an exhaustive and realistic comparison of carbon sequestration between the two approaches was conducted, based on change detection using TM satellite images. It was possible for drainage boundary approach to identify more detailed area-wide patterns of carbon distribution than traditional administrative one, such as estimations of state and trends, including historical trends, of land use / land cover and carbon density in the Mt. Geumgang. The distinctive changing trends in terms of carbon sequestration were specifically identified over the watershed boundary from 4.0% to 34.8% while less than 1% difference was observed in the administrative boundaries, which were resulting in almost 21-22%. It is anticipated that this research output could be used as a valuable reference to support more scientific and objective decision-making in introducing watershed boundary as carbon sequestering monitoring unit.