• 한국정보시스템학회지:정보시스템연구
• /
• 제10권1호
• /
• pp.27-50
• /
• 2001

The purpose of this study was to examine some of the most important factors for the development of information systems with today's fast-paced, ever-changing, and exciting information system environment. Especially, it was focused to investigate current information technology related to develop information systems, to find some important problems during the development process, and to suggest solutions for the problems. Case research methodology was used because a natural setting was needed and a focus was on contemporary events for this study. Similarly, research phenomena was not supported by a strong theoretical base. The case was the development of an integrated information systems in a specific university. Multiple-case designs were desirable, but single-case study was used because of limitations of site selection. Multiple data collection methods were employed in this study such as documentation, interviews, and direct observation. Some major problems were found during the system development. First, the schedule to complete a project was delayed over six months. Second, the system did not ensure to align organizational goals and information systems goals based on BPR (Business Process Reengineering). Third, there was a difficulty in evaluating request for proposal (RPR) returns and choosing a vendor. Finally, information technology is changing too fast. So, it was very difficult to get the transparency of new technology The study has suggested a few solutions: top management support, matching If planning with business planning, complete project plan and control, user participation, and training Finally, joint application development (JAD) is strongly recommended, which is a workshop that unites management, IT specialists, and knowledge workers to define and specify the logical requirements and technical alternatives for a proposed system.

• 한국환경복원기술학회지
• /
• 제10권2호
• /
• pp.97-104
• /
• 2007

A/R CDM(Afforestation/Reforestation Clean Development Mechanism) in Kyoto Mechanism means, either afforestation in the area used for other purposes more than 50 years or reforestation in the area used for other purposes on December 31st in 1989. South Korea has few sites due to the successful forestation in the past, but North Korea has not reforested the deforested lands since the mid-1970's. So these areas need to apply A/R CDM Project for restoration. The purposes of this study are to make a time series analysis in deforested areas and to estimate a feasibility of A/R CDM. To find the site satisfying A/R CDM business definition, land cover classification was applied using satellite images of the mid-1970's with good forestation, late 1980's including A/R CDM base year, and recent 2000's, and the chronological change was analyzed to categorize the possible sites. The North Korean topographical map of 1977 was used to verify land cover classification degree of 1970's, the land cover classification results made by the Ministry of Environment in 2000 were compared to verify the accuracy of 1980's results, and the land cover classification results in 2000's were verified by 2 site visits. The results of this study can be summarized as follows. The eligible A/R CDM sites are 605,156ha on the basis of the forestation change analysis in North Korea. Since the mid-1970's, 30.8% of the decreased forestation area of 1,966,306ha was classified into A/R CDM eligible sites. While other countries have the limited eligible sites, which has not been used for forestation since 1989 or which is being scattered, North Korea has large scale sites. Deforested sites are mainly around road and residential area, consequently give better accessibility for forestation than other countries. In conclusion, it is found that North Korea can provide efficient site for applying A/R COM Project to forestation restoring deforested land because of easy accessibility and existence of many possible sites due to artificial deforestation. Also, it is meaningful that the study suggests the application possibility of A/R COM Project to restore deforested land in North Korea and the related basic information through the chronological classification of the mid-1970's with good forestation, the late-1980's including A/R COM base year, and recent 2000's. It is expected that the study contributes to revitalization of A/R CDM Project and related research on North Korea forestation.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.63-70
• /
• 2008

Management process of apartment buildings construction has increased because the after service of construction company meet the needs of customers. Many defect data, which was inspected by construction company or customers before moving into a new apartment house, were classified by field engineers and then communicated to corresponding subcontractors. The classification process needs to be performed by an expert engineer because there is so much data, it is unfeasible to complete in a short period of time. For this classification process, an automatic classification system using case base reasoning (CBR) should be considered. This research proposed a defect management system with automatic classification system using CBR. This constructed defect management system consists of cyber after service system for tenants and the whole defect management process of construction, preservation and management of apartment buildings. This system could improve the efficiency of expert work in terms of time and accuracy, as well as helping laymen users to conduct defect classification work as experts do.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.34-37
• /
• 2003

This paper proposes a BPM(Business Process Management) system framework for the NPD(New Product Development) of automotive suppliers. Recently many enterprises change their organization from function-oriented to process-oriented through BPR (Business Process Reengineering). Especially, based on quality systems like QS9000, it is required to documented business processes and continuously improve these processes for customer satisfaction. NPD, the most significant function for industrial competition, is reinforced by the best practices business process to satisfy the requirements of quality systems. The main objective of the paper is the development of the information system that supports the best practices process management. For this, first, we define the requirements of BPM system for NPD based on the viewpoint analysis, and then propose a DES (Design Execution System) framework based on dynamic workflow engine. The DES is addressed in the characteristics of a NPD business process, integrated project management, and process execution. A prototype DES system has been developed in the web environment. Its validity is demonstrated by applying it to an automotive supplier.

• 한국지리정보학회지
• /
• 제6권4호
• /
• pp.109-121
• /
• 2003

본 연구는 현재 각 기초 지자체 단위로 시행하고 있는 도로명 및 건물번호 부여사업의 현장조사 및 기본도 검수를 위하여 고해상도의 위성영상을 활용하는 것을 그 내용으로 한다. 대부분의 지방자치단체는 기존의 축척 1/1,000과 1/5,000 수치지도로 제작된 기본도에만 의존하여 현장조사를 진행하여 왔으며, 이 과정에서 현장조사자의 사전지식 부족 및 기본도의 현시성 결여 등으로 인하여 사업초기 상당한 시행착오를 겪는다. 따라서 본 연구는 도로명 및 건물번호 부여 사업에서 기존의 국립지리원 수치지도에 근거한 기본도를 보완하기 위한 방안으로 고해상도 위성영상의 활용가능성을 제시한다. 그 동안의 위성영상은 낮은 해상도로 인하여 상대적으로 면적이 좁고 토지 이용이 조밀한 우리나라의 실정에 적합하지 못하였으나, 1m 내외의 공간해상도를 지니는 고해상도 위성영상이 상용화되면서 우리나라에서도 점차 그 활용 분야가 넓어지고 있다. 또한 기존의 vector 기반의 수치지도와의 상호 보완을 위한 연계 활용도 점차 증가하고 있다. 연구 결과, 도로명 및 건물번호 부여사업에서 고해상도 위성영상의 활용은 그 결과적인 측면뿐만 아니라 비용적인 측면에서도 타당성이 있는 것으로 나타났으며, 본 사업을 통하여 구축된 위성영상 자료는 도시계획 등 타 분야에서도 활용이 가능하여 지방자치단체의 기초 공간자료로서도 활용도가 높다.

• 한국산림과학회지
• /
• 제101권2호
• /
• pp.175-184
• /
• 2012

본 연구는 산지계류의 자연친화적 복원을 위해 산지 계류 특성에 적합한 안정성과 구조를 가지면서 계안 보호 및 복원이 가능하도록 식생기반재 돌망태 공법을 개발하고, 개발 공법의 치수안정성, 생태계 구조 및 기능, 경관에 대한 모니터링을 통해 공법의 효능을 평가하는데 그 목적이 있다. 본 보에서는 개발된 계안 복원을 위한 식생기반재 돌망태 공법 중 매트리스형 식생기반재 돌망태 공법의 계안 피복효과를 정리, 보고하였다. 사용된 매트리스형 식생기반재 돌망태의 표준형태는 $4.0m{\times}2.0m{\times}0.3m$ 크기이며, 식생기반재는 고운 흙, 유기질 비료, 유기질 토양개량재, 종자를 혼합한 것으로, 식물성 천연섬유를 공급할 수 있고 다량의 수분 보유능력을 가진 피트모스를 유기질 토양개량재로서 사용하였다. 2006년 12월 식생기반재 돌망태를 이용한 계안 복원공법 시험지가 완공된 이후, 2007년 3월부터 각 시험구간별 식생발아 및 피복도 변화에 대한 모니터링을 실시한 결과, 최초 식생 발아는 2007년 4월 12일 경이었으며, 이후 약 50일이 경과한 2007년 5월 29일 경에 모든 시험구간에서 피복도 100%에 도달하였다. 또한 큰 채움돌과 유기질 토양만을 혼합한 시험구에서 가장 높은 식생피복도를 유지하였다. 피트모스를 많이 처리한 시험구가 높은 초기 식생피복도를 보임으로서 피트모스 처리가 양호한 발아 및 생육 환경 조성에 효과적인 것으로 분석되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.653-657
• /
• 2000

The paper describes the contents and results of the national project named "Development of Computer Integrated Product Design for Automation Equipment". It is focussed on the real-time control '||'&'||' monitoring of manufacturing process for automobile rubber parts. Automobile rubber parts industy is one of the typical process that high11 depends upon manufacturing facilities and equipments. So. it requires high cost and engineering technolog) on plant implementation. But most companies of rubber parts industries are small or mid companies that habe weak abilities for plant implementation properly and systematically. Therefore, for upgrading the levelof automation. it is necessar). to dekelope the computer based management and monitoring slsteni that enables to build-up the common base of automation and systemization. 'Through this project. we developed low cost real-time monitoring system for banbun mixing process '||'&'||' mold injection process of rubbcr parts manufacturing, that is composed with DDCU(Distributed Digital Control Unit),signal interfaces to gathering mon~toring terms and speciall\ developed functional sofhare including some algorithm for management '||'&'||' process monitoring

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.540-543
• /
• 2015

Solar energy is one of the most important alternative energy sources which have been shown to meet high levels of heating and cooling demands in buildings. However, the efficiencies to satisfy these demands using solar energy significantly vary based on the characteristics of individual building. Therefore, this paper is focused on developing the methodology which can help to design optimal solar system for heating and cooling to be in cooperated within the existing buildings according to their load profiles. This research has established the Solar Heating and Cooling (SHC) system which is composed of collectors, absorption chiller, boiler and heat storage tank. Each component of SHC system is analyzed and made by means of Modelica Language and Pistache tool is verified the results. Sequential approximate optimization (SAO) and meta-models determined to 15 design parameters to optimize SHC system. Finally, total coefficient of performance (COP) of the entire SHC system is improved approximately 7.3% points compared to total COP of the base model of the SHC system.

• 소프트웨어공학소사이어티 논문지
• /
• 제29권2호
• /
• pp.7-12
• /
• 2020

국내 공공기관에서 사업비가 5억원 이상인정보시스템 구축사업은 정보시스템 감리대상이고 정보시스템 감리원은 감리기준에 따라 감리를 실시하여야 한다. 최근 금융산업을 넘어 제조, 헬스케어, 유통, 공공 부문 등 다양한 분야에 블록체인 기술이 적용되면서 블록체인 기술을 적용한 시스템 개발이 늘고 있다. 공공기관과 기업에서는 블록체인 기술을 적용하기 위해 프라이빗 블록체인인 하이퍼레저 패브릭을 사용이 증가 추세에 있다. 그러나, 새롭게 부상하고 있는 블록체인기반 시스템을 기존의 감리점검항목으로 감리를 수행하기에는 충분하지 않아 각 감리원들이 검증되지 않은 점검항목을 개별적으로 만들어 사용하고 있다. 따라서 블록체인을 적용한 시스템을 감리할때 검증된 감리점검 항목이 필요하다. 본 연구에서는 델파이 프로세스를 커스터마이징하여 블록체인 기술을 활용한 시스템 개발사업에 적합한 점검항목을 도출하고, 정보시스템 감리원의 설문조사를 통해 도출된 점검항목의 적정성을 검증받았다. 이번 연구는 정보시스템 감리원의 감리 수행에 직접적인 도움이 될 것이며, 블록체인 기반 시스템을 통해 서비스를 제공하는 사업자와 주관사도 시스템의 품질 향상에 기여할 것으로 기대된다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.489-494
• /
• 2001

건설정보가운데 실제 수행된 프로젝트에서 발생하는 실적자료들은 후속 프로젝트의 기획 및 수행과정에서 활용함으로서 프로젝트 수행 및 의사결정과정에 시간적, 경제적 이익을 가져올 수 있다. 그러나 이러한 실적자료들에 대한 관리가 대부분 프로젝트의 준공과 함께 종료되어 정보화되지 못하고 방치 또는 폐기됨에 따라 정보자원의 손실과 이로 인한 중복투자의 문제점을 초래하고 있다. 본 연구에서는 웹(Web)기반의 공동주택의 공사실적자료 시스템을 구축하여 무의미하게 사장되고 있는 공사실적자료의 활용을 극대화시켜 침체일로에 있는 건설시장의 투명화와 건설정보화의 기반을 마련하고자 한다.