• Journal of Hospice and Palliative Care
• /
• v.12 no.3
• /
• pp.132-138
• /
• 2009

Proper education of hospice professionals is essential for ensuring quality of end-of-life care. In 2005, 'End-of-life Care Task Force Team' by Ministry of Health and Welfare established '60 hours of hospice education' as basic requirement for hospice professionals. This study is aimed to determine how many of the hospice professionals meet with the criteria and whether there are significant regional variations. Methods: We analyzed the data from 46 hospice organizations, which submitted the application to the 2008 designation program of Ministry of Health, Welfare, and Family Affairs. Data included details of the educational records of each hospice professionals. Results: Total 673 hospice professionals were included in the analysis. Overall, only 41.5% (279/673) met the requirement. Nurses (46.8%; 177/378) were more likely to meet the requirement than doctors (35.8%; 38/106), social workers (32.0%; 24/75) and clergies (35.1%; 40/114). Hospice professionals of the organizations in metropolitan area received more education than those in small cities or rural area (52.4% vs. 25.0% for doctors, 50.6% vs. 43.9% for nurses, 42.9% vs. 25.5% for social workers). By geographic areas, hospice professionals in southeast regions received less education than other part of Korea (28.1% vs. 43.0${\sim}$48.8%, respectively). Conclusion: Less than half of the Korean hospice professionals has received proper amount of hospice education, and significant regional variations existed. National programs to promote the education of hospice professionals and eliminate its disparities are greatly warranted. Implementation of the 60-hour currirulum for hospice professionals, based on the train-the-trainer model, would be regarded as one potential solution.

• Korean Journal of Clinical Laboratory Science
• /
• v.39 no.2
• /
• pp.113-121
• /
• 2007

Hearing loss is a common congenital disorder that is frequently associated with mutations in the Cx26 gene (GJB2). Recently, the mutation analysis of GJB2 has been used in a newborn screening test for the detection of hearing impairment. Population-based studies should be performed before the application of genetic testing for the identification of deaf newborns. In this study, 8 positions of GJB2 mutations-including 35delG, 167delT, 235delC, V27I, V37I, M34T, E114G, and I203T-were analyzed using PCR-direct sequencing in a total of 437 healthy Korean neonates. DNAs from dried blood spots were extracted using a commercial DNA extraction kit. The PCR-amplified products (783 bps) of the GJB2 gene were detected using 2% agarose gel electrophoresis and subjected to direct sequencing. The sequences were compared with those in the GenBank database by using the BLAST program. In this study, 5 GJB2 mutations -including V27I (79G>A), V37I (109G>A), E114G (341A>G), I203T (608T>C), and 235delC- were found. Of the 437 neonate samples, 301 subjects showed GJB2 mutations (68.9%, 301/437). The V27I mutation was found in 271 subjects and was the most frequent (62.0%, 271/437). The E114G, I203T and V37I mutations were shown in 146, 17 and 14 subjects, respectively. The 235delC mutation was found in 1 subject. The E114G mutation was frequently accompanied by the V27I mutation. V27I/E114G (97.2%, 143/147) was the most common double mutation and 3 subjects had the double mutation V27I/I203T. A triple mutation, V27I/E114G/I203T, was found in 1 subject. In conclusion, PCR-direct sequencing is a convenient tool for the rapid detection of GJB2 mutations and this data might provide information for the genetic counseling of the GJB2 gene.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.3
• /
• pp.142-161
• /
• 2013

In order to enhance scientific interest and a sense of affinity about ocean, the programs of the oceanic camp 'oceanic summer school' were developed and applied to $4^{th}$ and $9^{th}$-grade elementary and middle school students for 9 years from 2004 to 2012. It was composed of oceanic training for snorkeling, a tour to oceanic institutes and museums near the camp academy place, experimental learning in oceanic-related field, field trips for ocean and earth sciences, and lectures on various subjects of ocean. We developed and implemented 9-kinds of inquiry surveys to evaluate changes in cognitive and affective characteristics, and ocean literacy of students participated at the present oceanic summer camp. Based on the statistical analysis, affective characteristics such as interest, inquisitiveness, passion, and so on, were enhanced. Analysis of ocean literacy revealed that cognitive characteristics of the students were increased by 40%. We presented parents' responses on the programs of oceanic summer school. Some students with less initial interest of ocean have positively changed to make up their minds to be a oceanographer in several years later. In light of this, the summer school can be evaluated to be successfully functioned as a long-term support system for potentially young-talented students in the field of ocean science. This study addresses that long-term implementation of the summer oceanic camp may trigger students with potential talent toward in-depth science in the near future even though it could not bring positive effect immediately. This addresses the necessity of policy supports in order that various programs like the scientific camp should be more constructively developed and executed for next-generation manpower in oceanographic fields.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.397-408
• /
• 2011

Objectives: This study investigated changes in gene expressions concerning of differentiation, proliferation, mineralization and inflammation using Human-8 expression bead arrays when white Mineral Trioxide Aggregate and calcium hydroxide-containing cement were applied in vitro to human dental pulp cells (HDPCs). Materials and Methods: wMTA (white ProRoot MTA, Dentsply) and Dycal (Dentsply Caulk) in a Teflon tube (inner diameter 10 mm, height 1 mm) were applied to HDPCs. Empty tube-applied HDPCs were used as negative control. Total RNA was extracted at 3, 6, 9 and 24 hr after wMTA and Dycal application. The results of microarray were confirmed by reverse transcriptase polymerase chain reaction. Results: Out of the 24,546 genes, 43 genes (e.g., BMP2, FOSB, THBS1, EDN1, IL11, COL10A1, TUFT1, HMOX1) were up-regulated greater than two-fold and 25 genes (e.g., SMAD6, TIMP2, DCN, SOCS2, CEBPD, KIAA1199) were down-regulated below 50% by wMTA. Two hundred thirty nine genes (e.g., BMP2, BMP6, SMAD6, IL11, FOS, VEGFA, PlGF, HMOX1, SOCS2, CEBPD, KIAA1199) were up-regulated greater than two-fold and 358 genes (e.g., EDN1, FGF) were down-regulated below 50% by Dycal. Conclusions: Both wMTA and Dycal induced changes in gene expressions related with differentiation and proliferation of pulp cells. wMTA induced changes in gene expressions related with mineralization, and Dycal induced those related with angiogenesis. The genes related with inflammation were more expressed by Dycal than by wMTA. It was confirmed that both wMTA and Dycal were able to induce gene expression changes concerned with the pulp repair in different ways.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.47-59
• /
• 2017

Korean Economy has been developed by the Korean Government's Support for the Large-sized Firms. This Government Policy causes the Polarization between Large-sized and Micro-sized Firms Aggravated. Micro-sized Firms are distributed over the Whole Industry Area, and can also cause the Economic Crisis If They are crashed down. Therefore Government Policy for the Micro-sized Manufacturing Industry is very Important Issue. This Paper Focused on the Analysis of Current Status for the Shoes Micro Manufacturing Industry. For the Effective Analysis, This Paper uses the Statistical Data Open to the Public and also conducts the Survey for the Micro-sized Firms in Busan. Statistical Program is used for Analyzing the Collected Data and the Major Findings are as Follows. First, Shoes Industry is led by the Micro and Small & Medium sized Firms rather than the Large-sized. And the Micro-sized Firms are getting the High Rate among the Whole Shoes Industry. Busan is heavily populated Area as the Origin of Shoes Industry. Second, even though Most of the Owner of the Micro-sized Firms have the High Technology Skill Level, Worker's Aging Phenomenon gets Worse and causes the Technology Handing down to the Next Generation Difficult. Third, Because the Factory Facility of the Micro-sized Firms is Dirt and Unstable, the Modernized Manufacturing Infrastructure such as the Apartment Factory Facility is Necessary. Forth, as the Micro-sized Firms which have the Intangible Asset such as Patent is Few, the Government Policy for Encouraging the Patent Application is strongly Needed. Fifth, Entrepreneurship and Collaboration Mind between Micro-sized Firms are Lacked, so Establishment of the Cooperative Union is required. Finally, the Effort for the Systemic Planning for the Management is lacked, and the Introduction of the Management Innovation is strongly needed. The Limitation and Future Research Direction is also discussed.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.191-203
• /
• 2005

It was to study a following research of "A Kinematical Traits Analysis when Performing Uchimata(inner thigh reaping throw) by Posture and Voluntary Resistance Levels(VRL) of Uke in Judo[1]" and. "A Case Study of Center of Gravity(COG) when Performing Uchimata(inner thigh reaping throw) by Posture and Voluntary Resistance Levels(VRL) of Uke in Judo[II]". The purpose of this study was to analyze an angular momentum of trunk and lower extremity when performing uchimata by two postures and voluntary resistance levels(VRL) of uke(reciver) in Judo. The subjects, who were one male judoka(YH) for 1992 Barcelona Olympic Games Olympian(silver medalist), was filmed on two S-VHS 16mm video cameras(60fields/sec.) through 3-dimensional motion analysis methods, that postures of uke were shizenhontai (straight natural posture:NP) and jigohontai (straight defensive posture:DP), VRL of uke were 0% and 100%, respectively. The variables were angular momentum of trunk, lower extremity of attacking leg and supporting leg of tori(the thrower). The data of this study collection were digitized by SIMI Motion Program computed the mean values and the standard deviation calculated for each variables. When performing uchimata according to each posture and VRL of uke and classifying. From the data analysis and discussion, the conclusions were as follows : Angular momentum of trunk when performing uchimata was showed the largest among another angular momenta, and the posture displayed more different than resistant of uke(reciver), but the pattern similar in judo. Angular momentum of trunk of X axis was the largest and Y, Z axis order. Angular momentum of attacking the thigh-leg when performing uchimata was showed the largest among another angular momenta, and the posture displayed more different than resistant of uke(reciver), X axis and Y axis similar, but angular momentum of Z axis of thigh-leg the largest, in kake(application) event in 0% resistance of DP than other variables. Angular momentum in X,Y axis of attacking the lower-leg when performing uchimata was showed that the resistance level displayed more different than posture, but Z axis the largest, in kake(E3) phase in 0% resistance of DP than other variables as same thigh-leg, and the largest from tsukuri(set-up:E2) to kake(E3) phase. X and Z axis Angular momentum of supporting the thigh-leg were similar, regardless of posture and resistance of uke, but Y axis was resistance level. Angular momentum of supporting the thigh-leg was showed the largest in X axis, increased from EO event to E2, and decreased in E3, and angular momenta of Y, X axis were showed the largest in kuzushi(balance breaking) phase when performing uchimata. Angular momentum of supporting the lower leg were similar pattern, regardless of posture and resistance of uke, in Y axis, resistance displayed more difficult the position in NP, and showed opposite angular momentum in tsukuri phase. In conclusion, angular momentum of trunk when performing uchimata was showed the largest, and pattern was similar, regardless of posture than resistant of uke(reciver), magnitude and direction were different each other, and uchimata was Ashi -waza(foot and leg techniques) division but important of trunk action.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2009

Purpose: The purpose is to evaluate the accuracy of correcting the targeting error through the Target Location System (TLS) for the location change error of the reference point which arises from the movement or motion of patient during the treatment using the CyberKnife. Materials and Methods: In this test, Gafchromic MD-55 film was inserted into the head and neck phantom to analyze the accuracy of the targeting, and then the 6 MV X-ray of CyberKnife (CyberKnife Robotic Radiosurgery System G4, Accuray, US) was irradiated. End to End (E2E) program was used to analyze the accuracy of targeting, which is provided by Accuray Corporation. To compute the error of the targeting, the test was carried out with the films that were irradiated 12 times by maintaining the distance within the rage of $0{\pm}0.2\;mm$ toward x, y, z from the reference point and maintaining the angle within the rage of $0{\pm}0.2^{\circ}$ toward roll, pitch, yaw, and then with the films which were irradiated 6 times by applying intentional movement. And the correlation in the average value of the reference film and the test film were analyzed through independent samples t-test. In addition, the consistency of dose distribution through gamma-index method (dose difference: 3%) was quantified, compared, and analyzed by varying the distance to agreement (DTA) to 1 mm, 1.5 mm, 2 mm, respectively. Results: E2E test result indicated that the average error of the reference film was 0.405 mm and the standard deviation was 0.069 mm. The average error of the test film was 0.413 mm with the standard deviation of 0.121 mm. The result of independent sampling t-test for both averages showed that the significant probability was P=0.836 (confidence level: 95%). Besides, by comparing the consistency of dose distribution of DTA through 1 mm, 1.5 mm, 2 mm, it was found that the average dose distribution of axial film was 95.04%, 97.56%, 98.13%, respectively in 3,314 locations of the reference film, consistent with the average dose distribution of sagittal film that was 95.47%, 97.68%, 98.47%, respectively. By comparing with the test film, it was found that the average dose distribution of axial film was 96.38%, 97.57%, 98.04%, respectively, at 3,323 locations, consistent with the average dose distribution of sagittal film which was 95.50%, 97.87%, 98.36%, respectively. Conclusion: Robotic CyberKnife traces and complements in real time the error in the location change of the reference point caused by the motion or movement of patient during the treatment and provides the accuracy with the consistency of over 95% dose distribution and the targeting error below 1 mm.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.137-152
• /
• 2017

The decline in the price of IT devices and the development of the Internet have created a new field called Internet of Things (IoT). IoT, which creates new services by connecting all the objects that are in everyday life to the Internet, is pioneering new forms of business that have not been seen before in combination with Big Data. The prospect of IoT can be said to be unlimited in its utilization. In addition, studies of standardization organizations for smooth connection of these IoT devices are also active. However, there is a part of this study that we overlook. In order to control IoT equipment or acquire information, it is necessary to separately develop interworking issues (IP address, Wi-Fi, Bluetooth, NFC, etc.) and related application software or apps. In order to solve these problems, existing research methods have been conducted on augmented reality using GPS or markers. However, there is a disadvantage in that a separate marker is required and the marker is recognized only in the vicinity. In addition, in the case of a study using a GPS address using a 2D-based camera, it was difficult to implement an active interface because the distance to the target device could not be recognized. In this study, we use 3D Depth recognition camera to be installed on smartphone and calculate the space coordinates automatically by linking the distance measurement and the sensor information of the mobile phone without a separate marker. Coordination inquiry finds equipment of IoT and enables information acquisition and control of corresponding IoT equipment. Therefore, from the user's point of view, it is possible to reduce the burden on the problem of interworking of the IoT equipment and the installation of the app. Furthermore, if this technology is used in the field of public services and smart glasses, it will reduce duplication of investment in software development and increase in public services.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.232-247
• /
• 2005

Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)