• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.130-134
• /
• 2015

This research proposes the use of a composition modulated (ZrO₂)_x(Al₂O₃)_1-x film as a charge trapping layer for charge trap flash memory; this is possible when the Zr (Al) atomic percent is controlled to form a variable bandgap as identified by the valence band offsets and electron energy loss spectrum measurements. Compared to memory devices with uniform compositional (ZrO₂)_0.1(Al₂O₃)_0.9 or a (ZrO₂)_0.92(Al₂O₃)_0.08 trapping layer, the memory device using the composition modulated (ZrO₂)_x(Al₂O₃)_1-x as the charge trapping layer exhibits a larger memory window (6.0 V) at the gate sweeping voltage of ±8 V, improved data retention, and significantly faster program/erase speed. Improvements of the memory characteristics are attributed to the special energy band alignments resulting from non-uniform distribution of elemental composition. These results indicate that the composition modulated (ZrO₂)_x(Al₂O₃)_1-x film is a promising candidate for future nonvolatile memory device applications.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권2호
• /
• pp.121-129
• /
• 2011

It is progressing as new advents and remarkable developments of mobile device every year. On the upper line reason, NAND FLASH large density memory demands which can be stored into portable devices have been dramatically increasing. Therefore, the cell size of the NAND Flash memory has been scaled down by merely 50% and has been doubling density each per year. [1] However, side effects have arisen the cell distribution and reliability characteristics related to coupling interference, channel disturbance, floating gate electron retention, write-erase cycling owing to shrinking around 20nm technology. Also, FLASH controller to manage shrink effect leads to speed and current issues. In this paper, It will be introduced to solve cycling, retention and fail bit problems of sub-deep micron shrink such as Virtual negative read used in moving read, randomization. The characteristics of retention, cycling and program performance have 3 K per 1 year and 12.7 MB/s respectively. And device size is 179.32 $mm^2$ (16.79 mm ${\times}$ 10.68 mm) in 3 metal 26 nm CMOS.

• 감성과학
• /
• 제18권2호
• /
• pp.65-74
• /
• 2015

본 연구에서는 현대 사회의 주요 흐름인 '발전과 진화'의 방향성에서 한발 물러나, '지우는' 경험과 그 감성에 대한 연구 가능성을 탐색하고자 하였다. 이를 위해, 지금까지 많은 주목을 받지 못한 키워드인 지우는 경험에 대한 통합적 문헌조사를 우선적으로 수행하였으며, 이를 토대로 실제 사용자들을 대상으로 하는 맥락 질문법을 진행하였다. 맥락 질문법의 경우, 아날로그적인 연필-지우개 사용맥락, 디지털의 대표적인 맥락인 컴퓨터-키보드 사용맥락, 마지막으로 최근 활발한 활용을 보이는 Tablet PC 사용맥락에 따른 사용자들을 모집한 후, 각각의 사용맥락에 대한 In-depth한 정성적 인터뷰 및 정량적 자료 수집을 진행하였다. 결과적으로, 지우는 맥락에서는 특정 내용을 잘 지워내는 상황적 효용뿐만 아니라 이를 수행하는 사용자에게도 정서적으로 만족스러운 경험을 제공해야함을 확인할 수 있었다. 해당 연구에서 진행된 탐험적 시도 및 실증적 결과들은 향후 연구들에 대한 학술적 접근과 함께 실용적 관점에서의 디자인 함의를 제공할 수 있을 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.120-120
• /
• 2011

Graphene is a carbon based material and it has great potential of being utilized in various fields such as electronics, optics, and mechanics. In order to develop graphene-based logic systems, graphene field-effect transistor (GFET) has been extensively explored. GFET requires supporting devices, such as volatile memory, to function in an embedded logic system. As far as we understand, graphene has not been studied for volatile memory application, although several graphene non-volatile memories (GNVMs) have been reported. However, we think that these GNVM are unable to serve the logic system properly due to the very slow program/read speed. In this study, a GVM based on the GFET structure and using an engineered graphene channel is proposed. By manipulating the deposition condition, charge traps are introduced to graphene channel, which store charges temporarily, so as to enable volatile data storage for GFET. The proposed GVM shows satisfying performance in fast program/erase (P/E) and read speed. Moreover, this GVM has good compatibility with GFET in device fabrication process. This GVM can be designed to be dynamic random access memory (DRAM) in serving the logic systems application. We demonstrated GVM with the structure of FET. By manipulating the graphene synthesis process, we could engineer the charge trap density of graphene layer. In the range that our measurement system can support, we achieved a high performance of GVM in refresh (>10 ${\mu}s$) and retention time (~100 s). Because of high speed, when compared with other graphene based memory devices, GVM proposed in this study can be a strong contender for future electrical system applications.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.85-90
• /
• 2012

In this paper, we compared and analyzed 3D silicon-oxide-nitride-oxide-silicon (SONOS) multi layer flash memory devices fabricated on nitride or oxide layer, respectively. The device fabricated on nitride layer has inferior electrical properties than that fabricated on oxide layer. However, the device on nitride layer has faster program / erase speed (P/E speed) than that on the oxide layer, although having inferior electrical performance. Afterwards, to find out the reason why the device on nitride has faster P/E speed, 1/f noise analysis of both devices is investigated. From gate bias dependance, both devices follow the mobility fluctuation model which results from the lattice scattering and defects in the channel layer. In addition, the device on nitride with better memory characteristics has higher normalized drain current noise power spectral density ($S_{ID}/I^2_D$>), which means that it has more traps and defects in the channel layer. The apparent hooge's noise parameter (${\alpha}_{app}$) to represent the grain boundary trap density and the height of grain boundary potential barrier is considered. The device on nitride has higher ${\alpha}_{app}$ values, which can be explained due to more grain boundary traps. Therefore, the reason why the devices on nitride and oxide have a different P/E speed can be explained due to the trapping/de-trapping of free carriers into more grain boundary trap sites in channel layer.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.111-121
• /
• 2012

본 연구에서는 $0.5{\mu}m$ 급 다결정 실리콘 박막 트랜지스터를 제작하고 이를 최적화 했다. 실험 결과, 비정질 실리콘을 증착 후 저온 어닐링을 통해 보다 큰 grain 크기를 가지는 active 영역을 형성하는 것이 소자의 SS(Subthreshold Swing), DIBL(Drain Induced Barrier Lowering), 그리고 on-current의 성능 향상을 가져온다는 것을 확인 할 수 있었다. 또한 이를 바탕으로 SONOS 플래시 메모리를 제작하였으며 그 특성을 분석했다. 게이트로부터 전자의 back tunneling 현상을 억제함과 동시에 제작한 소자가 원활한 program/erase 동작을 하기 위해서는 O/N/O 두께의 최적화가 필요하다. 따라서 시뮬레이션을 통해 이를 분석하고 O/N/O 두께를 최적화 하여 SONOS 플래시 메모리의 특성을 개선하였다. 제작한 소자는 2.24 V의 threshold voltage($V_{th}$) memory window를 보였으며 메모리 동작을 잘 하는 것을 확인 할 수 있었다.