• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.77-91
• /
• 2015

This study aims to suggest adequate soil management through the analysis of physicochemical properties of soil in the planting grounds of Incheon International Airport, which was constructed on a massive land reclamation site. Study areas were 5 sites at the international business complex, the passenger terminal, the airport support complex, the free trade zone, and the access road. Soil profile analysis showed that 9 plots out of the 27 plots were hardpan and heterospere within 80cm from the soil surface. The earth laid on the ground was categorized as gravel based soil(4 plots), dredged soil from the sea bottom and mixed reclamation materials(2 plots), clay with poor permeability(3 plots) and waste construction material(1 plot). Average soil hardness was $11.5kg/cm^2$ and soil textures were sandy soil, sandy loam and loamy sand. Average soil pH was 6.7 and average organic matter content was 0.7%. Electrical conductivity was 0.0dS/m and exchangeable cation concentrations were $Ca^{2+}$ 3.4cmol/kg, $Mg^{2+}$ 1.5cmol/kg, $K^+$ 0.3cmol/kg and $Na^+$ 1.0cmol/kg. Average cation exchange capacity was 11.0cmol/kg. Although average figures in Solum mostly meet the landscape design criteria, properties of each soil layer showed various values sometimes over the limit. Base saturations were $Ca^{2+}$ 29.9%, $Mg^{2+}$ 13.3% and $K^+$ 3.7% for lower soil, $Ca^{2+}$ 33.3%, $Mg^{2+}$ 17.0% and $K^+$ 2.7% for mid-soil and $Ca^{2+}$ 32.6%, $Mg^{2+}$ 12.2% and $K^+$ 1.9% for upper soil. Exchangeable sodium percentages were 16.4% for lower soil, 7.5% for mid-soil and 4.7% upper soil. Sodium adsorption rates were 0.8 for lower soil, 0.3 for mid-soil and 0.2 for upper soil. Factors affecting to the vegetation growth were heterogeneity and poorness of solum, disturbance of dredged soils, high soil hardness including hardpan in the subsurface soil layer and shallow effective soil depth, high soil acidity, imbalance of base contents, low organic matter content and low available phosphate levels in the soil.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.97-106
• /
• 2004

The study was conducted to investigate the effects of practical variations in feed restriction, pre-slaughter handing and chilling regime on pork quality during ageing. A total of twenty male landraces were allocated into three treatments(i.e., pre-slaughter feeding, stress and chilling regime) in a factorial arrangement. pH, temperature, free calcium ions, WB-shear force, sarcomere length, cooking loss, drip loss and objective color were determined during rigor development and/or 1, 3, 7 d postmortem. Pre-slaughter chasing stress for approximately 15 min had no effects on pH/temperature profile and objective meat quality. There was an interaction(P < 0.05) between the fasting treatment and chi1ling regime for muscle temperature at pH 6.2. Sarcomere length indicated that the current experiment conditions did not induce muscle shortening, with 1.7 to 1.8 ${\mu}m$, in spite of a significant effect of the fasting treatment (P<0.01). Pigs fed until the morning of slaughter showed a low WB-shear force(P < 0.05) until 3 d at I "C. The treatment also resulted in a higher Hunter L* and a*(P < 0.05) at 24 h and 7 d. Fasted pigs showed a significantly(P < 0.05) reduced cooking loss. The current results indicated that feeding upon the morning of slaughter became detrimental on meat color and the negative effect on cooking loss were linearly elevated with increased ageing time. On the other hand, WB-shear force did not distinguishable after 3 d. Collectively, it appeared that feed restriction from a day before slaughter could produce more a desirable meat quality at the time of consuming. However, the limited effect of animal handling and chilling rate on meat quality is not necessarily to extend to that these do not affect pork quality, as that largely depends on experimental design.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.81-87
• /
• 2006

Purpose: Few researches have been peformed on the dose distribution of the moving organ for radiotherapy so far. In order to simulate the organ motion caused by respiratory function, multipurpose phantom and moving device was used and dosimetric measurements for dose distribution of the moving organs were conducted in this study. The purpose of our study was to evaluate how dose distributions are changed due to respiratory motion. Materials and Methods: A multipurpose phantom and a moving device were developed for the measurement of the dose distribution of the moving organ due to respiratory function. Acryl chosen design of the phantom was considered the most obvious choice for phantom material. For construction of the phantom, we used acryl and cork with density of $1.14g/cm^3,\;0.32g/cm^3$ respectively. Acryl and cork slab in the phantom were used to simulate the normal organ and lung respectively. The moving phantom system was composed of moving device, moving control system, and acryl and cork phantom. Gafchromic film and EDR2 film were used to measure dose ditrbutions. The moving device system may be driven by two directional step motors and able to perform 2 dimensional movements (x, z axis), but only 1 dimensional movement(z axis) was used for this study. Results: Larger penumbra was shown in the cork phantom than in the acryl phantom. The dose profile and isodose curve of Gafchromic EBT film were not uniform since the film has small optical density responding to the dose. As the organ motion was increased, the blurrings in penumbra, flatness, and symmetry were increased. Most of measurements of dose distrbutions, Gafchromic EBT film has poor flatness and symmetry than EDR2 film, but both penumbra distributions were more or less comparable. Conclusion: The Gafchromic EBT film is more useful as it does not need development and more radiation dose could be exposed than EDR2 film without losing film characteristics. But as response of the optical density of Gafchromic EBT film to dose is low, beam profiles have more fluctuation at Gafchromic EBT. If the multipurpose phantom and moving device are used for treatment Q.A, and its corrections are made, treatment quality should be improved for the moving organs.

• Asian Oncology Nursing
• /
• v.3 no.2
• /
• pp.133-144
• /
• 2003

This study is carrying out a before and after experiment design for the non-equal comparative group to identify the effects of the breast self-examination education on breast self-examination participant education compliance and health promotion in women. The subject of this study was 58 women residing in Chungju. Their age ranged from 20 to 40. These women were not pregnant or did not breast feed, as well as they did not have any breast disease, at the time of survey. They were available for the response to the questionnaires, and understood the purpose of this study. They also agreed to participate in the study, and responded to the 3rd time questionnaires to the end. Thus, brochures and lectures were provided side by side to a group of 19 of those women, and only brochures were provided to another group of 39 of those women. With regard to education, a brochure and a program using a breast model were applied. Then, the frequency of the breast self examination compliance, breast self examination capability and the relations between the breast self examination and activities to promote health were measured, before the education, after 4 weeks of education and after 12 weeks of education. Before education and after 4 weeks of education. I collected the questionnaires myself visiting them, and after 12 weeks of education, the questionnaires were collected by mail. In relation to the study tool, the breast self examination activity was measured by two measuring tools: breast self examination activity frequency and breast self examination compliance capability. As for the frequency, the number of self examination for the period of 3 months, before the questionnaire survey, was measured in the form of self report. In relation to the tool to measure the breast self examination capability, the BSEPRI tool, which was developed by Wood in 1994, was used. Here, as the score was higher, the capability was indicated to be higher. The translated and revised version of Health Promoting Lifestyle Profile II (Walker, Sechrist & Pender. 2002) was used as a tool for health promotion. As the measured score was higher, the health promoting activity was indicated to be higher. The results of this study were as follows: 1. As a result of checking the breast self examination compliance frequency between the experiment group that received the breast self examination participant education and the comparative group that did not receive the education, there was a significant difference in interaction between groups by time, as time passed by. 2. As a result of checking the breast self examination compliance capability between the experiment group and the comparative group, there was a significant difference in interaction between groups by time, as time passed by. 3. As a result of carrying out a repetitive measurement analysis, between the experiment group that received the breast self examination education and the comparative group that did not receive the education, which was carried out to validate the hypothesis that the former would have higher health promoting activities than the latter, there was no significant difference after the breast self examination education was conducted.

• Korean Journal of Organic Agriculture
• /
• v.17 no.2
• /
• pp.237-251
• /
• 2009

This study was carried out to evaluate the effect of replacing antibiotics by organic acid mixture on growth performances and blood metabolites in growing pigs. Twenty-five crossbred pigs (Large White${\times}$Landrace) at the age of 79 days were fed five different diets by supplementing organic acid mixture and chlortetracycline. The experimental diets were consisted of diets without antibiotics supplementation (control), diets added 100mg/kg of chlortetracycline to control diet (T1), diets added 100mg/kg of chlortetracycline and 0.1% of $Acidomix^{(R)}$ (comprising formic acid 25%, sorbic acid 10%, fumaric acid 10%) to control diet (T2), diets added 0.1% of $Acidomix^{(R)}$ to control diet (T3), and diets added 0.3% of $Acidomix^{(R)}$ to control diet (T4). The changes in feed conversion ratio, average daily gain and blood metabolites were investigated. Twenty-five pigs were allotted to five treatments with five replications of each and the experiment was conducted on the basis of complete randomized design for 6 weeks. Average daily gain was significantly (p<0.05) different between T4 and control diets. All treatments including diets added $Acidomix^{(R)}$ and chlortetracycline were slightly higher than control diets. The feed intakes did not show a significant difference between the control and other treatments, and did not give change in feed intake by the addition of $Acidomix^{(R)}$. No differences on feed conversion ratio among treatments were observed but T4 and T3 treatments showed lower value than other treatments. The concentrations of blood urea nitrogen, total cholesterol and triglyceride were significantly (p<0.05) different among treatments, but their values were within the normal range representing that effects on blood profile by organic acid or antibiotics supplementation were not found. The results from this study indicated that adding chlortetracycline or organic acid mixtures to diets showed tendency to improve average daily gain and feed conversion ratio in growing pigs. These results showed that antibiotics could be replaced by organic acid mixture in growing pig diets, leading to stimulated growth and improved feed conversion ratio.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.371-383
• /
• 2012

Shaping the root canal system to maintain original canal curvature is essential to clinical success in endodontic treatment. Opposed to most root canals that are curved, endodontic instruments are made from straight metal blanks. They have a tendency of straightening the root canal during preparation and frequently result in procedural errors. A new treatment method to maintain original canal curvature during shaping has been introduced for preventing procedural errors. The aim of this study was to compare the ability of instruments to maintain original canal curvature of continuous rotary system and single file system. Thirty ISO 15, 0.02 taper, Endo Training Blocks(Dentsplay Maillefer) were used. Specimens were assigned to 1 of 3 groups for shaping: specimens in group 1 were shaped with ProFile #20/.06 at the WL. Specimens in group 2 were shaped with Mtwo #35/.04 at the WL. Specimens in group 3 were shaped with WaveOne Primary reciprocating files at the WL after the glide path was achieved with PathFile. Pre- and postinstrumentation digital images were superimposed and processed with Matlab r2010b(The MathWorks Inc, Natick, MA) software to analyze the curvature-radius ratio(CRr), representing canal curvature modification. Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file were analyzed with 1-way ANOVA(P<.05). Data for comparison on the ability of instruments to maintain original canal curvature depending on each Ni-Ti file system were analyzed with independent t-test(P<.05). A statistically significant difference(P<0.05) was noted on each Ni-Ti file. ProFile and WaveOne instrumentations maintained the original canal curvature significantly better(P<0.05) than Mtwo file. There were no significant difference(P>0.05) between continuous rotary system and single file system. Under the conditions of this study, ProFile and WaveOne instruments maintained the original curvature significantly better than Mtwo file and were less modification of the canal curvature compared. There was no significant difference between continuous rotary system and single file system in shaping of simulated canals. As clinical practitioners, it may be advantages to use hybrid approach when root canal shapes depending on the design and usage of Ni-Ti files.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.151-176
• /
• 2021

As the information technology industry develops, various kinds of data are being created, and it is now essential to process them and use them in the industry. Analyzing and utilizing various digital data collected online and offline is a necessary process to provide an appropriate experience for customers in the industry. In order to create new businesses, products, and services, it is essential to use customer data collected in various ways to deeply understand potential customers' needs and analyze behavior patterns to capture hidden signals of desire. However, it is true that research using data analysis and UX methodology, which should be conducted in parallel for effective service development, is being conducted separately and that there is a lack of examples of use in the industry. In thiswork, we construct a single process by applying data analysis methods and UX methodologies. This study is important in that it is highly likely to be used because it applies methodologies that are actively used in practice. We conducted a survey on the topic to identify and cluster the associations between factors to establish customer classification and target customers. The research methods are as follows. First, we first conduct a factor, regression analysis to determine the association between factors in the happiness data survey. Groups are grouped according to the survey results and identify the relationship between 34 questions of psychological stability, family life, relational satisfaction, health, economic satisfaction, work satisfaction, daily life satisfaction, and residential environment satisfaction. Second, we classify clusters based on factors affecting happiness and extract the optimal number of clusters. Based on the results, we cross-analyzed the characteristics of each cluster. Third, forservice definition, analysis was conducted by correlating with keywords related to happiness. We leverage keyword analysis of the thumb trend to derive ideas based on the interest and associations of the keyword. We also collected approximately 11,000 news articles based on the top three keywords that are highly related to happiness, then derived issues between keywords through text mining analysis in SAS, and utilized them in defining services after ideas were conceived. Fourth, based on the characteristics identified through data analysis, we selected segmentation and targetingappropriate for service discovery. To this end, the characteristics of the factors were grouped and selected into four groups, and the profile was drawn up and the main target customers were selected. Fifth, based on the characteristics of the main target customers, interviewers were selected and the In-depthinterviews were conducted to discover the causes of happiness, causes of unhappiness, and needs for services. Sixth, we derive customer behavior patterns based on segment results and detailed interviews, and specify the objectives associated with the characteristics. Seventh, a typical persona using qualitative surveys and a persona using data were produced to analyze each characteristic and pros and cons by comparing the two personas. Existing market segmentation classifies customers based on purchasing factors, and UX methodology measures users' behavior variables to establish criteria and redefine users' classification. Utilizing these segment classification methods, applying the process of producinguser classification and persona in UX methodology will be able to utilize them as more accurate customer classification schemes. The significance of this study is summarized in two ways: First, the idea of using data to create a variety of services was linked to the UX methodology used to plan IT services by applying it in the hot topic era. Second, we further enhance user classification by applying segment analysis methods that are not currently used well in UX methodologies. To provide a consistent experience in creating a single service, from large to small, it is necessary to define customers with common goals. To this end, it is necessary to derive persona and persuade various stakeholders. Under these circumstances, designing a consistent experience from beginning to end, through fast and concrete user descriptions, would be a very effective way to produce a successful service.

• Journal of Life Science
• /
• v.34 no.1
• /
• pp.18-27
• /
• 2024

Laying hens are known to be able to 'bio-accumulate' the health-promoting ingredients of their diet into eggs. The purpose of this study was to characterize lignan-rich eggs as functional food fed with Schisandra fruit by-product (SCP). Experimental diets were formulated using yellow corn, rice bran, soybean meal, fish meal, meat bone meal, poultry meal, vitamin premix, mineral premix, CaCO₃, and supplemented Schisandra chinensis by-product. This experiment conducted a completely randomized design with 5 treatments for 5 laying hens. Levels of SCP were fed control diet or each formulated diet containing 1%, 3%, 5% and 7% SCP powder. The weight of eggs and the lignan content in white and yolk of egg were investigated every 7 days. Egg production and egg weight were not affected by diet at less than 5% SCP in the diet, but were significantly reduced when the diet was supplemented with a high concentration of 7% SCP after 3 weeks. Yolks and white in eggs were analyzed by using a high performance liquid chromatography (HPLC) to determine the lignans profile. Higher dietary SCP supplementation significantly increased gomisin N and schisandrin C in Acetonitrile (p<0.05). Gomisin N in egg white increased in a concentration-dependent manner, but shisandrin C not detected. These results indicated that the use of SCP powder in layering diets was effective in egg quality and for the production of lignans fortified eggs. In conclusion, dietary supplementation of Schisandra by-product with less than 5% can produce lignans-enrich eggs used as functional foods.