• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.1
• /
• pp.1-19
• /
• 2003

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.193-211
• /
• 1998

Without a solid marketing system in placed, the fashion industry cannot flourish on out-standing design or technology alone. Even though the significance of collecting and analyzing information, merchandising, and retail distribution is recognized, these functions are not firmly rooted or prevalent in our industry. In contrast, Italy which possesses similar demographic traits such as the lack of natural resources and other physical factors has succeed-ed in globalizing its fashion market by responding swiftly and exercising flexiblity to its constantly changing consumer demand. This in turn has earned Italy the competitive edge in the global fashion arena. Italy's unique management skills and operation know-how, along with successful market strategies come into play in bringing competitiveness to Italy's fashion market. Firstly, smaller companies with ability to adopt swiftly to the ever changing market. Secondly, fashion friendly social environment. Thirdly, niche marketing through highly specialized system and differentiation. Fourthly, timeless innovation through intense corporate competition. Lastly, establishment of foundations to support the industry through diverse networking. The alone building blocks have formed a basis for erecting an unparalleled market with a reputation for excellence in design and quality in the global fashion world. This study has examined how Italy's fashion industry has evolved from an underdeveloped textile business into a cutting edge fashion in-dustry. Italy's unique business processes and practices were studied to come up with a collection and merchandising ideas in a niche market. By selecting this venue we are able to continuously grow and develop in a market with diverse consumer needs. To analyze the Italian fashion market, data from 3 institutions were utilized, namely, CIT-ER which has provided consumer trends and sales analysis, SITA,a data service provided statistics from the textile and apparel businesses, and NBI has also furnished valuable data. Italian consumer preference, buying behavior, consumer profile, retail channels and other related data from the above institutions has formed a backbone for market segmentation and target markets, and as a result, we were able to zero in on the type of consumer, produce, pricing and retail channels for our womenswear. Going forward the direction is to elevate product image and pretige, and create syn-ergy between related industries, and at the same note, in order to develop internationally recognized brands such as Max Mara and Benetton. Certain elements such as the specialization of the fashion industry, alon-g with fashion-related data base and systems support, and most importantly experts with acute fashion sense and capacity to analyze pertinent data are in need. I firmly believe that we can achieve Italy's level in the fashion market with support from the government and unrelenting effort within the industry itself, and hope that this report can prove to be useful.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2006

The Integrated Ballistics Identification Systems (IBIS) is widely used for bullet and casing signature identification. The IBIS obtains a pair of ballistic signatures from two bullets (or casings) using optical microscopy, and estimates a correlation score which can represent the degree of signature match. However, this method largely depends on lighting and surface conditions because optical image contrast is primarily a function of test surface's slope, shadowing, multiple reflections, optical properties, and illumination direction. Moreover, it can be affected with surface height variation. To overcome these problems and improve the identification system, we used well known surface topographic techniques, such as confocal microscopy and white-light scanning interferometry. The measuring instruments were calibrated by a NIST step height standard and verified by a NIST sinusoidal profile roughness standard and a commercial roughness standard. We also suggest a new analysis method for the ballistic identification. In this method, the maximum cross-correlation function CCFmax is used to quantify the degree of signature match. If the compared signatures were exactly the same, CCFmax would be $100\%$.

• Toxicological Research
• /
• v.34 no.3
• /
• pp.221-229
• /
• 2018

Tenofovir nanoparticles are novel therapeutic intervention in human immunodeficiency virus (HIV) infection reaching the virus in their sanctuary sites. However, there has been no systemic toxicity testing of this formulation despite global concerns on the safety of nano drugs. Therefore, this study was designed to investigate the toxicity of Tenofovir nanoparticle (NTDF) on the liver and kidney using an animal model. Fifteen adult male Sprague-Dawley (SD) rats maintained at the animal house of the biomedical resources unit of the University of KwaZulu-Natal were weighed and divided into three groups. Control animals (A) were administered with normal saline (NS). The therapeutic doses of Tenofovir (TDF) and nanoparticles of Tenofovir (NTDF) were administered to group B and C and observed for signs of stress for four weeks after which animals were weighed and sacrificed. Liver and kidney were removed and fixed in formal saline, processed and stained using H/E, PAS and MT stains for light microscopy. Serum was obtained for renal function test (RFT) and liver function test (LFT). Cellular measurements and capturing were done using ImageJ and Leica software 2.0. Data were analysed using graph pad 6, p values < 0.05 were significant. We observed no signs of behavioural toxicity and no mortality during this study, however, in the kidneys, we reported mild morphological perturbations widening of Bowman's space, and vacuolations in glomerulus and tubules of TDF and NTDF animals. Also, there was a significant elevation of glycogen deposition in NTDF and TDF animals when compared with control. In the liver, there were mild histological changes with widening of sinusoidal spaces, vacuolations in hepatocytes and elevation of glycogen deposition in TDF and NTDF administered animals. In addition to this, there were no significant differences in stereological measurements and cell count, LFT, RFT, weight changes and organo-somatic index between treatment groups and control. In conclusion, NTDF and TDF in therapeutic doses can lead to mild hepatic and renal histological damage. Further studies are needed to understand the precise genetic mechanism.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.636-643
• /
• 1999

Ectodermal dysplasia is a genetic birth defect in which at least abnormally develop two structures derived from the ectoderm. It is usually inherited in autosomal dominant or autosomal recessive pattern. Oral manifestations are oligodontia, anodontia, dysmorphic teeth(conical shape), decreased occlusal vertical dimension and alveolar bone. Extraoral signs may include decreased or absent sweat glands, sparse and fine hair, saddle nose, hearing loss and decreased production of body fluids including saliva. Most affected children require extensive dental treatment to restore their appearance and help the development of a positive self image. The patient's overclosed profile was due to a decreased vertical dimension. The use of overdenture is to preserve erupted teeth, to accomodate the newly constructed occlusal plane, to improve retention and stability of denture and to maintain the remaining alveolar bone. The restoration of vertical dimension improved the child's speech, swallowing, and eating. Growth continue until the age of approximately 18. As child grows, replacement dentures will have to be fabricated primarily to accomodate increasing vertical dimension and changing dentition. Implants may be indicated later if the alveolar bone is adequate. Periodic recall visits are advised, to monitor the dentures during periods of growth and development, and eruption of the permanent teeth.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.1
• /
• pp.41-48
• /
• 2010

1. Objective There has been a few trials to diagnose Sasang Constitution by using EEG, but has not been studied intensively. For the purpose of practical diagnosis, the characteristics of EEG for each constitution should be studied first. Recently it has been shown that Sasang Constitution might be related to harm avoidance and novelty seeking in temperament and character profiles. Based on this finding, we propose a visual stimulation method to evoke a EEG response which may discriminate difference between constitutional groups. Through the experiment with this method, we tried to reveal the characteristics of EEG of each constitutional groups by the method of event-related potentials. 2. Methods: We used facial visual stimulation to verify the characteristics of EEG for each constitutional groups. To reveal characteristic in sensitivity and latency of response, we added several levels of noise to facial images. 6 male subjects(2 Taeeumin, 2 Soyangin, 2 Soeumin) participated in this study. All subjects are healthy 20's. To remove artifacts and slow modulation, we removed EOG contaminated data and renormalization is applied. To extract stimulation related components, normalized event-related potential method was used. 3. Results: From Oz channels, it is verified that facial image processing components are extracted. For lower level noise, components related to the visual stimulation were clearly shown in Oz, Pz, and Cz channels. Pz and Cz channels show differences among 3 constitutional groups in maximum around 200 msec. Especially moderate level of noise looks appropriate for diagnosis. 4. Conclusion: We verified that the visual stimulation with facial emotion might be a good candidate to evoke the differences between constitutional groups in EEG response. The differences shown in the experiment may imply that the process of emotion has distinct tendencies in latencies and sensitivity for each consitutional group. And this distinction might be related to the temperament profile of consitutional groups.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.303-309
• /
• 2007

Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 ($200{\mu}m$). And the processing time was 15min (1/20 time to form $200{\mu}m$ coping). The confocal laser scanning microscope (PASCAL 5, Carl Zeiss, Bernried, Germany) was used to measure the thickness of the pure gold layer electroformed on the gold strips. Half of the gold strip was coated two times with electroformed gold, and the other half one time. The data from the cone focal laser system was processed to get the vertical profile of the strips and the difference of the vertical height between the double coated and single coated layer was regarded as the thickness of the gold coating. The layer thickness value to built 3D image of the cone-focal laser was set $0.5{\mu}m$. Next to the measurement of the thickness of the coating, the Vicker's hardness test was done. It was performed on the double coated surface, single coated surface and non-coated surface (back side) three times each. Results. The mean thickness value gained from gold electroforming technique was measured to be $22{\mu}m$ for sample 1, $23{\mu}m$ for sample 2, $21{\mu}m$ for sample 3. In the same condition of time, power and the amount of electrolyte, the data showed no difference between samples. According to the results of variance analysis, the differences among the variations in number of coating were statistically insignificant (p>0.05), meaning that the two times of gold electroforming coating did not change the hardness of gold-silver-palladium alloy. Conclusion. The test of thickness of gold coating proved the coherency of the gold electroforming procedure, in other words, when the power, the exposed surface area, processing time and the amount of electrolytes were set same, the same thickness of gold would be coated on. The hardness test showed that the electroformed gold coating did not change the hardness of the gold-silver-palladium alloy when it is coated not more than $45{\mu}m$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.417-427
• /
• 2016

This paper is the first investigation of the steady flow characteristics of an SI engine with a semi-wedge combustion chamber as a function of the port shape. For this purpose, the planar velocity profiles were measured at the 1.75B position by particle image velocimetry. The flow patterns were examined with both a straight and a helical port. Two swirls were observed up to 4 mm valve lift with the straight port and up to 2 mm with the helical one; however, only one swirl was present after these lifts. The flow characteristics changed suddenly between 4 and 5 mm lift in the straight port; on the other hand, the change with lift was gradual with the helical port - the transition points between flow regimes were different with the port shapes. In addition, the centers of the swirls were relatively far from the cylinder center so that the effect of eccentricity may not be negligible at 1.75B, regardless the shape. The eccentricity values with the straight port were especially high - over 0.5 for all lifts. Finally, real velocities were found to be much lower than those predicted by the assumption of ISM evaluation, with the profiles differing qualitatively as well.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.407-415
• /
• 2010

MT soundings were carried out in 2008, in northern Victoria, Australia, as a continuing collaboration research of 2007 between Republic of Korea, Australia, and Japan. The main purpose of this research is to investigate electrical conductivity structure and thus help understanding of tectonic structure in central Victoria, which is believed to be closely linked to mineralization and magmatic processes of this region. The survey area is located in western Lachlan Fold Belts, which is the part of Tasman Fold Belts in southeastern Australia. An MT profile of 2008 is almost parallel to the one of 2007 and approximately 50 km away. The 2D inversion result of MT data also shows that the position of conductivity discontinuity near surface are well matched with the positions of major faults, such as Avoca Fault, which is the structural boundary between Stawell and Bendigo Zones, and Heathcote Fault Zone, which marks the boundary between Bendigo and Melbourne Zones. It is also confirmed from resistivity image that internal faults in Bendigo Zone are in listric form, which is implied to be formed by structural shortening during compressional orogenic activity in Silurian.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.294-302
• /
• 2005

The purpose of this study was to evaluate the canal configuration after shaping by ProFile. ProTaper and K-Flexofile in simulated resin canals with different angles of curvature. Three types of instruments were used: ProFile. ProTaper. K-Flexofile. Simulated root canals. which were made of epoxy resin. were prepared by ProFile. ProTaper with rotary instrument using a crown-down pressureless technique. and hand instrumentation was performed by K-Flexofile using a step-back technique. All simulated. canals were prepared up to size 25 file at end-point of preparation. Pre and post instrumentation images were recorded with Scanner. Assessment of canal shape was completed with Image Analysis program. Measurements were made at 1. 2. 3. 4. 5. 6. 7. 8. 9 and 10mm from the apex. At each level. outer canal width. inner canal width. total canal width. and amount of transportation from original axis were recorded. Instrument deformation and fracture were recorded. Data were analyzed by means of one-way ANOVA analysis of variance and the Sheffe's test. The result was that ProFile and ProTaper maintain original canal shape regardless of the increase of angle of curvature than K-Flexofile. ProFile show significantly less canal transportation and maintained original canal shape better than ProTaper.