• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.599-603
• /
• 2003

This paper present an error compensation system and On-Machine Measurement(OMM) system for improving the machining accuracy of ultra-precision lathe. The Fast-Tool-Servo(FTS) driven by a piezoelectric actuator is applied for error compensation system. The controller is implemented on the 32bit DSP for feedback control of piezoelectric actuator. The control system is designed to compensates three kinds of machining errors such as the straightness error of X-axis slide, the thermal growth error of the spindle. and the squareness between spindle and X-axis slide. OMM is preposed to measure the finished profile of workpiece on the machine-tool using capacitive sensor with highly accurate ruby tip probe guided by air bearing. The data acquisition system is linked to the CNC controller to get the position of each axis in real-time. Through the experiments, it is founded that the thermal growth of spindle and tile squareness error between spindle and X-axis slide influenced to machining error more than straightness error of X-axis slide in small travel length. These errors were simulated as a sinusoidal signal which has very low frequency and the FTS could compensate the signal less than 30 m. The implemented OMM system has been tested by measuring flat surface of 50 mm diameter and shows measurement error less than 400 mm

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2022

In order to install ultra wide band and ultra long-haul transmission link based on standard single mode fiber, optical signal distortion due to chromatic dispersion and nonlinear Kerr effect must to be compensated. In this paper, optical link consisted of dispersion management and optical phase conjugation is proposed for compensation of the distorted wavelength division multiplexed (WDM) channels. Dispersion map profile in the proposed dispersion-managed link is configured by periodic repetitive shape, and optical phase conjugator is placed at various position including the midway of total transmission length. It is confirmed from simulation results that when the residual dispersion per span (RDPS) selected in the proposed dispersion-managed link to be large, the compensation of distorted WDM channels in the non-midway OPC system is more improved than the conventional dispersion-managed link.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.331-337
• /
• 2022

The length of optical fiber in dispersion-managed link combined with optical phase conjugation to compensate for signal distortion caused by chromatic dispersion and nonlinear Kerr effect is a major factor determining the compensation effectiveness. The dispersion-managed link consists of several fiber spans in which standard single mode fiber and dispersion compensating fiber are arranged. In this paper, the compensation effect in the link that changes residual dispersion per span only by adjusting the length of one type of optical fiber, which is different in the first half link and the second half link with respect to optical phase conjugator (OPC), has been investigated. It was confirmed that the best compensation for 960 Gb/s wavelength division multiplexed signal could be obtained in the dispersion-managed link, in which the cumulative dispersion profile is symmetric around the OPC, and the cumulative dispersion amount is all positive in the first half, and all the cumulative dispersion amount is distributed negatively in the second half.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.457-462
• /
• 2023

We proposed a flexible link configuration in a system combining mid-span spectral inversion (MSSI) and dispersion management used for long-distance transmission of high-capacity optical signals such as wavelength division multiplexing signals, and examined specific methods to increase chromatic dispersion and nonlinear distortion compensation effects. The dispersion map proposed to increase the flexibility of dispersion-managed link configuration has a 'random-inverse' structure. That is, in the proposed dispersion map, the residual dispersion per span (RDPS) of each fiber span in the first half section up to the optical phase conjugator is randomly distributed, and the RDPS distribution in the second half section reverses the distribution pattern of the first section. Although the proposed dispersion map has a random distribution of RDPS, it was confirmed that the distortion compensation effect is improved due to the fact that the dispersion profile is symmetrical with respect to the optical phase conjugator. In the dispersion map of the 'random-inverse' configuration, it was also confirmed that the compensation effect of the distorted wavelength division multiplexing signal becomes improved when the magnitude of the RDPS allocated to each fiber span is large.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.179-188
• /
• 2017

The Internet Video Coding (IVC) standard is due to be published by Moving Picture Experts Group (MPEG) for various Internet applications such as internet broadcast streaming. IVC aims at three things fundamentally: 1) forming IVC patents under a free of charge license, 2) reaching comparable compression performance to AVC/H.264 constrained Baseline Profile (cBP), and 3) maintaining computational complexity for feasible implementation of real-time encoding and decoding. MPEG experts have worked diligently on the intellectual property rights issues for IVC, and they reported that IVC already achieved the second goal (compression performance) and even showed comparable performance to even AVC/H.264 High Profile (HP). For the complexity issue, however, there has not been thorough analysis on IVC decoder. In this paper, we analyze the IVC decoder in view of the time complexity by evaluating running time. Through the experimental results, IVC is 3.6 times and 3.1 times more complex than AVC/H.264 cBP under constrained set (CS) 1 and CS2, respectively. Compared to AVC/H.264 HP, IVC is 2.8 times and 2.9 times slower in decoding time under CS1 and CS2, respectively. The most critical tool to be improved for lightweight IVC decoder is motion compensation process containing a resolution-adaptive interpolation filtering process.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.813-820
• /
• 2014

This paper presents design and performance validation of a method for motion compensation using fast steering mirror. First of all, the schematics of the Electro Optical/Infra-Red (EO/IR) and step-stare image gathering system for an aerial reconnaissance are introduced. Because of the steering mirror with low inertia so called Back scan mechanism (BSM), the fast step-stare image gathering technique that is required for taking a high-definition still image will be realized. After then, the BSM hardware includes motors and feedback sensors are introduced. Also, the motion profile for BSM will be designed to compensate roll scan motion of the gimbals. At the end of this paper, designed profile and tracking performance of the EO/IR system with BSM will be validated through experiments.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.405-411
• /
• 1994

Hazardous wastes released into the general environment are of concern to the public and to public health authorities. In response to this concern, the Comprehensive Environmental Response, Compensation, and Liability Act, as amended (commonly called Superfund), was enacted in 1980 to provide a framework for environmental, public health, and legal actions concerning uncontrolled releases of hazardous substances. The Agency for Toxic Substances and Disease Registry (ATSDR) was created by Superfund to address the public health issues of hazardous wastes in the community environment. Two key Agency programs, Public Health Assessments and Toxicological Profiles, are designed to assess the risk to human health of exposures to hazardous substances that migrate from waste sites or through emergency releases (e.g., chemical spills). The Agency's public health assessment is a structured process that permits ATSDR to identify which waste sites or other point sources require traditional public health actions (e.g.. human exposure studies, health studies, registries, health surveillance, health advisories). The ATSDR qualitative public health assessment complements the U.S. Environmental Protection Agency's quantitative risk assessment. For Superfund purposes, both assessments are sitespecific. ATSDR's toxicological profiles are prepared for priority hazardous substances found most frequently at Superfund sites. Each profile presents the current toxicologic and human health effects information about the substance being profiled. Each profile also contains Minimal Risk Levels (MRLs), a type of risk assessment value. This paper covers ATSDR's experience in conducting public health assessments and developing MRLs, and it relates this experience to recommendations on how to improve chemical risk assessments.

• Korean Journal of Psychosomatic Medicine
• /
• v.23 no.1
• /
• pp.12-19
• /
• 2015

Objectives : This study examined the characteristics and differences of PAI(Personality Assessment Inventory) profile between compensation-seeking(CS) and treatment-seeking(TS) patients with traumatic brain injury(TBI) and assessed the clinical meaning of the characteristics and differences of profiles between the two groups. Methods : 36 TBI patients who visited the Wonkwang University Hospital were selected. The patients were categorized as compensation-seeking TBI patients(n=22) and treatment-seeking TBI patients(n=14). The PAI scales and subscales were used to compare differences between two groups. t-verification for each variable and comparison analysis were performed. Results:In validity scales, CS group showed significantly higher NIM scores and lower PIM scores than TS groups. In full scales, CS group showed significantly higher SOM, ANX, ARD, DEP, and SCZ scores than TS group. In subscales, CS group showed significantly higher SOM-S, ANX-A, ARD-P, DEP(-C, A, P), (MAN-I), PAR-H, SCZ(-T, P), BOR(-A, N), and ANT-S scores than TS groups. In supplementary scales, CS group showed significantly higher SUI, NON and AGG-P, and lower RXR scores than TS group. Conclusions:There were significant differences in PAI scales with validity scales, some full and subscales according to compensation seeking status in TBI patients. The CS patients tended to exaggerate their symptoms on PAI, and showed higher scores representing somatic preoccupation and emotional distress. These results show the usefulness of PAI in reflecting the significant psychological differences between two groups.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.10
• /
• pp.31-40
• /
• 2009

As the measurement of strain-gage type cone penetrometer is influenced by the temperature change during penetration, the temperature is a factor producing an error of the cone tip resistance. In this study, the 0.5 mm diameter temperature transducer and 7 mm diameter micro cone penetrometer are manufactured by using FBG sensors to evaluate the effect of temperature on the cone tip resistance. Design concepts include the cone configuration, sensor installation and the temperature compensation process. The test shows that the tip resistance measured by strain gauge is affected by the temperature change. The error of the tip resistance increases with an increase in temperature change, while the temperature effect on the tip resistance of FBG cone is effectively compensated by using FBG temperature transducer. Temperature compensated tip resistance of the strain gauge cone shows the good matched profile with FBG cone which performs real-time temperature compensation during penetration. This study demonstrates that the temperature compensation by using FBG sensor is an effective method to produce the more reliable cone tip resistance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.532-539
• /
• 2018

A position estimation technique is presented for a missile using high-resolution range profiles obtained by three wideband radars. Radar measures a target range using a reflected signal from the surface of a missile. However, it is difficult to obtain the range between the radar and the origin of the missile. For this reason, the interior angle between the moving missile and tracking radar is calculated, and a compensated range between surface of the missile and its origin is added to the tracking range of the radar. Therefore, position estimation of a missile can be achieved by using three total ranges from each radar to the origin of the missile. To verify the position estimation of the missile, electromagnetic numerical analysis software was used to prove the compensated range according to the flight position. Moreover, a wideband radar operating at 500-MHz bandwidth was applied, and its range profile was used for the position estimation of a missile.