• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.117-117
• /
• 2000

This paper presents experimental results for peformance management of a Profibus-FMS network. The performance management alms to maintain a uniform level of network performance at all stations under changing network traffic. The performance management algorithm monitors the performance of individual network stations and commands the stations to change their timer values in order to have comparable performance at all stations. In order to determine the amount of timer change, the algorithm employs a set of fuzzy rules. This algorithm has been evaluated on a Profibus network

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.120-129
• /
• 2001

As many sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation of a remote feedback control system via Profibus-DP net work for real-time distributed control More specifically, the effect of the network delay on the control performance evaluated on Profibus-DP testbed. Also, the traditional PID gain tuning methods are used to demonstrate the feasibility of the remote feedback control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.903-910
• /
• 2000

In this paper, we describe a slave chip based on the Profibus-DP protocol and a system board to verify the developed slave chip. The Profibus-DP protocol is designed using VHDL and implemented on FPGA. The system board adopting the developed FPGA is designed FPGA is designed in which the firmware is implemented on Intel 8051 by using C language. Among the Profibus-DP protocols, low level layers from the physical layer to the data link layer is implemented in the form of hardware that we are able to greatly reduce the CPU load in processing protocols, and then higher layers could be processed by software. These technologies result in an IP to make terminal devices in the distributed control systems. Therefore, many digital logics as well as communication logics can be implemented onto SOC(System On a Chip) and it could be applied to various fieldbus-related areas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.116-120
• /
• 2011

In this paper, we have designed and implemented the integrated protocol gateway for the integration of CAN and Profibus networks. To do that, we used the Switched Ethernet as Backbone network, and each fieldbus network is connected by CAN/Ethernet or Profibus/Ethernet gateway, and each gateway perform the translation between fieldbus and Ethernet frames. Futhermore, we realized the real-time features in the environment of the Switched Ethernet by applying the distributed hard real-time scheduling algorithm among each gateways. To implement tht CAN/Ethernet and Profibus/Ethernet gateways, we used the Linux of kernel 2.6.31.12 real-time patched version(PREEMTED_RT), and we could verify successful message translation and real-time features through real implementation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.4
• /
• pp.326-333
• /
• 2001

This paper focuses on a method to connect mobile devices such as mobile robot. Automated Guided Vehicle (AGV) and Unmanned Container Transporter(UCT) to a fieldbus. In this paper, the IEEE 802.11 wireless LAN is used to extend a Profibus network for the mobile devices. In order to integrate these two networks, a gateway is developed using two threads and an internal buffer. Furthermore, a polling algorithm is applied at the gateway in order to satisfy real-time requirements on data communication, Finally, the performance measures such as data latency and throughput are experimentally evaluated on a wirelessly-extended Profibus network. The results shows the feasibility of the wireless extension of Profilbus for various mobile device.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.676-679
• /
• 1997

Networking for manufacturing is gaining importance as a nerve system of computer-integrated manufacturing(CIM). Among the various network types, the most inexpensive type called fieldbus is specifically aimed to interconnect simple devices such as sensors and actuators. For this purpose, there are several choices of the protocol such as Profibus, FIP, Foundation Fieldbus, and IEC/ISA fieldbus. This paper presents the simulation results of Profibus and FIP. Both protocols has been simulated in order to evaluate the performance such as transmission delay and throughput under different protocol parameter setting and traffic conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.97-100
• /
• 1997

Fieldbuses are used as the lowest level communication network for real-time communication in factory automation and process control systems. Data generated from field devices can be divided into three categories: sporadic real-time, periodic real-time and non real-time data. Since these data share one fieldbus network medium, it needs a method that allocate the limited bandwidth of fieldbus network to the sporadic real-time, periodic real-time and non real-time traffic. This paper introduces an implementation method of bandwidth allocation scheme introduced in [51 on PROFIBUS. Using the modified PROFIBUS FDL(Fieldbus Data Link layer), the bandwidth allocation scheme introduced in [51 is verified by the experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1020-1023
• /
• 1996

Fieldbus provides real-time data communication among field devices in the process control and manufacturing automation systems. This paper presents an implementation method of Profibus in the experimental model of manufacturing automation system. The manufacturing automation system considered in this paper consists of robots, NC machines, sensors, conveyers and PCs. The application task programs are developed on the basis of FMS/FMA7 communication services which are provided by Profibus application layer. The communication and application programs are developed in the real-time environment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.1-7
• /
• 2016

The cutting processes used for monitoring engineering includes analysis and feedback about strange conditions, tools collision and tools wear in real time, for improving the working ratio of equipment and productivity. In this study, we proposed monitoring using profibus to increase the reliability as the most important factor for cutting monitoring. The profibus can increase the reliability of cutting monitoring for cutting torque of a main spindle motor and a feed motors through PLC-based interface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.470-473
• /
• 2002

Most networks for automation are tuned to an expected traffic at their design stage. During their actual operations, however, the networks experience considerable changes in traffic from time to time. These traffic changes caused by common events like machine failure and production schedule change may adversely affect the network performance and, in turn, the performance of the connected devices. This paper presents communication delay model for Profibus token passing protocol, and introduces TTR selection methods to maintain a uniform level of network performance at all stations under changing network traffic.