• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.505-511
• /
• 1998

Production technologies for aluminum rolling stocks are mainly related to welding of aluminum alloys. Automatic welding of extrusion profiles and control of welding deformations are the important contents of the production technologies. Another production technology other than welding is the technique for surface treatment of aluminum carbody. In this paper, problems caused during construction of the test carbody are described and the remedies for the problems are suggested. The accumulated experiences and systematic data will be helpful for the mass production of aluminum rolling stocks in the furture.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.171-178
• /
• 2013

Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers' manual data input are expected to be solved; safety can also be improved by enhancing workers' attention to work by minimizing workers' injuries and disruption.

• Fisheries and Aquatic Sciences
• /
• v.25 no.10
• /
• pp.525-536
• /
• 2022

Photosynthetic bacteria (PSB) attract considerable interest as useful microorganisms; nevertheless, a generalized culture technique has not been previously reported owing to difficulty in their cultivation. Therefore, a simple culture technique suitable for public use was investigated. Among the PSB tested, the strain Rhodobacter azotoformans EBN-7 was the most suitable for scale-up production because it showed the highest specific growth rate (0.20 h^-1) on basal medium. In scale-up cultivation (500 L), R. azotoformans EBN-7 showed 4.50 × 10¹⁰ colony-forming units mL^-1 (number of viable cells), dry cell weight of 26.8 g/L, and a specific growth rate of 0.15 h^-1. Cultivation using this final culture broth (as seed culture) in a 15 L simple reactor was successful, with maintenance of cell activity evident. For use as seed culture, the maximum allowable preservation period of R. azotoformans EBN-7 at 4℃ was 3 months. When R. azotoformans EBN-7 cultivated in a simple technique was applied to shrimp aquaculture water, NH₄⁺-N was reduced from 0.61 mg/L to 0.24 mg/L (by 60.7%) in 4 days in comparison with the control. Thus, this simple culture technique using R. azotoformans EBN-7 has the potential for a good removal efficiency of NH₄⁺-N, making seed culture easier and suitable for public use.

• Archives of design research
• /
• v.14
• /
• pp.297-318
• /
• 1996

In a specialized modern society and/or visual communication technique seems to be preferable to the traditional one-way communication technique which resorts to reading materials. P.R materials currently produced by various levels of Korean government administrative bodies seem to outdated and inefficient both in their contents and in graphic technique employed. In this paper we argue that the problems of the communication technique used by Korean government result mainly from the ambiguous nature of the message of P.R materials and the inability to differentiate the contents of P.R materials according to the target audience. We recommend various changes to the current government communication program and emphasize the importance of graphic communication technique for the production of more effective and professional communication materials

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1214-1219
• /
• 2018

A variety of VR contents are being introduced as of 2017. VR contents are concentrated in the genre of games and interactive because of the difficulty of $360^{\circ}$ shooting production environment. Live action $360^{\circ}$ VR content has many problems due to the difficulty of the production environment. In this paper, a three - dimensional information value is generated in binocular disparity of a real image by using a re-light technique based on real image data. The generated 3D information values are combined with a technique of converting the depth information into a depth map and a re-light technique by installing virtual lighting on the surface formed in the 3D space. In order to solve the problem of lighting exposure, we apply the technique of re-lighting to the VR production pipeline by comparing and analyzing the result image of actual image and virtual image data.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.1
• /
• pp.51-61
• /
• 2016

In order to provide recommendations on the most useful forage species to smallholder farmers, eleven grass and eleven legume forages grown in Abomey-Calavi in Republic of Benin were investigated for nutritive value (i.e. chemical composition and energy content) and fermentation characteristics (i.e. gas and volatile fatty acid production, organic matter degradability). The in vitro gas production technique was used, incubating the forages for 120 h under anaerobic condition with buffalo rumen fluid. Compared to legume, tropical grass forages showed lower energy (8.07 vs 10.57 MJ/kg dry matter [DM]) and crude protein level (16.10% vs 19.91% DM) and higher cell wall content (neutral detergent fiber: 63.8% vs 40.45% DM), respectively. In grass forages, the chemical composition showed a quite high crude protein content; the in vitro degradability was slightly lower than the range of tropical pasture. The woody legumes were richer in protein and energy and lower in structural carbohydrates than herbaceous plants, however, their in vitro results are influenced by the presence of complex compounds (i.e. tannins). Significant correlations were found between chemical composition and in vitro fermentation characteristics. The in vitro gas production method appears to be a suitable technique for the evaluation of the nutritive value of forages in developing countries.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1718-1723
• /
• 1991

The determination of a production sequence is an important problem in a batch process operation. In this paper a new algorithm for a near optimal production sequence of N product in an M unit serial multiproduct batch process is proposed. The basic principle is the same as that of Johnson's algorithm for two-unit UIS system. Test results on a number of selected examples exhibit the superiority over previously reported results. In addition, a tabulation technique is presented to calculate the makespan of a given sequence of production for all processing units under UIS mode.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.259-262
• /
• 1995

In this paper, a model of an asymptotically reliable serial production line with quailty control devices is introduced and analyzed. By an asymptotic technique and Taylor series expansion, its average production rate is approximated in a closed form. The results are applied to a case study of a surface mount system.

• Journal of Conservation Science
• /
• v.23
• /
• pp.53-65
• /
• 2008

This research investigated and analyzed the structure and material feature of the wall behind the Buddha of main temple in An-dong Bongjeonsa through applying the natural scientific method, in order to closely examine its production technique. As a result of the research, the structural and material feature of the wall has been clarified and its production technique applied to the structure has been understood in a comprehensive sense. The target sample basically adopted the two-layer wall system, which showed a symmetric structure to the center made with the wooden material, and is estimated to follow the structural tendency of a general wall which is organized with the first layer, the midterm layer, and the painting wall layer. Each layer formed by the production procedure showed difference in the material and production method according to its characteristics and roles. And it was identified that, in general, the higher a layer lies, the finer grains it has. Combination of the main materials and the additives, used for the wall forming, was presumed to contribute to improving its durability and conservativeness. Also interaction between the materials generating the conservativeness and the producer's technical effect seemed to fortify solidity of the wall.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.265-270
• /
• 2018

Up-to-date artificial insemination (AI) using frozen sperm consider as the most widely using technology for improvement of Korean Native Cow (Hanwoo) embryo production. However, it is time consuming, required at least 15~20 years to make more than 6 generations, and their offspring number is limited. To overcome such limitations, superovulation and in vitro fertilization have been developed. For superovulation, the number of produced embryos are not enough for commercialization and donor cows need rest period. This led to use of slaughterhouse ovary for in vitro fertilization, but it is impossible to repeat the collection from the same individual and it only can improve the genetic merits of offspring for one generation. Production of embryos using Ovum Pick-Up (OPU) technique, where oocytes can be repeatedly collected from living elite donor, might overcome these limitations. In this study, we investigated the possibility of using OPU technique from donors at different age and different session periods for mass-embryo-production. Oocytes were collected from 26 donor cows twice per week, 3 - 4 months per year, between 2013 and 2016. Results showed that, the average number of embryo produced in first year used donor was significantly higher than that in second year used donor ($3.89{\pm}2.85$ vs $3.29{\pm}2.70$), however, there was no significant difference between third year used donor ($3.51{\pm}3.32$) and other groups. Taken together, our data showed that repeated using of donor up to three years is possible for in vitro embryo mass-production. Moreover, OPU can be used as suitable embryo producing technique for livestock breed improvement.