• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1141-1149
• /
• 2018

Objective: Cluster of differentiation 4 protein (CD4) gene is an important immune related gene which plays a significant role in T cell development and host resistance during viral infection. Methods: In order to unravel the relationship of CpG island methylation level of CD4 gene with its gene expression and T lymphocyte subpopulation traits, we used one typical Chinese indigenous breed (Dapulian, DP) and one commercial breed (Landrace), then predicted the CpG island of CD4 gene, determined the methylation status of CpG sites by bisulfite sequencing polymerase chain reaction (BSP), and carried out the correlation analyses of methylation frequencies of CpG sites with mRNA expression and T lymphocyte subpopulation traits. Results: There was one CpG island predicted in the upstream -2 kb region and exon one of porcine CD4 gene, which located 333 bp upstream from the start site of gene and contained nine CpG sites. The correlation analysis results indicated that the methylation frequency of CpG_2 significantly correlated with CD4 mRNA expression in the DP and Landrace combined population, though it did not reach significance level in DP and Landrace separately. Additionally, 15 potential binding transcription factors (TFs) were predicted within the CpG island, and one of them (Jumonji) contained CpG_2 site, suggesting that it may influence the CD4 gene expression through the potential binding TFs. We also found methylation frequency of CpG_2 negatively correlated with T lymphocyte subpopulation traits CD4+CD8-CD3-, CD4-CD8+CD3- and CD4+/CD8+, and positively correlated with CD4-CD8+CD3+ and CD4+CD8+CD3+ (for all correlation, p<0.01) in DP and Landrace combined population. Thus, the CpG_2 was a critical methylation site for porcine CD4 gene expression and T lymphocyte subpopulation traits. Conclusion: We speculated that increased methylation frequency of CpG_2 may lead to the decreased expression of CD4, which may have some kind of influence on T lymphocyte subpopulation traits and the immunity of DP population.

• Trans-
• /
• v.2
• /
• pp.75-94
• /
• 2017

The film director is the responsible for artistic quality of the film. In Hollywood, the director considered as a technician only visualizes the given scenario. In the 1950s, young critics of the Cahiers du cinéma, who were at the center of Nouvelle Vague, re-qualified some Hollywood directors, for example Alfred Hitchcock, Howard Hawks and John Ford. They are considered "auteurs(authors)" because their films have their own styles. In France, the word "auteur-directoir" is often used in the film production. It refers to the person who writes the original screenplay of a movie. Auteur's legal definition of copyright is set out in Article L.111-1 of the Intellectual Property Code: "the auteur of a work of the mind enjoys the work by reason only of its creation, of an exclusive intangible property right and opposable to all. On the other hand, in the definition of producer, it is the natural or legal person who takes the initiative and responsibility for the realization of the work according to Article L. 132-23 of the same code. We study here the competence and responsibility of the French director as an "auteur" by consulting the two types of contract: director-technician and author-director. We rant to offer a reflection on the position of the film director and the relationship between the director and the producer.

• The International Journal of Costume Culture
• /
• v.4 no.1
• /
• pp.25-33
• /
• 2001

This study is to analyze Korean-Chinese women's Costume in Yabian with factors such as reform opening-up, economic growth, change of social values, development of technology, more education opportunities and influence of mass media. It divides the 1990's into two halves. Photos, interview, observation and relevant literature were used for this study. Even though economy grew rapidly, they needed to purchase daily goods other than clothes. In a way that they preferred practicality, it showed somewhat it was still developing. The trend in the first half of the 1990's was characterized : first, Synthetic or artificial fibers and ready-made suits were popular ; second, there still remained the men's style ; third, they wore Tanrikoo(彈力袴), Tisingkoo(體型袴), Jiaotakoo(脚袴) because of its properties of activeness and comfort ; fourth, shoulders looked ore prominent with pads as they were used in Chungsanfoo(中山服) ; fifth, clothes in grey and dark blue was in fashion ; sixth, they wore hand-made knit vests and sweaters and often mountain-climbing gears for its light and warm quality ; seventh, along with opening-up, various materials and colorful clothes were in style, which satisfied women's desire for beauty. They decorated Hanbok(韓服), using sleeves with colors, golden ornaments, flower patterns embroidery, materials of different color in collar and tie and dyes of sleeves and skirts. In the first half of the 1990's when the opening-up was beginning, there were diverse styles and colors in fashion, yet not close to good quality. As the economy grew, the second half of the 1990's was characterized by good palate, individuality, favouritism on foreign goods, rapid change of fashion. For instance, fur coat and woolen fabric were favored. Economic growth led to abundance of cloth, dyes and decorative materials. In addition, people possessed more clothing and it was possible for them to wear both Hanbok and wedding dress in wedding ceremony. People placed their standards on competency and financial ability rather than ideology. Worship disappeared and individuality arose. Therefore, apparel functioned not only as protection but as suits with aesthetic purpose. This resulted in introduction of bold style, imitation of western countries and extension of use of Hanbok. With the help of mass media, transportation, telecommunication, contact with Korean company and civilians, Korean and western cultures, through Korea, were accepted. Change in structure of economic status caused excessive spending and more educational opportunities that enabled people to accept foreign culture quickly. Values moved onto new, beautiful and better characteristics. it was possible to have suits ready-made due to improvement of mass production and cotten, wool, linen, silk became popular owing to technology. New technology, the bases of mass consumption, increased possession of clothing and accelerated change of fashion. In summary, women's Costume in Yanbian were affected by the factors in economy, politics, culture contact as well as change of society and technology.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.143-165
• /
• 2016

The amount of greenhouse gas emission reduction based on INDCs (Intended Nationally Determined Contributions) submitted to UN by each party is not sufficient to achieve the Paris Agreement's aim to "hold the increase in the global average temperature to well below $2^{\circ}C$ above pre-industrial levels and to pursue efforts to limit the temperature increase to $1.5^{\circ}C$" which was determined in the $21^{st}$ Conference of the Parties to the UNFCCC (COP 21). Accordingly, the emission reduction target of each party will be revised for the $2^{\circ}C$ goal. Among the several options to reduce the carbon emission, CCS (Carbon Capture and Storage) is a key option to curb $CO_2$ emissions from large emission sources such as fossil-based power plants, cement plants, and steel production plants. A large scale CCS demonstration projects utilizing $1^{st}$ generation $CO_2$ capture technologies are under way around the world. It is anticipated, however, that the deployment of those $1^{st}$ generation $CO_2$ capture technologies in great numbers without government support will be difficult due to the high capture cost and considerable increase of cost of electricity. To reduce the carbon capture cost, $2^{nd}$ and $3^{rd}$ generation technologies are under development in a pilot or a bench scale. In this paper, current status of large scale CCS demonstration projects and the $2^{nd}$ and $3^{rd}$ generation capture technologies are summarized. Novel capture technologies on wet scrubbing, dry sorbent, and oxygen combustion are explained in detail for all capture areas: post-combustion capture, pre-combustion capture, and new combustion technologies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.612-621
• /
• 2011

The influences of inland pollution sources because of rainfall events on the bacteriological water quality in Geoje Bay, a major shellfish production area in Korea, were investigated. The sanitary status of sea water and shellfish after rainfall events was also evaluated. The flow rates of 13 streams around Geoje Bay showed 6 to 7-fold increases after 15 to 21 mm of rainfall. Peak pollution was observed in the Naegan Stream, the Gandeok Stream and the Seojeong Stream. The calculated impact area of inland pollution sources was 3.1 $km^2$ immediately after 15 mm of rainfall and expanded to 3.5 $km^2$ after 24 hours. These calculations of impacted area matched results from fecal coliform analyses with sea water. The distance between the major pollution source in the bay (the Gandeok Stream) and the station with the worst bacteriological water quality immediately after 15 mm of rainfall, which was below the Korean standard, was 0.8 km in a straight line; this distance increased to 2.0 km after a period of 24 hours. The area impacted by inland pollution sources after a 15 mm rainfall event was wider than after a 21 mm rainfall. Although the flow rate from inland pollution sources was higher, the concentration of fecal coliform in the discharged water was lower after higher rainfall events. These observations corresponded with the results of fecal coliform analyses with sea water samples. According to the evaluation of the influences of inland pollution sources and fecal coliform analyses on sea water and shellfish samples in Geoje Bay, pollutants from inland sources did not reach the boundary line of the shellfish growing area after rainfall events of 15 or 22 mm. The bacteriological water quality of the shellfish growing area in Geoje Bay met the Korean standard and US NSSP requirements for approved shellfish growing areas.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.1-17
• /
• 2003

Populus species have been as a model species in tree breeding and we have enormous varieties resulting from the poplar breeding because of their fast growth performance and short rotation age. New varieties developed in Korea are common italian poplar(P euramericana, I-214, I-476), P euramericana“Eco 28”(Italian poplar No.1) and p. deltoides“Lux”(Italian poplar No.2), which were introduced from foreign countries. As hybrid polars, Hyun-Sasi(p. alba ${\times}$ P. glandulosa No.1, No.2, No.3, No4.), P. nigra x P. maximowiczii and P. koreana x P. nigra val. italica, were developed, and P. davidiana was selected as the result of selection breeding The total plantation areas covered with the new varieties are 935,162ha that include 745,773ha of P. euramericana, 184,636ha of P. alba x P. glandulosa, and other new varieties are 4,735ha. The new poplars are contributed to increase farmer's income as well as bare land tree-planting in Korea. The technologies associated with the poplar species were developed, such as the determination of optimum site for new the poplar species, the crossing method between incompatible poplar species, and the vegetative mass propagation. In the future, poplar species will be considered for phytoremediation species at contaminated areas such as landfill sites or with lives stock's waste water as well as wood production, a shade tree like road-side tree and public park tree.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.2
• /
• pp.47-53
• /
• 2014

Three kinds of crystalline silicon have been used for the solar cell grade. First of all, single crystalline silicon is the main subject to enhance the production yield. Most of the efforts are focused on the control of the melt-crystal interface shape affected by the crystal-crucible rotation rate. The main subject in the multi-crystalline silicon ingot is the contamination control. Faster Ar gas flow above the melt surface will lower the carbon contamination in the crystal. And also, twin boundary electrically inactive is found to be more effective than grain boundary for the improvement of the MCLT. In the case of mono-like silicon material, propagation of the multi-crystalline silicon growing from the inner side crucible is the problem lowering the portion of the single crystalline part at the center of the ingot. Crystal growing apparatus giving higher cooling rate at the bottom and lower cooling rate at the side crucible was suggested as the optimum solution obtaining higher quality of the mono-like silicon ingot. Proper application of the seeds at the bottom of the crucible would be one of the solutions.

• Journal of Korean Society of Archives and Records Management
• /
• v.20 no.1
• /
• pp.115-137
• /
• 2020

This study aims to examine the limitations of status that describe archives based on the Archival rules, and to propose a new method using the Records in Context - Conceptual model (RiC-CM) as a solution. Given this, the study conducted literature reviews and case studies. The solutions based on RiC-CM and its effects on the limitations of the existing environment are as follows. First, RiC-CM can describe multiple provenances about archives. This can be solved by defining individual records and provenances as "entity" and expressing their associations as relationships. The interrelation of entities alone can more accurately represent the information of provenances associated with a particular archive, making it easier to identify the overall context that makes records. Second, RiC-CM can link related files. Those that belong to a specific records group (fonds) can be resolved by assigning them to individual entities and making interrelation according to the context that makes records. This method makes it possible to serve information about the context that makes records. From the user's point of view, more options are available for searching records. Third, RiC-CM can link all relevant producer-made records related to a specific production organization. If organizations are related to each other, they can be defined as "entity," and their relationship can be expressed as "associated with." It helps to comprehensively examine the context of provenances. The findings of this study are expected to be used as a basis for future research on RiC-CM, in response to the paradigm shift for electronic records management systems.

• Journal of Korean Society of Archives and Records Management
• /
• v.18 no.3
• /
• pp.145-163
• /
• 2018

The act was designed to identify the introductory cases of the use of quick response (QR) codes in records management by public institutions and propose measures to enhance users' satisfaction with their work. This study looked at the definition of the QR codes and the user services that can be provided by the records depository and reviewed the introduction cases using the codes. The reason QR codes are used by records depositors is that public institutions currently have a single-person system that specializes in records management. With the number of employees and the number of records becoming more extensive, explaining the contents of all tasks accurately as well as other professional contents to employees who lack understanding of the records management life cycle is becoming more difficult. The introductory cases were divided into information on how to register nonelectronic records, information on location and history of important records and administrative museum, and education on standard records management. The research was conducted by dividing the research team's "Records Management Guide" (QR code status) into experimental groups and control groups for officials of the Busan Metropolitan Government. There were significant differences in the level of satisfaction with records management guidance depending on whether or not QR codes were used. When the first and second surveys were compared in December 2017 and March 2018, the results of the first survey averaged 2.94, but the second survey showed high results at 3.75 and was statistically significant. This can be said to be more satisfactory by introducing QR codes than guidance provided by existing type. Although this research examines introductory cases of records management by public institutions using QR codes and user satisfaction, future tasks are to be applied to Records Management System and document production systems so that completion can be improved.

• Journal of Forest and Environmental Science
• /
• v.23 no.2
• /
• pp.109-118
• /
• 2007

This study was conducted to provide the fundamental data of the policy plan for the security of forestry labour and the revitalization of forestry mechanization by analysing the status of forestry labor and the training plan. In forestry, the total number of employer and the labour cost have slightly increased annually, but the number of employer for timber harvesting has decreased. Therefore, the organization of expert forestry mechanization unit and the training of operator will be necessary. The number and person of forest management unit, the working days of the year and income have increased in Korea. However, the working days per month of forest management unit were only 15 days, which are only 180 days per year. In the results of the calculated number and person of forest management unit for the Korean forest tending volumes, about 349 forest management units are required. In case of adjusting 12 persons per 1 unit, 4,185 persons are required. In calculated results of the optimum forestry mechanization unit and member's number by the adjusting of tower yarder harvesting system for annual timber harvesting production volume, it was known to necessary the 250 forestry mechanization unit and the 1,250 members which are calculated at 5 persons per 1 group.