• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.831-840
• /
• 1992

This paper presents an efficient short-term generation scheduling method using a rule-based expert/consulting system approach to assist electric energy system operators and planners. The expert system approach is applied to improve the Dynamic Programming(DP) based generation scheduling algorithm. In the selection procedure of the feasible combinations of generating units at each stage, automatic consulting on the manipulation of several constraints such as the minimum up time, the minimum down time and the maximum running time constraints of generating units will be performed by the expert/consulting system. In order to maximize the solution feasibility, the aforementioned constraints are controlled by a rule-based expert system, that is, instead of imposing penalty cost to those constraint violated combinations, which sometimes may become the very reason of no existing solution, several constraints will be manipulated within their flexibilities using the rules and facts that are established by domain experts. In this paper, for the purpose of implementing the consulting of several constraints during the dynamic process of generation scheduling, an expert system named STGSCS is developed. As a building tool of the expert system, C Language Integrated Production System(CLIPS) is used. The effectiveness of the proposed algorithm has been demonstrated by applying it to a model electric energy system.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.106-112
• /
• 2000

Cognition and control of grinding trouble occurring during the grinding process are classified into a quantitative knowledge which depends on experimental data and qualitative knowledge which relies on skiful engineers. grinding operations include a large number of functional parameters since there are several ways of coping with ginding trouble. One is the qualitative method which depends on empirical knowledge utilizing the skilful experts from the workshop the other is the quantitative method which utilizes the experimental data obtained by sensor. But they are all difficult to accomplish from the grinding trouble-shooting system The reason is that grinding troubles are not accomplish from the grinding trouble-shooting system,. The rason is that grinding troubles are not easily controlled in the quantitative method and therefore trouble-shooting has mainly relied on the knoledge of skiful engineers. Thus there is an important issue of how a grinding touble-shooting system can be designed and what knowledge is utilized among the large amount of grinding trouble information. In this paper basic strategy to develop the grinding database by taking rule-based model which is strongly depended upon experience and intuition is described.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.336-343
• /
• 2009

Companies often use database for performing task more efficiently and data mining for marketing and production efficiency through analyzing of the stored database. The use of the knowledge through the data mining maintains and provides a direction of development for the company. It could be as an additional competitive power for the company when decision making is necessary. This study is designing a model that predicts a rating of existing customer and consumption pattern with using actual data of the manufacturer and data mining methodology. The objective of this model is to improve profits for the company and brand value through connecting the marketing with identifying the customer's rating and consumer behavior.

• Journal of the Korean housing association
• /
• v.27 no.1
• /
• pp.63-70
• /
• 2016

Domestic apartment housing has been designed in accordance with the new housing supply-driven policies for a long time. As a result, its design, material production, construction, maintenance and remodeling process, rather than being systematically performed, were individually approached to cause insufficient linkage between technologies. For these problems and the supply of long life housing, active research on long life housing has been conducted in Korea since 2005. However, the existing research on long life housing has been focused on a single item with no connection made between infill systems, and no overall interface rule, resulting in no activation of the business. In this study, for the supply and activation of long life housing, we aim to analyze the problems of existing long life housing to set up its matching standards for infill systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.120.6-120
• /
• 2002

This paper presents an application of rule based expert system to GDS. Expert system is a computer-based system that uses knowledge, facts, and reasoning techniques to solve problems that normally require the abilities of human experts. Expert system can be classified as synthesis expert system, classification expert system or combination of these. The Expert system of GDS belongs to the synthesis type of expert system. GDS is a graphic design environment that automates complex and time consuming processes in the design phase of the grating production. There are methodical procedures in the design phase of gratings and each process needs the know-how of a skillful designer. User has to know...

• Journal of the Korean Operations Research and Management Science Society
• /
• v.18 no.2
• /
• pp.1-22
• /
• 1993

This paper deals with the problem of mixed model assembly line balancing. In mixed model assembly lines, tsks should be assigned to stations in such a manner that all stations have approximately the same amount of work on a production cycle basis. Further in balancing assembly lines, the related tasks, the performing task side and the team tasks should be considered to improve work methods, to give more job satisfaction to workers, and to allow greater flexibility in the design of assembly lines. In this paper, the heuristic dispatch assignment rule is developed to assign evenly tasks of each model to all stations. The heuristic method based on the assignment rule developed is presented for mixed model assembly line balancing with the considerations of the related tasks, the performing task side, and the team tasks. The proposed method is analyzed, and compared with other methods for line balancing.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.129-132
• /
• 1990

This paper reports an expert system for coordination of protective relays in the high voltage transmission system. The proposed system consists of five modules and has adopted the frame and production rule representations achieving the efficient data storage and knowledgebases. It has an interface to the fault program PSS/E and has reduced the data retrival time by implementing the local database containg only the minimum information for the process. Different relay parameters and output formats of the setting results can be easily incorporated owing to the rule-based structure. Graphics-based output helps understanding of the process and enhances the practical power.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.6
• /
• pp.187-196
• /
• 2001

In this study, by using the natural language processing of the field of artificial intelligence, automated index was performed. And then, the Natural Language Processing Interface for knowledge representation(NALPI) has been developed. Furthermore, the DEsign KnOwledge DataBase(DEKODB) has been also developed, which is designed to interlock the knowledge base. The DEKODB processes both the documented design-data, like a concrete standard specification, and the design knowledge from an expert. The DEKODB is also simulates the design space of structures accordance with the production rule, and thus it is determined that DEKODB can be used as a engine to retrieve new knowledge and to implement knowledge base that is necessary to the development of automatic design system. The application field of the system, which has been developed in this study, can be expanded by supplement of the design knowledge at DEKODB and developing dictionaries for foreign languages. Furthermore, the perfect automation at the data accumulation and development of the automatic rule generator should benefit the unified design automation.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.228-233
• /
• 1997

An efficient corner matching algorithm is developed to minimize the amount of calculation. To reduce the amount of calculation, all available information from a corner detector is used to make model. This information has uncertainties due to discretization noise and geometric distortion, and this is represented by fuzzy rule base which can represent and handle the uncertainties. Form fuzzy inference procedure, a matched segment list is extracted, and resulted segment list is used to calculate the transformation between object of model and scene. To reduce the false hypotheses, a vote and re-vote method is developed. Also an auto tuning scheme of the fuzzy rule base is developed to find out the uncertainties of features from recognized results automatically. To show the effectiveness of the developed algorithm, experiments are conducted for images of real electronic components.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.13-21
• /
• 1997

This paper describes how to represent varations of feature parameters to improve recognition of continuous speech. For speech recognition, feature parameters, which are formant frequencies, pitches, logarithmic energies and zero crossing retes are used in general. But, their values and variations depend on speakers, for example disparities between man and woman, and on their age. It is difficult to decide a priority the value of the variation width. Hence, we try to represent this variation by introducing fuzziness and recognize a continuous speech by fuzzy inference using fuzzy production rules.