• 한국임상수의학회지
• /
• 제13권2호
• /
• pp.149-152
• /
• 1996

This study was carried out to evaluate the efficiency of production of cloned embryos by nuclear translatation (NT) when using 4-cell to compact morula stage embryos as nuclear donor. In micromanitulation and electrofusion of blastomeres from 4-cell to morula stage embryos, the successful injection rate was higher with late stage blastomeres, on the contrary the fusion rate was lower. The in vitro developmental rate of NT embryos was not significantly different between cell-stages of donor blastomeres. Although the overall rate of production of cloned embryos with 4-cell. 8-cell, early and late morula stage embryos was 14.0, 18.0, 15.3 and 14.1%, respectively, the mean number of blastocysts produced with a donor embryo was the most (4.51) with the compact morulae. Therefore, it can be suggested that the embryos at thelate stage is more beneficial for the mulciple production of cloned embryos, If the late stage blastomeres have maintained their totipotency to produce intact offspring.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.115-119
• /
• 2011

To help the corporations ensure more efficient production management, the Enterprise Resource Planning (ERP) system has been introduced in operation, together with a variety of approaches to make improvements in terms of quality and productivity issues. Yet, with the different types of ERP systems in operation, many companies are going through many difficulties not only in having greatly reduced work efficiency but also in making prompt decisions from the entire group-based integrated information. In this study, the analysis was made on their own ERP systems and working processes operated by a company running the multiple number of productions from the domestic and the overseas suppliers, in order to support their interacted work flow regarding their products and help improve the work efficiency by establishing standardized ERP system. Through this, it is expected to ensure more competitive system in operation by securing the flexibility in the production as well as efficient resource distribution under the corporate context of cost reduction and quality improvement.

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.377-385
• /
• 2015

This paper presents a thermodynamic performance analysis of regenerative organic Rankine cycle (ORC) using turbine bleeding to utilize low-grade finite thermal energy. Refrigerant R245fa was selected as the working fluid. Special attention is paid to the effects of the turbine bleeding pressure and the turbine bleed fraction on the thermodynamic performance of the system such as net power production and thermal efficiency. Results show that the thermal efficiency has an optimum value with respect to the turbine bleeding pressure and the net power production is lower than the basic ORC while the thermal efficiency is higher.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2531-2533
• /
• 2001

This paper describes a low noise and high efficiency analog-digital switching mixed mode battery charger for production facilities of Li-Ion batteries. The requirements for battery chargers for production facilities are very strict. The accuracy of output voltage and output current should be below 0.1% with very low ripple current. Therefore analog type linear regulators are widely used for battery charger in spite of their inefficiency and bulkiness. We combined linear regulator as a voltage source with digital switching converter as a dependent current source. Low current ripple and high accuracy are obtained by linear regulator while high efficiency is achieved by digital switching converter. Experimental results show that proposed method has 0.1% ripple and 90% efficiency at an output current of 1A for a battery voltage of 4V.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2000년도 학술발표논문집
• /
• pp.3-16
• /
• 2000

Protection agriculture is the essential choice for human to increase the efficiency of limited crop production area under harsh and changeable weather boundary conditions, extend growing season, maximize the crop yields, and then increase the sustainable income of the grower. The investment costs far greenhouses as well as labor and energy costs are much higher than for conventional plant production systems, so these can only be balanced by better crop yields, higher labor productivity, and higher energy efficiency. (omitted)

• 한국복식학회:학술대회논문집
• /
• 한국복식학회 2001년도 19th International Costume Association Congress
• /
• pp.50-52
• /
• 2001

The main purpose of this study is to research ways for waste reduction in manufacturing, materials regeneration and clean production in apparel manufacturing in Taiwan, in order to achieve 3E: Efficiency, Economy and Environmental Protection. Specifically, this study hopes to address the following three areas: (1) To study the processing technologies which can turn apparel wastes to resources (2) To increase the efficiency in the use of energy and resources in apparel production (3) To establish a system for improving the recovery from unwanted apparel in Taiwan, in order to improve environmental protection and to reduce pollution.

• KSBB Journal
• /
• 제6권2호
• /
• pp.129-133
• /
• 1991

This study is to investigate the kinetics of anaerobic process, the effect of mass transfer on process, and the characteristics of the conventional anaerobic bioreactor, and develop new high efficiency bioreactor. In the new bioreactor wastewater containing highly concentrated organic materials, was treated without diluting wastewater. In this experiment the high COD removal rate (about 88%) and gas production(about 200l/d) was showed with short residence time(1.5 day). This performance is about 10 times as large as the conventional reactor.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.40-48
• /
• 2009

In this article, scheduling of a casting sequence is studied in a casting foundry which must deliver products according to the Just-in-time(JIT) production policy of a customer. When a foundry manufactures a variety of casts with an identical alloy simultaneously, it frequently faces the task of production scheduling. An optimal casting schedule should be emphasized in order to maximize the production rate and raw material efficiency under the constraints of limited resources; melting furnaces and operation time for a casting machine. To solve this practical problem-fulfilling the objectives of casting the assigned mixed orders for the highest raw material efficiency in a way specified by the customer's JIT schedule, we implement simple integer programming. A simulation to solve a real production problem in a typical casting plant proves that the proposed method provides a feasible solution with a high accuracy for a complex, multi-variable and multi-constraint optimization problem. Employing this simple methodology, a casting foundry having an automated casting machine can produce a mixed order of casts with a maximum furnace utilization within the due date, and provide them according to their customer's JIT inventory policy.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.641-648
• /
• 2011

KEPRI (KEPCO Research Institute) designed and operated the lab-scale high temperature electrolysis (HTE) system for hydrogen production with $10{\times}10cm^2$ 5-cell stack at $750^{\circ}C$. The electrolysis cell consists of Ni-YSZ steam/hydrogen electrode, YSZ electrolyte and LSCF based perovskite as air side electrode. The active area of one cell is 92.16 $cm^2$. The hydrogen production system was operated for 2664 hours and the performance of electrolysis stack was measured by means of current variation with from 6 A to 28 A. The maximum hydrogen production rate and current efficiency was 47.33 NL/hr and 80.90% at 28 A, respectively. As the applied current increased, hydrogen production rate, current efficiency and the degradation rate of stack were increased respectively. From the result of stack performance, optimum operation current of this system was 24 A, considering current efficiencies and cell degradations.

• 경영과학
• /
• 제11권3호
• /
• pp.67-85
• /
• 1994

We design an integrated production management system that incorporates management tasks of procurement of materials, production, and marketing. It includes MRP simulation on small or medium sized companies, design of databases, and definition of relevant objects in production environments. The system has been designed using object-oriented programming concept not only to represent the real-world situation easily, but also to help system integration. Graphics-User Interface(GUI) is also employed for the efficiency of production planning.