• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.32-41
• /
• 2015

The Metropolitan Area Green Heat Project (MAGHP), which collects unused heat gathered from power plants, steel works, landfills in western Metropolitan area and distribute it to integrated energy business (IEB) companies, is proposed for the purpose of enhancing energy efficiency and providing low-price heat for IEB companies. Therefore, in order to decide on whether to initiate the MAGHP, the economic feasibility analysis of the project is widely demanded. This paper attempts to consider and measure four economic benefits: heat supply benefit, production cost reduction benefit, greenhouse gas mitigation benefit, and air quality improvement benefit. In addition, the paper tries to conduct the economic feasibility analysis. The project requires three-year investment and thirty-year operation. Three important findings emerge from the analysis. First, its net present value is computed to be 1,269 billion won and more than zero. Second, its benefit/cost ratio is calculated to be 1.72 and bigger than 1.0. Third, its internal rate of return is estimated to be 24.26% and larger than the social rate of return, 5.5%. In conclusion, the MAGHP is socially profitable and should be conducted immediately.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.239-248
• /
• 2015

The nature of molecular mechanisms governing embryonic cell block is largely unknown, but recent reports have demonstrated that proper execution of programmed cell death is crucial for this process. The main objective of this study is to determine effects of programmed cell death on porcine oocytes development in vitro after parthenogenesis. Among the blastocysts matured in 3MA, MAP1LC3A and ATG5 RNA gene expression level increased in the order of Cyst < 3MA < RP. However, Casp-3 and TNF-r RNA gene expression level decreased in the order of RP < 3MA < Cyst. Expression of mTOR within the RP-cultured blastocyst was the most highly to the inner cell mass, while 3MA-cultured blastocyst showed very lowest expression in inner cell mass. The expression of mTOR showed a pattern opposite to that of MAP1LC3A. That is, its expression was the lowest in Cyst group. When the enzymatic activity of MMP-2 and MMP-9 was assessed in culture, the level of active MMP-9 was higher expression in the medium of each RP treatment group, with the level of another treatment group being relatively higher. Analyses of TIMP-2 and TIMP-3 revealed that their expression was higher in groups that did not receive RP treatment. More specifically, the level of TIMP-2 was not affected by Cyst treatment, while the level of TIMP-3 was higher in 3MA and RP treatment group. There was highly cell division activation efficiency of parthenogenesis on cultured system of RP supplement IVC medium. Therefore, these results suggest that embryo development was significantly increased in conditional culture medium with active autophagy as compared to common cultured condition. Further investigation of this distinction may enable the development of innovative improvements for the production of porcine somatic cell nuclear transfer.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.9
• /
• pp.1701-1710
• /
• 2017

Classical swine fever virus (CSFV) is the etiologic agent of classical swine fever, a highly contagious disease that causes significant economic losses to the swine industry. The lapinized C-strain, a widely used vaccine strain against CSFV, has low growth efficiency in cell culture, which limits the productivity in the vaccine industry. In this study, a recombinant virus derived from C-strain was constructed and subjected to continuous passaging in PK-15 cells with the goal of acquiring a high progeny virus yield. A cell-adapted virus variant, RecCpp80, had nearly 1,000-fold higher titer than its parent C-strain but lost the ability to induce fever in rabbits. Sequence analysis of cell-adapted RecC variants indicated that at least six nucleotide changes were fixed in RecCpp80. Further adaption of RecCpp80 variant in swine testicle cells led to a higher virus yield without additional mutations. Introduction of each of these residues into the wild-type RecC backbone showed that one mutation, M979R (T3310G), located in the C-terminal region of E2 might be closely related to the cell-adapted phenotype. Rabbit inoculation revealed that $RecCpp40_{+10}$ failed to induce fever in rabbits, whereas $RecCpp80_{+10}$ caused a fever response similar to the commercial C-strain vaccine. In conclusion, the C-strain can be adapted to cell culture by introducing specific mutations in its E2 protein. The mutations in RecCpp80 that led to the loss of fever response in rabbits require further investigation. Continuous passaging of the C-strain-based recombinant viruses in PK-15 cells could enhance its in vitro adaption. The non-synonymous mutations at 3310 and 3531 might play major roles in the enhanced capacity of general virus reproduction. Such findings may help design a modified C-strain for improved productivity of commercial vaccines at reduced production cost.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.855-859
• /
• 2011

The main pollutants from zirconium alloy tubing manufacturing process in nuclear industry are nitrate ($NO_3-N$) and fluoride (F-)Nitric acid, and hydrofluoric acid is used for acid pickling. The process for the removal of nitrate and fluoride is composed of 1st chemical coagulation, SOD (Sulfur Oxidation Denitrification) process using sulfur-oxidizing denitrification, and 2nd chemical coagulation. The characteristic of the wastewater treatment is an application of SOD process. The SOD Process is highly received attention because it is significantly different from existing processes for sulfur denitrification. A JSC (JeonTech-Sulfur- Calcium) Pellet is unification of sulfur and alkalinity material. According to result of SOD process in wastewater treatment plant, the removal efficiency of T-N was over 91% and the average concentration of T-N from influent was 147.55 mg T-N/L and that from effluent was 12.72 mg T-N/L. Therefore, SOD process is a useful to remove nitrogen from inorganic industrial wastewater and a new development of microbial activator was shown to be stable for activation of autotrophic bacteria.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.556-563
• /
• 2007

We carried out a laboratory scale experiment about the characteristics of chemically active species produced in hybrid gas-liquid discharges. The electrode configuration which had high voltage electrode in the gas phase and ground electrode in the liquid was utilized while high voltage electrode has been typically positioned in the liquid in other studies. Our electrode was configured in such a way as to increase the energy efficiency of chemical reactions by creating a higher electrical field strength and a narrower pulse width than the typical electrode configuration. The highest ozone concentration was obtained at 45 kV which was the medium value in operating voltages. The decrease of solution conductivity increased the resistance of liquid phase and the electric field strength through the gas phase, so ozone gene-ration rate was enhanced. The increase of voltage promoted the production rate of hydrogen peroxide by increasing the electric field strength. In a lower voltage, the increase of solution conductivity increased the degradation rate of $H_2O_2$, so the $H_2O_2$ generation rate decreased. On the other hand, the effects of UV radiation, shock waves etc. increased the $H_2O_2$ generation rate as the solution conductivity increased. A higher rate of $H_2O_2$ generation can be achieved by mixing argon to oxygen which generates a stronger and more stable discharges.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.195-202
• /
• 2020

The production of larger of ships is a survival strategy for global shipping companies to pursue the economics of scale. According to this strategy, to respond to this situation, many containers are loading/unloading simultaneously in the hub port. Additionally, the container terminals are promoting the introduction of automation to expand the terminal facilities and increase efficiency/productivity of the container yards. European ports have introduced automation to address rising labor costs and shortages of labor. Recently, the construction of fully automated container terminals is increasing in the United States and China to resolve problems such as the slow growth of the global economy, the emergence of large ships, air pollution, and safety accidents. Domestic ports are at an early stage compared to the world's advanced container terminals, and countermeasures are being prepared to respond to the changing ports. However, research on the recognition difference analysis that examines the opinions of stakeholders is insufficient. As a result of analyzing the recognition among the groups, it was found that container terminal operators reduced labor costs, improved shipping services for shipping companies, prevented safety accidents for port union labor, and increased service for port authority and government agencies. Thus, to closely examine the perception among the groups, one-way ANOVA was performed, and then the implications were deduced as the basic data for the smooth introduction of automation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6336-6343
• /
• 2014

The aim of this study was to consider new 3D printing techniques and how to use them in architecture, compare the 3D printing and current techniques, and analyze them economically. 3D printing technology is expected to result in considerable changes to the entire system, such as production and distribution using this new technology in the near future. In addition, architecture is expected to follow this trend. This study examined how to take advantage of 3D printing technology in construction to prepare for a new architectural trend of 3D printing technology in the future. This study examined the 3D printing technology that is used in buildings and the current state of 3D printing technology. In addition, the 3D printing technology and current technology was also compared, and analyzed economically. 3D printing technology is the step before the stage of practical use. On the other hand, the commercialization of 3D printing technology makes it possible to reduce the cost compared to the current method. Furthermore, as the technology is developed in the future, the cost is expected to be reduced further. Therefore, the use of 3D printing technology in architecture is expected increase continually.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.84-92
• /
• 2020

Most facilities in chemical plants operate in environments that are outside the range of temperature and pressure that can be encountered on a daily basis, and are vulnerable to aging due to these stresses and environmental conditions. The facilities exposed to these conditions are not only likely to fail due to cumulative damage, but also lead to accidents if maintenance and replacement are not performed.Recommendation guidelines called risk-based inspection are widely used around the world-wide. However, limits exist for facilities that have already elapsed for a certain. As a result of the survey on the aging of Ulsan industrial complex in Korea, which carries out proper inspection, many of the facilities have been used for 20 years. Also, most of the facilities where the accident occurred have been in operation for more than 20 years. Therefore, this study suggested criteria for classifying devices that have exceeded a certain period of use as obsolete facilities. In addition, quantitative risk assessment was conducted. The safety investment method using the cost-benefit analysis method was proposed in order to calculate the loss cost and reduce the risk by expressing the risks of the corresponding aged facility as an Economic index. By utilizing the method of cost-benefit analysis of old facilities using the quantitative risk assessment presented in this study, it can be expected to improve the performance and life of old facilities, improve production efficiency and reliability of the system of facilities, change the recognition of safety management costs, increase employee stability, and reduce loss costs.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.269-273
• /
• 2005

The wild ginseng culture by-products(WGCB) was added to the laying hens diets. A total of 420 Lohmann Brown laying hens were alloted to five levels of drinking water containing WGCB 0, 0.4, 0.8 1.6, $3.2\%$with seven replications and fed com-soybean meal based diets contained ME 2,800 kcal/kg, CP $16\%$. Laying Performance, egg quality, egg yolk fatty acid and cholesterol concentration were measured. Egg Production and daily e99 mass were significantly lower(p<0.05) in birds fed the WGCB $3.2\%$ compared with no WGCB group, but showed no significant effect in other treatments. Feed efficiency of birds fed $0.4\%$ WGCB showed the lowest of all treatments(p<0.05). Eggshell thickness was increased(p<0.05) by WGCB supplementation, whereas eggshell breaking strength, haugh unit and yolk color index were not affected. No significant change in yolk fatty acids and cholesterol were observed by the addition of WGCB.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.530-537
• /
• 2015

Photovoltaic (PV) modules are environmentally energy conversion devices to generate electricity via photovoltaic effect of semiconductors from solar energy. One of key elements in PV modules is "Backsheet," a multilayered barrier film, which determines their lifetime and energy conversion efficiency. The representative Backsheet is composed of chemically resistant poly(vinyl fluoride) (PVF) and cheap poly(ethylene terephthalate) (PET) films used as core and skin materials, respectively. PVF film is too expensive to satisfy the market requirements to Backsheet materials with production cost as low as possible. The promising alternatives to PVF-based Backsheet are hydrocarbon Backsheets employing semi-crystalline PET films instead of PVF film. It is, however, necessary to provide improved barrier property to water vapor to the PET films, since PET films are suffering from hydrolytic decomposition. In this study, a polyurethane adhesive with reduced water vapor permeation behavior is developed via a homogeneous distribution of hydrophobic silica nanoparticles. The modified adhesive is expected to retard the hydrolysis of PET films located in the core and inner skin. To clarify the efficacy of the proposed concept, the mechanical properties and electrochemical PV performances of the Backsheet are compared with those of a Backsheet employing the polyurethane adhesive without the silica nanoparticles, after the exposure under standard temperature and humidity conditions.