Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Study of Trends in The Architecture and The Economic Efficiency of 3D Printing Technology

3D프린팅 기술의 건축분야 활용 동향과 경제성에 관한 연구

  • Jung, Suk-Jae (Department of Architecture, Soonchunhyang University) ;
  • Lee, Tae-Hee (Department of Architecture, Soonchunhyang University)
  • 정석재 (순천향대학교 건축학과) ;
  • 이태희 (순천향대학교 건축학과)
  • Received : 2014.09.26
  • Accepted : 2014.10.10
  • Published : 2014.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The aim of this study was to consider new 3D printing techniques and how to use them in architecture, compare the 3D printing and current techniques, and analyze them economically. 3D printing technology is expected to result in considerable changes to the entire system, such as production and distribution using this new technology in the near future. In addition, architecture is expected to follow this trend. This study examined how to take advantage of 3D printing technology in construction to prepare for a new architectural trend of 3D printing technology in the future. This study examined the 3D printing technology that is used in buildings and the current state of 3D printing technology. In addition, the 3D printing technology and current technology was also compared, and analyzed economically. 3D printing technology is the step before the stage of practical use. On the other hand, the commercialization of 3D printing technology makes it possible to reduce the cost compared to the current method. Furthermore, as the technology is developed in the future, the cost is expected to be reduced further. Therefore, the use of 3D printing technology in architecture is expected increase continually.

본 연구는 최근 사회적으로 대두되고 있는 3D 프린팅 기술에 대하여 고찰하고, 건축적인 활용 방안을 모색함에 있어 활용 방안과 경제적인 관점에서 비교 및 분석하는 것이 목적이다. 이는 근접한 미래에 3D 프린팅 기술에 의해 생산, 유통 등의 전반적인 패러다임의 변화가 예상되고, 건축분야 역시 그 변화의 흐름을 맞을 것이다. 이에 3D 프린팅 기술의 건축에서 활용 방안을 모색함은 앞으로 3D 프린팅 기술로 인하여 바뀌는 건축환경에 대하여 대비하기 위함이다. 본 연구를 위하여 3D 프린팅 기술의 현황과 건축에서 사용되는 3D 프린팅 기술에 대하여 조사하고, 3D 프린팅 기술의 건축적 활용 방식과 현재 시공 방식을 경제적인 부분에서 비교 분석 하였다. 현재 건축분야에서의 3D 프린팅 활용기술은 아직 실용화 단계이나, 현재의 시공 방식과 경제성으로 비교해 보면, 전체 비용을 낮출 수 있으며, 향후 기술의 발전과 더불어 이러한 비용은 더욱 감소될 것으로 보인다. 이에 따라서 앞으로 3D 프린팅 기술의 건축적 활용 방안에 대한 지속적인 기술 개발 및 관심이 필요하다.

Keywords

References

  1. Moon, Hyeon-Seok, "3D Printer - Innovation of Construction Production Method", Korea Institute of Construction Engineering and Management, v.15, no.2, 42-47, 2014.
  2. Choi, Sung-Kwon, "3D Printing Technology and Architectural Application", Review of Architecture and Building Science, v.58, no.2, 17-25, 2014.
  3. Hiroshi, The Takenaka freely formwork in 3D printer , nihon Keizai Shimbun, 2014 Aug 8,Available From: http://www.nikkei.com/article/DGXMZO75366290X00C14A8000000/, (Accessed Sep, 13, 2014)
  4. DUS Architecture, 3D Print Canal House, DUS Architecture, 2014, Available From: http://3dprintcanalhouse.com/, (Accessed Sep, 13, 2014)
  5. IAAC, Small robots printing big structures, Minibuilder by IAAC, 2014, Available From: http://iaac.net/printingrobots/, (Accessed Sep, 13, 2014)
  6. IAAC, JORIS LAARMANLAB, A RADICALLY NEW 3D PRINTING METHOD, MATAERIAL, 2014, Available From: http://www.mataerial.com/ (Accessed Sep, 13, 2014)
  7. Behrokh Khoshnevis, CONTOUR CRAFTING, USC Viterbi School of Engineering, 2014, Availavle Ffrom: http://www.contourcrafting.org/, (Accessed Sep, 13, 2014)
  8. Behrokh Khoshnevis, House of the Future: Construction by Contour Crafting, URBAN INITIATIVE POLICY BRIEF, 1-6, 2004
  9. Lee, Tae-Hee, "architectural field application trend of 3D Printer", The Korea Academia-Industiral Cooperation Society , v.6, no.2, 30-35, 2014.

Cited by

  1. A Case Study on Collaborations in 3D Printing Fashion vol.66, pp.7, 2016, https://doi.org/10.7233/jksc.2016.66.7.124