• 한국수소및신에너지학회논문집
• /
• 제20권5호
• /
• pp.416-423
• /
• 2009

High-temperature steam electrolysis (HTSE) using solid oxide cell is a challenging method for highly efficient large-scale hydrogen production as a reversible process of solid oxide fuel cell (SOFC). The overall efficiency of the HTSE hydrogen and synthesis gas production system was analyzed thermo-electrochemically. A thermo-electrochemical model for the hydrogen and synthesis gas production system with solid oxide electrolysis cell (SOEC) and very high temperature gas-cooled reactor (VHTR) was established. Sensitivity analyses with regard to the system were performed to investigate the quantitative effects of key parameters on the overall efficiency of the production system. The overall efficiency with SOEC and VHTR was expected to reach a maximum of 58% for the hydrogen production system and to 62% for synthesis gas production system by improving electrical efficiency, steam utilization rate, waste heat recovery rate, electrolysis efficiency, and thermal efficiency. Therefore, overall efficiency of the synthesis production system has higher efficiency than that of the hydrogen production system.

• East Asian Economic Review
• /
• 제19권2호
• /
• pp.167-188
• /
• 2015

The objective of this study is to obtain a better understanding of the current rice production condition in Myanmar through efficiency analysis, especially, to examine the impact of farm mechanization on Myanmar rice production efficiency. For representation of efficiency and the determinants, this paper uses both the data envelopment analysis (DEA) and the stochastic frontier approach (SFA) with variable returns to scale on Myanmar rice production. The efficiency of the rice production was estimated and subsequently the determinants factors were investigated based on the estimated efficiency level of these sample farmers. The empirical evidence finds that farm mechanical tools significantly improve the Myanmar rice production efficiency.

• International journal of advanced smart convergence
• /
• 제9권2호
• /
• pp.179-184
• /
• 2020

Recently, webtoons-based animations have been expanding in Korea, where the role of mobile devices is growing, and media videos such as "YouTube" and "Tik-Tok," which have shorter screening and production cycles than traditional feature films, dramas, and animations, are attracting attention and being enjoyed by public. In order to produce animation content that fits the trend of this shortening video and production cycle, efficiency must be increased not only in story but also in production. Production methods and production technologies need changes to increase efficiency. Animation using motion capture, which is highly production-efficient, is widely used in movies that shows realistic movements, but still has little use in producing cartoon-style animations with exaggerated movements. We analyzed the production method of 2D animation and CG animation and applied the result to CG animation to increase the efficiency of production and production. The methods of production through such experiments are expected to help improve the efficiency of producing animation content that is suitable for the latest trends such as webtoon animation.

• 융합경영연구
• /
• 제9권3호
• /
• pp.11-21
• /
• 2021

Purpose: The purpose of this study is to understand the status quo of production efficiency in private industrial enterprises above designated scale in China's 31 provinces (including municipalities directly under the central government, autonomous regions) (hereinafter referred to as China's 31 provinces). Research design, data and methodology: Find out the factors affecting the development of production efficiency in private industrial enterprises, using DEA, Data Envelopment Analysis and Malmquist index analysis, build the evaluation model of production efficiency in private industrial enterprises, and analyze the data of China's 31 provinces private industrial enterprises in 2015-2019. Results: The research results show that the production efficiency of private industrial enterprises in China is improving on the whole. Although the total factor productivity has decreased slightly, the overall efficiency and pure technical efficiency have increased significantly. Conclusions: The conclusion of this study can provide reference for Chinese private industrial enterprises to improve production efficiency and make development plan. The limitation of this paper lies in the fact that the private industrial enterprises in inefficient provinces have not been given specific improvement plans.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.97-103
• /
• 2006

The development of a heat exchanger production model based on the microlamination technology and it's economic efficiency is addressed. A microchannel production model is proposed for the high-volume production. The microlamination system is made up of lamina patterning, laminae sorting and laminae bonding. A cost estimation model is developed based on the hewn cycle time and capital equipment costs. An economic efficiency analysis is performed to determine the cost drivers under the different market and product scenarios. The result of the economic efficiency analysis indicated that the device size and the production rate have a great effect on the overall manufacturing cost of microlamination devices. And it can be concluded that the microlamination should focus on bonding larger laminae and reducing both cycle time and warpage.

• 대한교통학회지
• /
• 제28권5호
• /
• pp.31-41
• /
• 2010

본 논문에서는 2005년 1사분기부터 2009년 3사분기까지 개별 화물자동차 운전자들의 실제 화물운송 실적자료를 이용하여 영업용 도로화물운송업의 업종 및 품목별 생산 효율성을 평가하고, 위탁관리제 및 다단계거래 등 규제적 요인을 포함하여 영업용 도로화물운송업의 생산 효율성에 영향을 미치는 요인들을 분석하였다. 구체적으로 영업용 도로화물운송업의 생산 효율성 평가를 위해 자료포락분석법을 적용하였고, 개별 화물자동차 운전자들의 생산 효율성에 미치는 영향요인을 분석하기 위해 토빗모형을 이용하였다. 분석결과, 개별화물과 용달화물보다는 일반화물 업종의 생산 효율성이 더 높은 것으로 분석되었으며, 품목별로는 철강화물의 생산 효율성이 가장 높고, 유류화물의 생산 효율성이 가장 낮은 것으로 평가되었다. 특히 시간이 지남에 따라 영업용 도로화물운송업의 생산 효율성은 소폭 증감을 보이고 있으나, 전반적으로 증가하는 추세를 보이고 있다. 아울러 본 연구에서는 실증분석결과를 토대로 영업용 도로화물운송업의 생산 효율성 증대를 위한 정책방향을 제시하였다.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.53-59
• /
• 2001

The Primary Production of phytoplanktons produces organic matter in high concentration in eutrophicated Hakata Bay, Japan, even during the winter season in spite of low water temperature. Phytoplanktons are considered to have any biological capabilities to keep activities of photosynthesis under the unfavorable conditions, and this affects water quality of the bay. In this study, seasonal variations in primary production efficiency were predicted by using a simple box-type ecosystem model, which introduced the concept of efficiency for absorption of solar radiation energy in relation to growth of phytoplanktons under the low solar radiation intensity. According to the simulation result of primary production, it was organic pollution comes from dissolved organic carbon (DOC) throughout the year, DOC of which is originated from the primary production of phytoplanktons on biological response of the seasonal variation of ambient conditions.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8719-8727
• /
• 2015

본 연구는 장미농가의 생산효율성을 측정하고, 경영의 비효율성에 영향을 미치는 요인을 파악하기 위한 연구이다. SFA(Stochastic Frontier Analysis) 기법과 DEA(Data Envelopment Analysis) 기법을 사용하여 생산효율성을 측정하였으며, 효율성에 영향을 미치는 요인을 분석하기 위하여 Tobit 회귀 분석을 실시하였다. 먼저, SFA 방법을 통한 생산효율성은 88.4%으로 측정되었으며, DEA 방법에서 불변규모수익(CRS) 모형과 변동수익규모(VRS) 모형을 통해서는 생산효율성이 각각 78.5%와 85.2%로 측정되었다. 특히 두 가지 방법의 생산효율성 측정결과는 각 경영체의 효율성 순위를 동일하게 설명하고 있어 상호보완적이다. 다음으로 Tobit 분석 결과, 투입한 6개의 변수가 모두 효율성에 영향을 미치는 것으로 나타났으며, 종묘비와 제재료비는 (+) 부호를 나타냄과 동시에 회귀계수가 가장 크게 나타나 효율성에 미치는 영향력이 가장 큰 경영 항목으로 분석되었다. 이러한 결과는 장미농가는 종묘비와 제재료비의 투입을 증대시켜 더욱 높은 소득을 창출하는 방식으로 경영 효율성을 증대시켜야 함을 시사한다.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.148-155
• /
• 2006

This paper presents a new method for assessing the efficiency of production process plans using tolerance chart to lower production cost. The tolerance chart is used to predict the accuracy of a part that is to be produced following the process plan, and to carry out the quantitative measurement on the efficiency of the process plan. By comparing the values of design tolerances and their corresponding resultant tolerances calculated using the tolerance chart, the process plan that is incapable of satisfying the design requirements and the faulty production operations can be identified. Similarly, the process plan that imposes unnecessarily high accuracy and wasteful production operations can also be identified. For the latter, a quantitative measure on the efficiency of the process plan is introduced. The higher the unnecessary cost of the production, the poor is the efficiency of the process plan. A coefficient is introduced for measuring the process plan efficiency. The coefficient also incorporates two weighting factors to reflect the difficulty of manufacturing operations and number of dimensional tolerances involved. To facilitate the identification of the machining operations and the machined surfaces, which are related to the unnecessarily tight resultant tolerances caused by the process plan, a rooted tree representation of the tolerance chart is introduced, and its use is demonstrated. An example is presented to illustrate the new method. This research introduces a new quantitative process plan evaluation method that may lead to the optimization of process plans.

• 한국시뮬레이션학회논문지
• /
• 제23권4호
• /
• pp.229-235
• /
• 2014

생산시스템의 시간과 비용 효율성을 개선하는 것은 경쟁 우위를 구축하고 경쟁적인 비즈니스 환경에서 수익성을 향상하는 중요한 수단 중 하나이다. 그 중에서도 CONWIP(constant work-in-process)과 DBR(drum-buffer-rope)방법은 생산 공정의 효율을 개선하는 데 널리 사용된다. 이 연구에서는 실제 단추 공장 생산 시스템의 시뮬레이션 모델을 개발했다. 연구 결과에 의하면, CONWIP과 DBR 생산시스템 모두 병목 공정의 대기 시간을 감소시키는 등 실제 생산시스템보다 나은 결과를 나타냈다. 시뮬레이션 모델 결과를 바탕으로 제안된 생산시스템을 적용함으로써, 실제의 제조 공정의 효율을 크게 향상시킬 수 있을 것으로 기대된다.