• Korean journal of applied entomology
• /
• v.41 no.4
• /
• pp.269-277
• /
• 2002

Ecological studies on entomopathogenic nematodes are required to increase control efficacy against target insect pests and to obtain basic information for mass production. Thus, effect of temperature and nematode concentration on infectivity and reproduction of Steinernema carpocapsae Pocheon and that of exposure time and soil depth on infectivity were examined using Galleria mellonella larvae. Infectivity and reproduction were examined at five temperatures, 13, 18, 24, 30 and 35$^{\circ}C$ with seven concentrations, 0, 5, 10, 20, 40, 80 and 160 infective juveniles (IJs)/larva. Temperature and nematode concentration influenced infectivity and reproduction of S. carpocapsae Pocheon. Although G. mellonella larvae were killed by S. carpocapsae Pocheon at all given temperatures and nematode concentrations, mortality was higher at 24$^{\circ}C$ than other temperatures. Lethal time of G. mellonella by S. carpocapsae Pocheon was shorter with increasing temperature and nematode concentrations. S. carpocapsae Pocheon was not established in G. mellonella at 13 and $35^{\circ}C$. Time for the first emergence from G. mellonella cadaver was longer $18^{\circ}C$ (about 20 days) than 24 and $30^{\circ}C$ (about 5 days). The highest number of progenies was obtained at $24^{\circ}C$ with 80IJs/1arva, i.e., $18.8$\times$10^4$IJs were produced from a larva. In the exposure time assay, G. mellonella death was recorded in 10 minutes when 300 IJs were inoculated per larva. When S. carpocapsae Pocheon was inoculated at the rate of $10^{9}$ IJs/ha to G. mellonella at the depth of 0, 2, 5 and 10 cm of sand columns, 100% mortality and similar sex ratio were observed but number of established IJs in cadaver was decreased with deepening the soil depth. The results indicated that optimum temperature for infectivity and reproduction of S. carpocapsae Pocheon was $24^{\circ}C$ In addition, S. carpocapsae Pocheon was effective to target insects within 5 cm from the soil surface.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.898-907
• /
• 2017

This study was aimed to test harvest time effect with polyethylene (PE) film liner, 1-methylcyclopropene (1-MCP) and aminoethoxyvinylglycine (AVG) treatments on fruit quality attributes in 'Sangjudungsi' persimmon fruit during cold storage. The fruits were harvested 10 days earlier in 2016 than the mature harvest time in 2015. The ethylene production was significantly lower in early harvested fruits than in mature harvested ones. Flesh firmness was maintained higher in 1-MCP treated fruit than in other treatments during cold storage. The rate of fruit weight loss was significantly inhibited by PE film liner treatment during storage, regardless of harvest time. 1-MCP treatment showed less change in fruit peel color variables ($L^*$ and $b^*$) from the calyx-end and equatorial regions during cold storage, compared with those from the control and PE film treatments. The incidence rate of fruit decay and softening was higher in PE film treated fruits than in the other treatments. However, there was no decay detected in AVG treated fruit. The early harvested fruits were maintained higher flesh firmness, compared with mature harvested fruits. Nevertheless, the mature harvested fruits showed much higher soluble solids content, the redness (Hunter a value) of the fruit peel and respiration rate, compared with early harvested fruits. Furthermore, the rate of weight loss in the fruit was remarkably inhibited in the PE film treatment.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.876-882
• /
• 2016

The antioxidant and anti-inflammatory effects of Corni fructus extracts (CEF, EtOAc extraction; CBF, buthanol extraction; CWF, water extraction) were investigated. The total phenolics of CEF (173.3 mg TAE/g) were significantly higher than those of CWF (26.7 mg TAE/g) and CBF (94.8 mg TAE/g). DPPH and ABTS free radical scavenging activity of CEF (DPPH: $RH_{50}$; $25.1{\mu}g/mL$, ABTS: $RC_{50}$; $36.1{\mu}g/mL$) showed even higher than that of BHA and ${\alpha}-tocopherol$ used as positive control. All three Corni fructus extracts in the concentration of $1{\sim}100{\mu}g/mL$ were effective inhibitors of NO and prostaglandin $E_2$ ($PGE_2$). NO production was inhibited 71.3~92.2% by CEF, 76.8~85.5% by CBF and 74.4~96.9% by CWF, respectively. CEF, CBF and CWF ($1{\sim}100{\mu}g/mL$) inhibited also pro-inflammatory cytokines like $TNF-{\alpha}$, $IL-1{\beta}$ and IL-6 very effectively. $TNF-{\alpha}$ was inhibited up to 51.2% by CWF and $IL-1{\beta}$ was inhibited up to 67.1% by CEF. IL-6 was best inhibited by CEF up to 58.9%. This study suggested the potential of Corni fructus for use as an excellent antioxidant substance and inflammatory inhibiting mediators. Therefore CEF, CBF and CWF Corni fructus extracts may be used for therapeutic approach to various inflammatory diseases.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.187-195
• /
• 2017

This study evaluated quality characteristics of soybean fermented by selected lactic acid bacteria, which were the enzyme strains with high antimicrobial activities isolated from traditionally prepared soybean paste. We determined total aerobic and lactic acid bacteria counts, protease and amylase activities, reducing sugar and amino-type nitrogen contents, and the amounts of amino acids, organic acids, and aroma-compounds. The total aerobic bacteria counts in soybean fermented with strain I13 ($7.75{\times}10^9CFU/mL$) were the highest among all the strains analyzed. Lactic acid bacteria numbers were $2.85{\times}10^9$ to $4.35{\times}10^9CFU/mL$ in soybean fermented with isolates. Amylase and protease activities of the JSB22 sample were the highest among all sample. Reducing sugar and amino-type nitrogen contents of soybean fermented with JSB22 (1.23%, 94.52 mg%) were highest. Total amino acid content of the samples was 15.88-17.62%, and glutamic acid, aspartic acid, leucine, lysine, and arginine were the major amino acids. Lactic acid (0.82-3.65 g/100 g), oxalic acid (22.74-63.57 mg/100 g), and fumaric acid (2.88-6.33 mg/100 g) were predominant organic acids. A total of 39 volatile aroma-compounds were identified, including 2 esters, 5 ketones, 7 alcohols, 14 hydrocarbons, 2 heterocyclic compounds, 4 acids, and 5 miscellaneous compounds. These results represent useful information for the development of a starter (single or complex) and will be used for production of functional fermented soybean foods.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.197-205
• /
• 2013

This study established a method for preserving chicken primordial germ cells (PGCs) that enables long-term storage in liquid nitrogen ($LN_2$) for preservation of the species. The purpose of this study was to compare the effects of Ethylene Glycol (EG) and Propylene Glycol (PG) on viability of cryopreserved PGCs with vitrification in Korean Native Chicken (Ogye), and to fine should be find or to the optimal protocol for PGCs freezing. One of the important components of cryopreservation process is cryopreservation medium that plays a vital role in preventing cellular injury during freeze-thawing. Cryoprotective agents have been known to improve cell viability after freeze-thawing. PGCs obtained from the germinal gonade of 5.5~6 day (stage 28) chick embryos, using the MACS method were suspended in a freezing medium containing a freezing and protecting agents. Gonads were harvested from stage 28 chick embryos and pooled in groups of 10E embryos, contributing gonads to the cell suspension. The gonadal cells, including PGCs, were then frozen in 1 of the following cryoprotectant treatments: 2.5% EG, 5% EG, 10% EG, 2.5% PG, 5% PG, 10% PG, and 0% cryoprotectant as a control. Effects of exposure to vitrification solution and vitrification, with different concentrations of the cryoprotectant solution, were examined. After freezing and thawing, survival rates of the frozen-thawed PGCs from the 0, 2.5, 5, 10 and 15% EG plus FBS treatment were 44.24%, 64.51%, 85.63%, 80.51% and 73.52% (p<0.05), respectively. The viability of PGCs after freeze-thawing was significantly higher for 10% EG plus FBS treatment than for 10% PG + FBS treatment (p<0.05)(85.63% vs 66.81%). Therefore, these systems may contribute in the improvement of cryopreservation for a scarce species in birds preservation. This study established a method for preserving chicken PGC that enables systematic storage and labeling of cryopreserved PGCs in liquid N at a germplasm repository and ease of entry into a database. In the future, the importance for this new technology is that poultry lines can be conserved while work is being conducted on improving the production of germline chimeras.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• The Korean Journal of Mycology
• /
• v.6 no.1
• /
• pp.29-41
• /
• 1978

This study aims to brew apple wine containing lower concentration of alcohol by fermentation and to retain $CO_2$ gas in apple wine, and investigation for the possibility of storage at room temperature was performed. A Saccharomyces sp. was proved to be acceptable for production of base wine as its higher fermentation rate at $20{\sim}25^{\circ}C$. However, B-2 was most reasonable for post-fermentation of apple wine as this strain strongly ferments sugars at low temperature $(4^{\circ}C)$. The yield of apple juice increased by maceration of apple pulps. The yield was about 5 % more than that of the unmacerated juice, whereas acid content was decreased by 10% compared with control. When stored apple wine containing 9% alcobol was introduced $1{\sim}3%$ sucrose at $7{\sim}8^{\circ}C$ for 100 days or more, the $CO_2$ pressure of apple wine in bottle shows $3kg/cm^2$ by bottle-pressure meter. It showed good storage of the wine at room temperature. $CO_2$ gas pressure in apple wine containing 6% alcohol, $5{\sim}10%$ hop extract, and 2% sugar was $2kg/cm^2$, he result also showed possibility of storage. Whereas 6% concentration of alcoholic apple wine without hop extract caused unusual fermentation during storage at the same condition. The desirable conditions for high quality apple wine should have $CO_2$ pressure of $2kg/cm^2$ or more and should be added $1{\sim}2% sugar to base wine. From these results, it can be concluded that the brewing of lower alcoholic apple wine is possible.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• Korean journal of food and cookery science
• /
• v.32 no.4
• /
• pp.390-399
• /
• 2016

Purpose: The objective of this study was to examine the effect of plant scale and cooking conditions on the quality characteristics of sausages during refrigerated storage. Methods: Sausages used in this study were classified into two groups: those submitted to $1^{st}$ cooked treatments and those submitted to $2^{nd}$ cooked treatments. The pH, volatile basic nitrogen (VBN), gas production ratio, and microorganisms were measured in triplicate. Results: The change of quality in the products was assessed every 7 days by measuring pH, VBN levels, total microbes, coliform bacteria, Escherichia coli, and pathogenic bacteria in the products. Pathogenic bacteria such as Staphylococcus aureus, Listeria monocytogenes, Clostridium perfringens, and E. coli were not detected in the sausages with $1^{st}$ cooked treatments. The results showed that the pH of the sausages decline as storage time increased. The pH value of the sausages with $2^{nd}$ cooked treatments changed gradually. VBN levels were generally lower in products with $2^{nd}$ cooked treatments than in those with $1^{st}$ cooked treatments, but they varied with the type of products. On the $35^{th}$ day, the number of total microbes ranged between 6.13-7.12 log CFU/g in products with $1^{st}$ cooked treatments and 3.44-6.92 log CFU/g in products with $2^{nd}$ cooked treatments, showing fewer bacteria in the latter products. Conclusions: $1^{st}$ cooked treatments were effective in microbial control, but $2^{nd}$ cooked treatments could prolong the shelf life of the sausages, indicating a need for differential management of each product.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.278-286
• /
• 2003

Alcohol is well known agent which can damage the human tissues such as liver via stimulating lipid peroxidation. On the other hand, carotenoids in addition to vitamins A, C and I play important roles in protecting these oxidative damages as well as preventing the production of free radicals. This study was carried out to investigate the effect of dietary vitamin A on lipid peroxidation and antioxidants status in ethanol-treated rats. In the experiment, male Sprague-Dawley rats weighing 160~180 g were given a liquid diet containing 36% of total calories as ethanol for 7 weeks. The pair-fed control rats received an isocaloric amount of diet containing sucrose instead of ethanol on the following day Additionally, the liquid diet contained adequate amount of $\beta$-carotene, retinyl acetate or 13-sis-reinoic acid except vitamin A-deficient diet. The results obtained are as follows. The levels of plasma and hepatic lipid peroxide were increased after chronic ethanol feeding in rats. Retinyl acetate supplementation significantly reduced lipid peroxidation induced by ethanol feeding Glucose 6-phosphatase activity was significantly reduced in rats fed vitamin A-deficient diet with ethanol and alkaline phosphatase activity was significantly induced in rats fed 13-cis-reinoic acid diet with ethanol. Catalase and alcohol dehydrogenase activities did not show a consistent tendency in experiment groups. The hepatic antioxidant enzyme activities did not significantly changed by chronic ethanol feeding groups. The striking decrease in conversion of $\beta$-carotene to retinol was observed in rats fed a $\beta$-carotene diet with ethanol feeding The level of retinol and retinoic acid in plasma and liver was decreased after chronic ethanol administration Based on this result, these data suggest that ethanol feeding enhances oxidative stress especially in those fed a vitamin A-deficient diet, and vitamin A supplementation, especially, retinyl acetate intake can prevent enhanced lipid peroxidation and related damage to some extent.