• 산업경영시스템학회지
• /
• 제15권25호
• /
• pp.63-74
• /
• 1992

This study proposes D- shortage control system which is a convenient tool for cooperative companies to reduce shortages which frequently break out between the manufacturing companies and the cooperative companies. On the ground of theoretical analysis of MRP and JIT system, D- shortage control system sets up a schedule that secures the delivery date by precedent scheduling( D-) comparing with MRP It also syncronizes business, production and release, and builds the pull system comparing with JIT. The factors causing shotages are the scheduling absurdity and the controlling absurdity. The scheduling absurdity can be settled by the calculating required quantity method of MRP and the controlling absurdity can be settled by daily control of business, production and pruchasing fuctions by the pull system of JIT. And the inventory and the WIP can be reduced by the operating of PULL system and by the settlement of D- shortage control practices. The Application of D- shortage control system, therefore, enables the rationalization of logistics and reduces the inventory And it leads to the reinforced competitiveness and the security of subsistence of manufacturer by the cost ruduction, the reduction of financial difficulty, and the insurance of the delivery date.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.202-210
• /
• 2019

In order to maximize the utilization of sewage sludge, a waste from wastewater treatment facility, the residual sewage sludge generated after lipid and carbohydrate extraction for biodiesel and bioethanol production was used to produce bio-oil by pyrolysis. Thermogravimetric analysis showed that sludge pyrolysis mainly occurred between 200 and $550^{\circ}C$ (with peaks formed around 337.0 and $379.3^{\circ}C$) with the decomposition of the main components (carbohydrate, lipid, and protein). Bio-oil was produced using a micro-tubing reactor, and its yield (wt%, g-bio-oil/g-residual sewage sludge) increased with an increase in the reaction temperature and time. The maximum bio-oil yield of 33.3% was obtained after pyrolysis at $390^{\circ}C$ for 5 min, where the largest amount of energy was introduced into the reactor to break the bonds of organic compounds in the sludge. The main components of bio-oil were found to be trans-2-pentenoic acid and 2-methyl-2-pentenoic acid with the highest selectivity of 28.4% and 12.3%, respectively. The kinetic rate constants indicated that the predominant reaction pathway was sewage sludge to bio-oil ($0.1054min^{-1}$), and subsequently to gas ($0.0541min^{-1}$), rather than the direct conversion of sewage sludge to gas ($0.0318min^{-1}$).

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.81-91
• /
• 2021

This paper investigates the long run hedging ability of precious metals against the risks associated with adverse conditions of economic and financial variables for Pakistan, the USA, China, and India. Monthly data of gold, silver, platinum, stock returns, exchange rate, industrial production, and inflation was collected for the selected economies. Saikkonen and Lutkepohl (2002) unit root test was employed to access the unit root properties of the data series and identify the break dates. Furthermore, this study used the Johansen cointegration test with and without structural breaks to identify the long-run relationship between metals prices and different financial and economic variables. The findings suggest that the time series under study have unit root problem at level with and without structural breaks. Without considering structural breaks, the Johansen trace test indicates that in Pakistan and China, gold, silver, and platinum hold a cointegrating relationship with macroeconomic and financial variables. For the US, gold indicates cointegration which supports the hedging ability of gold against inflation, stock, and industrial production in the long run. The results of the cointegration test after incorporating the structural breaks provide even stronger evidence of the long-run relationship of precious metals and consumer prices, exchange rate, and stock prices.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.177-184
• /
• 2016

스마트 테크놀로지 시대의 디지털 콘텐츠 주 소비자층의 연령대가 과거에 비해 확대되어가고 있다. 소비자는 다양한 형태로 콘텐츠의 생산과 배포에 주도적으로 참여하고 있으며 그 중심에는 매개체로서의 Personal Digital Device, 콘텐츠 그리고 생산과 소비, 이야기 하는 자와 듣는 자의 경계를 무너뜨린 포스트 모던한 사회 구조와 공간이 존재한다. 세상에 똑같은 것의 존재를 거부하는 콘텐츠 주 소비 계층의 성향과 이를 관통하는 포스트 모던적 스토리텔링의 제공은 다양한 형태의 콘텐츠로 거대한 산업 군을 형성한다. 본 연구의 수행을 위해 영화와 게임, 광고 등의 사례를 통하여 소비자가 주도적으로 참여하며 일반성을 배제하고 그들만의 독창적 스타일로 콘텐츠의 중심을 개인으로 옮겨가는 모습들을 추적하는 방식을 따랐다. 연구결과 현재의 시점에서 광고와 영상, 사용자 주도형 게임 콘텐츠의 경향을 통해 관계성을 되짚어보고 콘텐츠 제작 분야의 다양한 융합 가능성에 대한 인식의 변화를 가져왔다.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1407-1413
• /
• 2011

소형풍력발전시스템의 복합재 블레이드에 대한 실규모 구조시험 및 이를 모사한 구조해석을 통하여 설계 타당성을 검증하였다. 먼저 IEC 61400-2 에 규정된 설계 요구조건의 만족을 위하여 정격 풍속 및 IEC 61400-2 Case H 의 최악 조건에 대한 구조해석을 수행하고 이를 통하여 적층 순서 및 적층 두께를 결정하였다. 또한 이러한 구조해석의 타당성 검증을 위하여 IEC 61400-23 에 따라 구조해석과 동일한 하중조건에서의 실규모 구조시험을 실시하였다. 이러한 실규모 구조시험을 통한 구한 블레이드의 하중-변위 선도 및 표면의 변형률 특성을 이용하여 블레이드의 구조적 안전성을 평가하였다.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.91-99
• /
• 2010

A Model of small scale total mixed rations(TMR) plant which can be utilized round bales was developed, tested and analyzed in this study. This study consist of two parts. One is development of a small scale TMR plant model which was already reported at the previous paper. This is the second part of the study. For the study, a series of tests of the model plant were performed and its costs was analyzed. Also, the break-even point of the model plant by comparing with market price of commercial TMR feed was determined. Results of the research are summarized as follows ; As the results of mixing test, the average coefficient of variation(CV) value for mixing of the feed was 13.0 % at the gate of the mixer. The production cost was estimated as 8,298 won/head for dairy cattle farm and 2,495 won/head for beef cattle farm, when producing 8 batch a day. Also, it is recommended to utilize the model plant when farm size is over 79 heads for dairy cattle farm and 113 heads for beef cattle farm. As an overall conclusion, the model plant designed for farm size TMR feed mill will be very useful model for both beef cattle and dairy farms in Korea. Also it is expected that the capital investment for the model plant can be recovered with 8 months compare with purchasing commercial TMR feed if the model plant feeds 1,000 beef cattle approximately.

• 수산경영론집
• /
• 제45권2호
• /
• pp.29-38
• /
• 2014

This study is to analyse the timing of the structural change of price volatility and the asymmetry of price volatility during the period before and after the timing of the structural change of price volatility using Jeju Farming Olive Flounder's production area market price data from January 1, 2007 to June 30, 2013. The analysis methods of Quandt-Andrews break point test and Threshold GARCH model are employed. The empirical results of this study are summarized as follows: First, the result of Quandt-Andrews break point test shows that a single structural change in price volatility occurred on May 4, 2010 over the sample period. Second, during the period before structural change, daily price change rate has averagely positive value which means price increase, but during the period after structural change daily price change rate has averagely negative value which means price decrease. Also, daily volatility of price change rate during the period before structural change is higher than during the period after structural change. This indicates that price volatility decreases after structural change. Third, the estimation results of Threshold GARCH Model show that the volatility response against price increase is larger during the period after structural change than during the period before structural change. Also the result shows the volatility response against price decrease is larger during the period after structural change than during the period before structural change. And, irrespective of the timing of structural change, price increase has an larger effect on volatility than price decrease. This means volatility is asymmetric at price increase.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.365-372
• /
• 2016

Purpose: Tea is the most frequently consumed drink worldwide, next to water. About 75% of the total world tea production includes black tea, and withering is one of the major processing steps critical for the quality of black tea. There are two types of tea withering methods: physical and chemical withering. Withering can be achieved by using tat, tunnel, drum, and trough withering systems. Of these, the trough withering system is the most commonly used. This study focuses on the different types of withering, their effect on the various quality attributes of tea, and other aspects of withering methods that affect superior quality tea. Results: During physical withering, tea shoots loose moisture content that drops from approximately 70-80% to 60-70% (wet basis). This leads to increased sap concentration in tea leaf cells, and turgid leaves become flaccid. It also prevents tea shoots from damage during maceration or rolling. During chemical withering, complex chemical compounds break down into simpler ones volatile flavor compounds, amino acids, and simple sugars are formed. Withering increases enzymatic activities as well as the concentration of caffeine. Research indicates that about 15% of chlorophyll degradation occurs during withering. It is also reported that during withering lipids break down into simpler compounds and catechin levels decrease. Improper withering can cause adverse effects on subsequent manufacturing operations, such as maceration, rolling, fermentation, drying, and tea storage. Conclusion: Freshly harvested leaves are conditioned physically and chemically for subsequent processing. There is no specified withering duration, but 14-18 h is generally considered the optimum period. Proper and even withering of tea shoots greatly depends on the standards of plucking, handling, transportation, environmental conditions, time, and temperature. Thus, to ensure consumption of high quality tea, the withering step must be monitored carefully.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제20권2호
• /
• pp.93-98
• /
• 2010

Bumblebees are widely used to pollinate various crops, especially tomato, in greenhouses and fields. An artificial hibernation is essential for year-round rearing of the bumblebee, which passes through one generation per year. Here, we investigated whether a chilling temperature and humidity affect artificial hibernation of the bumblebee queen Bombus terrestris. In chilling temperature regimes of $0^{\circ}C$, $2.5^{\circ}C$, $5^{\circ}C$, $7.5^{\circ}C$ or $12.5^{\circ}C$ under constant humidity >70%, the queens stored at $2.5^{\circ}C$ exhibited the highest rate of survival, which was 74.0% at one month, 67.0% at two months, 60.0% at three months, 46.0% at 4 months, 33.0% at 5 months, and 24.0% at 6 months. Rates of survival decreased at the following temperatures: $0^{\circ}C$, $5^{\circ}C$, $7.5^{\circ}C$ and $12.5^{\circ}C$. Colony developmental characteristics after diapause were 1.2- to 1.5-fold higher than those of queens stored at $5^{\circ}C$. In terms of chilling humidity, the queens hibernated at 70% under $2.5^{\circ}C$ exhibited the highest rate of survival, which was $93.3{\pm}3.4%$ at one month, $83.3{\pm}0.0%$ at two months, $76.7{\pm}0.0%$ at 3 months and $36.7{\pm}12.1%$ at 5 months. The rates of oviposition, colony foundation and progeny-queen production of queens hibernated at 70% were 80.8%, 30.8% and 30.8%, respectively. These values correspond to 1.7- to 3.3-fold increases in comparison to queens stored at 50% humidity. Therefore, $2.5^{\circ}C$ and 70% R.H. were the favorable chilling temperature and humidity conditions for diapause break of B. terrestris queens.

• 한국실내디자인학회논문집
• /
• 제21호
• /
• pp.54-61
• /
• 1999

The Fashion Distribution Business (FDB) is thriving to such an extent that the current period is called "The Era of Fashion." This FDB shows tendencies towards specialzation, globalization and expansion. The domestic FDB has been rapidly globalizing, and thus it is time for us to recognize that the fashion business has grown beyond its former role as a production-oriented retail business to include multiple new roles. This strategy to plant Store Identity on customers is just a Visual Merchandising (VMD) Strategy. That is, a strategy to visualize the Product Planning, which can be called a Complex Visual Expressing Technical System that classifies and arranges products in order to be easily seen, chosen, and bought through exhibition and arrangement. My aim is to break away from the conept that has been focused only on display division and to present product scheme correctly and to establish a VMD Plan which can also contribute to sales promotion by providing infirmation and arranging Store Display efficiently for customers. Additionally, this is aimed to present an efficient and sensitive design process.esign process.