The two most common mushroom species grown in Korea are pearl oyster mushroom (Pleurotus ostreatus) and king oyster mushroom (P. eryngii). In recent years, the production of king oyster mushroom greatly increased due to the automation of the cultivation facilities, and it became a major export mushroom owing to its excellent shelf life. However, the increase in the production of king oyster mushroom led to a decline in its market price; thus, necessitating the development of new mushroom species that could replace king oyster mushroom, to diversify the mushroom market for the benefit of both, the producers and the consumers. The Mushroom division at the National Institute of Horticultural & Herbal Science (NIHHS) reported the development of a new interspecific hybrid between P. ferulae and P. tuoliensis, referred to as 'Creamy.' Two parental strains KMCC00430 (Bisan2ho, P. ferulae) and KMCC00461 (P. tuoliensis) were selected based on the results of genetic resource analysis, and their monokaryons were collected. About 1,000 Mon-Mon crosses were performed and 73 of them were selected. Following repeated cultivation tests and strain analyses, we selected strain 7773, which had a bright creamy pileus and a thick straight stipe, and named it 'Creamy.' Optimum temperature for mycelial growth of Creamy was 25-30℃, and that for fruiting body growth was 16℃. The pileus, which had a brighter creamy color, was small in size with a diameter of 61.2 mm. Although it was cultivated in suboptimal conditions, such as low temperature and high CO2 concentration, Creamy was characterized by its straight and smooth stipe. Field production tests and further analyses indicated that the yield of Creamy was 5% higher than that of Baekhwang. It is expected that Creamy, the new interspecific hybrid with a bright creamy pileus and a pleasant flavor, will help create new opportunities for mushroom farmers and diversify the mushroom market.
This study aims to analyze the impact of cement industry on region change. For this study Maepo-Eub was selected as study area, where three cement factories are located. The data for analysis were obtained from interviews, questionaire surveys and the employee list of each cement factory. The analytic procedures for this study are as follows: 1) The change of regional employment was analyzed by development was industry in terms of the permanent address, education level, occupational status of the employee. 2) The degree of population growth are analyzed by developmental staae of the industry. Some conclusions from this study follows: 1) As these cement factories were built at Maepo in the 1960's, there were plenty of employment opportunities. Thus many technicians and workers flooded in Maepo-Eub. in the 1970's with the expansion of production facilities therewere much more immigrants to the industrial region, while there were outflow in the neighboring rural areas. In the 1980's the opportunity for the employment of cement factories have been decreased due to the introduction of the automation processes and larger, sized machines. Among the employee of three cement factories the native of Chungcheongbukdo (65%; in them Danyang 52%, Jecheon 32%) is dominant, the second is from Kangwon-do (13%), and the third is from Kyungsangbuk-do (11%) adjacent to Chungcheongbuk-do. It means that there are more employment opportunity in the near places of cement factories. 2) In the period of 1960's study area had experineed rapid social increase in population by the development of cement industry. That is, cement industries created new job opportunities and attracted large population concentration into this area. In the period of 1970's the population of the industrial region have increased continuously, while the population of neighboring rural areas have decreased. In the period of 1980's the population of Maepo decreased steadily because of decrease of labour forces through automation and commuting. Thus in the early stage of idustrial development large population concentrated in the neighboring villages of cement factories, and formed residential areas, commercial areas and service areas. As agricultural and was encroached, rural people left their regions to live in the more convenient suburbs. 3) People engaged in cement industry think that cement industry has a favorable influence on regional development, such as creating job opportunity, raising income level, developing business and service sector, and leading high economic growth. While farmers and some people think that cement industries as a pollution causing factories have a harmful influence on regional development, sucha as injuring the crops, causing environmental pollution, and being harmful to health. If pollution problems are solved, I think Maepo will play an important role as a regional center which can offer employment opportunity, business and service function to pheripheral rural areas, and raise a income level.
Due to the transformation to the intelligent information society, the rapid change of our life and environment is expected. The Ministry of Science and ICT (MSIT) and the National Research Council of Science and Technology (NST) introduced a five-year government supported research institution's planning and evaluation based on the mid-to long-term perspective. This study collects international benchmarking information including industry, academia, and research fields by collecting mid- and long-term strategy reports from public research institutes, surveys by experts from abroad universities and research institutes, and analyzing overseas market information reports. The British Geological Survey (BGS), the U.S. Geological Survey (USGS) and the japanese geological survey related institutes (AIST-GSJ) plans for three-dimensional national geological information, predictions of geological environmental disasters, and development of important metals and material in the low carbon economic transformation and in the era of the Fourth Industrial Revolution. The mid- and long-term program emphasizes basic and public research on geological information through abroad experts survey such as the IPGP-CNRS etc. The market analysis of the mining automation and digital map sectors has been able to derive the fields in which the role of public research institutes by the market is expected such as data collection on land and in the air, mobile or three-dimensional information production, smooth/fast/real-time maps, custom map design, mapping support to various platforms, geological environmental risk assessment and disaster management information and maps.
As a core process in the manufacture of state-of-the-art industrial technologies such as semiconductor and LCD, a clean room is the most important process which can affect the performance and quality of products drastically. Nevertheless, scientific research on comprehensive safety measures from a fire protection standpoint is not being carried out in Korea. This study aims to derive measures to improve smoke control systems by identifying performance and problems of smoke systems installed in clean rooms as an LCD manufacturing process and analyzing fire and evacuation simulations considering several scenarios. As a result of analysis of fires and smoke in a clean roomas an LCD manufacturing process, it is found to be necessary to stop air handling units through interlocking in case of a fire and exhaust smoke out of the room through the top of FAB in consideration of buoyancy of smoke. It is also found to be necessary to install quick response sprinkler heads and accessories to accelerate the response time, because the heat-accumulating performance of sprinkler heads decreases in this application. Despite its low density of dwelling due to the automation process, clean room is characterized by an array of complex production equipment and working environment requiring dustproof clothes, which makes it difficult to acquire evacuation safety performance. Thus, thorough control of danger factors in processes and periodic education and training are required. It is also necessary to establish a level of domestic technologies equivalent to the level of standards of advanced countries in fire protection.
This study is a case study of the research study and education with high school students of natural sciences. Recent development of the Internet of Things (IoT) based on the subject of various studies exist. This study is one of the most portable communication devices of these infancy, yet students were easy to define the molding process of contacting a pager that can go along way in making research topics. We called a pager. Today, it is given a large and complex smart mobile communication devices that can be used for big data. Prior pagers are taught the meaning of the first mobile communication means in our lives were given device. The internal structure is relatively simple and is thought to function relatively simple, just suitable as a teaching practices of high school students with an interest in science and engineering universities. This study can see all of the mechanical, electronic information contents of the radio pager in a relatively simple analysis of the injection molding ONE CAVITY analysis. Furthermore, the students also rated good educational practices that give meaning to remind the convergence training on mass production and process automation.
The stagnant growth in 3D market due to 3D movie contents shortage is encouraging development of techniques for production cost reduction. Elimination of vertical disparity generated during image acquisition requires heaviest time and effort in the whole stereoscopic film-making process. This matter is directly related to competitiveness in the market and is being dealt with as a very important task. The removal of vertical disparity, i.e. image rectification has been treated for a long time in the photogrammetry field. While computer vision methods are focused on fast processing and automation, photogrammetry methods on accuracy and precision. However, photogrammetric approaches have not been tried for the 3D film-making. In this paper, proposed is a photogrammetry-based rectification algorithm that enable to eliminate the vertical disparity precisely by reconstruction of geometric relationship at the time of shooting. Evaluation of proposed algorithm was carried out by comparing the performance with two existing computer vision algorithms. The epipolar constraint satisfaction, epipolar line accuracy and vertical disparity of result images were tested. As a result, the proposed algorithm showed excellent performance than the other algorithms in term of accuracy and precision, and also revealed robustness about position error of tie-points.
Kim, Hyeon-Guk;Hwang, Soon-Woong;An, Bo-Young;Heo, Jun-Hyung;Choi, Youn-Sung;Shin, Kyoo-Sik;Han, Chang-Soo
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.2
/
pp.644-652
/
2018
This paper describes the conceptual design of a customized gripper for the assembly process of IT products, which has a relatively short and regular product replacement cycle. The grippers that are used in the manufacturing field are mostly composed of one to two degrees of freedom and they can only handle one object, not multiple ones. Cost is also an important factor. If it were possible to develop a gripper suitable for the assembly process quickly and easily, some of the difficulties involved in its automation caused by the frequent changes of product and process could be solved. The assembly process utilized for this research is defined and described as the procedure and method of the process analysis due to the confidentiality of the manufacturer. We used an axiomatic design to derive the functional requirements and design parameters of the gripper used for the tablet PC assembly process. We proposed a design method for the conceptual design of the gripper by determining these parameters. For the feasibility study, a specific process was selected and the progress of the gripper design was described as an example. Although there have been studies on the design guidelines for grippers, their considerations are too general and their degree of freedom is too high. This paper defines the function of the gripper based on the assembly process of the IT products, which allows their production to be streamlined and automated. In this research, we attempted to produce a design that reflects the assembly process, not just one that enables objects to be held.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.12
/
pp.446-452
/
2016
Recently, heat resistant super alloys (which are wear-resistant, corrosion-resistant, and heat-resistant), have been used as the basic structural material in offshore and petrochemical plants. On the other hand, making valves from very expensive, high heat-resistant alloys increases the production cost and decreases its market competitiveness. To solve these problems, the technique of overlaying only those that flow on the fluid has been used as an effective method. Nevertheless, because the former technique of overlaying the ball is performed manually, it takes too much time and perfect welding is difficult to perform. To solve this problem, this study developed a robot automation system that can make uniformly overlay welding of the ball for ball-valves. The system consists of a 6-axis welding robot with a welding torch and additional 2 axes for the rotation of positioner, the controller, and a robot path OLP (Off-Line Programming). The CAD drawing data was entered in the Off-line program to obtain the robot teaching point and drive source. Overlay welding paths were implemented using Matlab. Through an automated overlaying system that implemented the OLP, the productivity rose 2.58 times, as the amount of time required for work decreased from 88 hours to 41 hours.
The dynamics of business cycles has been changed by the macroscopic economic forces because of the introduction of new technical know-how each year. These the dynamics of business has a significant influence on the investment of enterprise in the information communication field. Today, the most important goal of the IT investment is simply not to lower the production cost any more, but to improve the usefulness for the customers and partners in order to obtain the optimized mass products. Therefore, the enterprises have been concentrating their all abilities on the automation, integration, and optimization of business process using BPM. In addition, they are concentrating their efforts on the business expansion by approaching the technical aspect using RFID application system. However, in order to accomplish a successful enterprise ability, the technical view, business process view, and organization view must be considered together. We suggested the method considering organization view, via the technical element, i.e., RFID system for approaching the business process. Furthermore, we tried the optimization of assignment using Context Analysis methodology and proposed the method to reduce the element with respect to the time, human, and expense by applying the Case Study method that minimizes the iteration times through the transmitted processing procedure and type. The proposed method gave us the expectation that it will bring out the innovative improvement with respect to the time, expense, quality, and customer's satisfaction in the process from the analysis of business process to the analysis and design of system.
Hanok is a cultural heritage containing our ancestor's life style intact and breathing alive with us until now. As Hanok has been concerned as a echo-friendly architecture, a new methodology for efficient construction without damaging the traditional construction process comes into request. The goal of this research is development of a architectural design tool based on the BIM(Building Information Modeling) for satisfying these demands. It will be usable to support whole process of the traditional building from digital design to production and construction. Firstly, we take a consideration of the traditional architecture reflecting the spirit of the age and suggest efficient design method for architectural components. Each components is pre-fabricated as a template representing similar components. All pre-fabricated components are designed by object-oriented concepts so, many variations for a component can be derived from the pre-fabricated component. Our method is helpful for reducing design errors because that it considers combining rule between connecting components in the template design. Moreover it is plugged in the commercial architectural CAD, so it can supports digital design not only traditional architecture but also fusion style mixed with modern architecture.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.