• 제목/요약/키워드: Production areas

검색결과 1,821건 처리시간 0.03초

부산시장래교통량의 추계수법에 관한 실증적 연구 (Actual Research on the Estimation Technique of the Future Trip in Pusan City.)

  • 오윤표
    • 대한교통학회지
    • /
    • 제5권2호
    • /
    • pp.97-112
    • /
    • 1987
  • The objective of this study is to construct not only trip production and attraction in Pusan but also to study and examine appropriateness of the model positively. Depending on the estimation models of trip production and attraction of each zone that have been constructed in this study, it has been proved that the formula of multiple regression by the explanation variables like the indices of total employees, total students, floor spaces of residentials and floor spaces of educational and cultural areas within the study areas have very high explanatory capacity and appropriateness. It si considered that a study of method on new division, integration or omission etc. of the existing zones preceeding for reduction of calculation quantity and a study of estimation error have to be done for future study, if these models are used actually.

  • PDF

항공사진을 이용한 DEM 제작에 관한 연구 (Study on Production of DEM Using Aerial Photo)

  • 박충선;이광률
    • 한국지형학회지
    • /
    • 제25권3호
    • /
    • pp.105-120
    • /
    • 2018
  • This study estimates possibility and limitation on production of DEM using aerial photo by comparison of DEMs using aerial photo and digital map. Mountain and urban areas show higher elevation in DEM using aerial photo than in DEM using digital map, due to height of vegetation cover and buildings, respectively. However, artificial affects due to bridge, embankment and road construction are responsible for areas with higher elevation in DEM using digital map than in DEM using aerial photo. This difference in elevation between DEMs seems to be caused by rapid change in real elevation that is not reflected in digital map. There is little difference in elevation between DEMs in plain and area with little or no vegetation cover. This study suggests that problems associated with vegetation cover and error by GCP should be fixed, although DEM using aerial photo can quantitatively and 3-dimensionally reconstruct topography with a high resolution.

Incidence and Causes of Sub-Clinical Mastitis in Dairy Cows on Smallholder and Large Scale Farms in Tropical Areas of Tanzania

  • Shem, M.N.;Malole, J.M.L.;Machangu, R.;Kurwijila, L.R.;Fujihara, T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권3호
    • /
    • pp.372-377
    • /
    • 2001
  • A study on the prevalence and causes of sub-clinical mastitis was conducted on ten smallholder and large-scale dairy farms in Morogoro urban and peri-urban areas. A total of 65 lactating cows were screened using the California Mastitis Test (CMT). Confirmatory tests used included; the direct microscopic somatic cell count (DMSCC), culture, bacteriological and biochemical tests. Structured questionnaires were used to collect information on management aspects. Results showed 62% and 4% cows as sub- clinical and clinical mastitis cases respectively. Levels of infection were higher on smallholder farms (75%) than on large-scale farms (25%). All tested cows had high cell counts (>500,000) per ml of milk. Incidences of mastitis were significantly (p<0.05) related to milking practices. The dominant bacterial isolates in the same order were Staphylococcus aureus, Streptococcus spp, and Escherichia coli. Other organisms isolated included Pseudomonas spp and Klebsiella spp. It was concluded that the high rates of sub-clinical mastitis in the research area were mainly due to poor management and unhygienic milking practices.

Emission characteristic of ammonia in cement mortars using different sand from area of production

  • Jang, Hongseok;So, Hyoungseok;So, Seungyoung
    • Environmental Engineering Research
    • /
    • 제21권3호
    • /
    • pp.241-246
    • /
    • 2016
  • This paper discusses the influence of organic matter contained in aggregate on the emission characteristic of ammonia ($NH_3$) from cement mortar. $NH_3$ can be released to indoor-outdoor environment through diffusion in mortar (or concrete) and have resulted in the increasing air pollution, and especially well known as a harmful gas for the human body. The concentration of $NH_3$ released from cement concrete was then compared to the contents of organic matter contained in the aggregate. The result indicates that the contents of organic matter in the aggregate significantly differ with types of aggregate from different areas of production. The organic matter becomes organic nitrogen through the process of microbial breakdown for a certain period and pure ammonium ion ($NH_4{^+}$) is produced from the organic nitrogen. The $NH_4{^+}$ was reacted with alkaline elements in the cement and released as $NH_3$ from cement concrete through a volatile process. The released $NH_3$ was proportional to the contents of $NH_4{^+}$ adsorbed in the aggregate from different areas of production and the concentrations of $NH_3$ emission from cement mortar according to the aggregate differ by more than 4 times.

THE COST OF SEMEN PRODUCTION AND THE RATE OF CONCEPTION FOR ARTIFICIAL INSEMINATION IN CATTLE

  • Alam, J.;Akteruzzaman, M.;Rahman, A.;Sayeed, M.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제6권1호
    • /
    • pp.13-17
    • /
    • 1993
  • This study was conducted to determine the cost of production of semen and the rate of conception for artificial insemination in eight randomly selected districts of Bangladesh. A sample of 640 adopting farms were investigated. Results indicate that the cost of liquid semen per dose on full-cost and cash cast basis were Tk. 16.17 and Tk. 14.48, while the cost of locally produced exotic semen and imported semen were Tk. 31.25 and Tk. 110.00 respectively. The cost of liquid semen per insemination, per conception and per progeny on full-cost were Tk. 26.65, Tk. 50.64, and Tk. 56.27 respectively and on cash cost were Tk. 23.88, Tk. 45.37 and Tk. 50.41 respectively. The average cost of semen paid by the farmers was Tk. 14.00 and it was higher in urban areas than in rural areas. Out of the cost of A.I. centres, government had subsidized 92.16 percent and the rest 7.84 percent accrued as returns. About 40 percent of the produced semen was lost in the system which could not be used at all. The conception rate on first insemination was 53.6 percent. The rate increased to 73.2 percent upto the last insemination. The difference in conception rate between liquid semen (69.97%) and frozen semen (70.48%) was not statistically significant.

침향(沈香)의 산지와 무역에 근거한 기원 연구 (A Research on the origin of Aquilariae Lignum based on its production area and trading status in history)

  • 김광민;김인락
    • 대한본초학회지
    • /
    • 제26권4호
    • /
    • pp.163-168
    • /
    • 2011
  • Objective : The purpose of this study is to determine the origin of Aquilariae Lignum. Method : Firstly identify the production areas of Aquilariae Lignum and its trading status with China in Chinese history through Chinese historical books such as Twenty-Five Histories(二十五史) and the records of the Chosun Dynasty and then, compare the distribution of the genus Aquilaria in the concerned areas. Result : Since the records in the NanfangCaomuZhuang(南方草木狀) written in 304 saying that Aquilariae Lignum was produced in Vietnam and had white flowers, Vietnam had led production and trading of Aquilariae Lignum until Qing Dynasty(淸代). Even though Thailand traded Aquilariae Lignum during Qing Dynasty, however, the volume was at a low level. Aquilariae Lignum from southern Thailand, Malaysia and Indonesia was rated as low quality and low-priced because of its fishy smell and strong flavor. Conclusion : These results show that the origin of Aquilariae Lignum comes from Vietnam and this species is distinguished from the ones of Indodesia or Malaysia.

딥러닝을 활용한 반도체 제조 물류 시스템 통행량 예측모델 설계 (A Deep Learning-Based Model for Predicting Traffic Congestion in Semiconductor Fabrication)

  • 김종명;김옥현;홍성빈;임대은
    • 산업기술연구
    • /
    • 제39권1호
    • /
    • pp.27-31
    • /
    • 2019
  • Semiconductor logistics systems are facing difficulties in increasing production as production processes become more complicated due to the upgrading of fine processes. Therefore, the purpose of the research is to design predictive models that can predict traffic during the pre-planning stage, identify the risk zones that occur during the production process, and prevent them in advance. As a solution, we build FABs using automode simulation to collect data. Then, the traffic prediction model of the areas of interest is constructed using deep learning techniques (keras - multistory conceptron structure). The design of the predictive model gave an estimate of the traffic in the area of interest with an accuracy of about 87%. The expected effect can be used as an indicator for making decisions by proactively identifying congestion risk areas during the Fab Design or Factory Expansion Planning stage, as the maximum traffic per section is predicted.

사천만 양식 굴의 유통 특성 연구 (A Study on the Characteristics of the Cultured Oyster Marketing in Sacheon Bay)

  • 박봉룡;강종호
    • 수산경영론집
    • /
    • 제53권4호
    • /
    • pp.069-078
    • /
    • 2022
  • This study studied the characteristics of cultured oyster marketing in Sacheon Bay. The results of this study are summarized as follows. First, the GULDAE aquaculture is a unique production method of Sacheon Bay. Second, oysters in Sacheon Bay were low in production, but the price was more than 70% higher than in other producing areas. Third, profit is 12.5% higher and rate of return was 179.8%. Fourth, there were more out-of-market sales than other than other producing areas, and it is a bidding method. Fifth, the marketing cost was higher than the longline hanging aquaculture; however, the advantage of price offseted this point. Although the Sacheon Bay Oyster aquaculture is small, it was confirmed that it was a producing area with high profitability and a unique marketing form from other regions. Although the Sacheon Bay Oyster culture is small, it has been confirmed that it is a producing area with high profitability and shows a unique distribution form.

Optimal installation of electric vehicle charging stations connected with rooftop photovoltaic (PV) systems: a case study

  • Heo, Jae;Chang, Soowon
    • 국제학술발표논문집
    • /
    • The 9th International Conference on Construction Engineering and Project Management
    • /
    • pp.937-944
    • /
    • 2022
  • Electric vehicles (EVs) have been growing to reduce energy consumption and greenhouse gas (GHG) emissions in the transportation sector. The increasing number of EVs requires adequate recharging infrastructure, and at the same time, adopts low- or zero-emission electricity production because the GHG emissions are highly dependent on primary sources of electricity production. Although previous research has studied solar photovoltaic (PV) -integrated EV charging stations, it is challenging to optimize spatial areas between where the charging stations are required and where the renewable energy sources (i.e., solar photovoltaic (PV)) are accessible. Therefore, the primary objective of this research is to support decisions of siting EV charging stations using a spatial data clustering method integrated with Geographic Information System (GIS). This research explores spatial relationships of PV power outputs (i.e., supply) and traffic flow (i.e., demand) and tests a community in the state of Indiana, USA for optimal sitting of EV charging stations. Under the assumption that EV charging stations should be placed where the potential electricity production and traffic flow are high to match supply and demand, this research identified three areas for installing EV charging stations powered by rooftop PV in the study area. The proposed strategies will drive the transition of existing energy infrastructure into decentralized power systems. This research will ultimately contribute to enhancing economic efficiency and environmental sustainability by enabling significant reductions in electricity distribution loss and GHG emissions driven by transportation energy.

  • PDF

Gas ebullition associated with biological processes in radioactively contaminated reservoirs could lead to airborne radioactive contamination

  • E.A. Pryakhin;Yu.G. Mokrov;A.V. Trapeznikov;N.I. Atamanyuk;S.S. Andreyev;A.A. Peretykin;K. Yu. Mokrov;M.A. Semenov;A.V. Akleyev
    • Nuclear Engineering and Technology
    • /
    • 제55권11호
    • /
    • pp.4204-4212
    • /
    • 2023
  • Background: Storage reservoirs of radioactive waste could be the source of atmospheric pollution due to the efflux of aqueous aerosol from their water areas. The main mechanism of formation of aqueous aerosols is the collapse of gas bubbles at the water surface. In this paper, we discuss the potential influence of biological factors on gas ebullition in the water areas of the radioactively contaminated industrial reservoirs R-9 (Lake Karachay) and R-4 (Metlinsky pond) of the Mayak PA. The emission of the released non-dissolved gases captured with gas traps in reservoir R-9 was (88-290) ml/m2 per day (2015) and in reservoir R-4 (270-460) ml/m2 per day (2016). The analysis of gas composition in reservoir R-4 (60% methane, 35% nitrogen, 2.4% oxygen, 1.5% carbon dioxide) confirms their biological origin. It is associated with the processes of organic matter destruction in bottom sediments. The major source of organic matter in bottom sediments is the dying phytoplankton developing in these reservoirs. Conclusion: The obtained results form the basis to set a task to quantify the relationship between the phytoplankton development, gases ebullition and radioactive atmosphere contamination.