• Korean Journal of Computational Design and Engineering
• /
• v.10 no.3
• /
• pp.199-209
• /
• 2005

In this paper, a digital simulation model for an automotive assembly line is constructed by adapting a digital manufacturing methodology. Applied methodology is a simulation for a plant level of the assembly production line. The first significance of this methodology is a validation of the production planning based on various scenarios. The second is pre-verification for the new production plan or production method. The third is a visualization of the production process. Several models were implemented and those models were verified. Then, it was possible to find a most efficient production scenario and production method.

• Industrial Engineering and Management Systems
• /
• v.14 no.4
• /
• pp.413-419
• /
• 2015

This study solved the problem of unstable production chains by considering allocation rate conformance. We proposed two phased algorithm suitable for solving production planning that considers allocation rate conformance; the first phase was heuristic initial solution generation, and the second phase was tabu-search based solution improvement. By using three data sets which have different sizes of data and three different criteria, the results of proposed algorithm were compared with MIP results. The proposed algorithm showed the best production plan in terms of allocation rate conformance, and it was appropriate for other criteria; it solved the problem of unstable production chains by solving concentrated and unfair allocation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.52-53
• /
• 2021

PC (Precast Concrete) method was preferred for reasons such as shortening of construction period, cost reduction, and quality. However, in the case of factory production, precast concrete has a problem in that transportation conditions in the transportation process, damage during transportation, overhead and profit of the factory are required. If work and PC members are produced on site, transportation and installation costs can be reduced. However, research on field production has not been conducted. Therefore, based on the on-site production plan without PC, the cost and quality of factory production and on-site production are compared and analyzed.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2001.05a
• /
• pp.163-167
• /
• 2001

Modem stag setting construction method is tend to deversity and difficult to take a regular form. Each production is consituted by interpretion of the producer. It has been reproducting a new work of production. The domestic of large stage system and play conditions other stage's variety structure or divert various of reality conversion that how to used to give attention to reality. We have a stage plan a part of stage domain and in consideration of conversion system through a play stage's plan construction and purpose basic data in other to supply.

• International journal of advanced smart convergence
• /
• v.13 no.2
• /
• pp.229-234
• /
• 2024

A smart factory is defined as a cutting-edge, intelligent factory that integrates all production processes from product planning to sales with information and communication technology. Through these factories, each company produces customized products with minimal cost and time. The smart factory promotion project in Korea has produced positive results even in difficult environments such as the COVID-19 situation. Through the transition to a smart manufacturing production system, the competitiveness of small and medium-sized businesses has been greatly strengthened, including increased productivity and reduced costs. This study was based on surveyed data conducted by organizations related to smart factory promotion in 2020. Significant contents and major characteristics that emerged from the surveyed data were inferred and described. Since the meaningful contents reflect the reality of the company, more efficient promotion of smart factories will be possible in the future.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.249-252
• /
• 2007

The objective of this research is to study the method to produce biotope map by using GIS. Surveying and analyzing the situation of biotope map in the country, it was found that biotope map should be produced to be utilized in establishing urban plan and environment preservation plan. Considering the history of materials, preparation method and type of use, the types of original materials can be classified into 3 types, namely, data based on configuration map, the existing thematic map and materials of surveying natural ecology. Biotope map is composed of configuration thematic map that shows the shape and position of surface, urban thematic map that is the standard of unit biotope shape and urban ecology map that shows the urban ecologic situation. Extracted and processed from the original material, each thematic map is produced as biotope map that shows the type of biotope. It is expected that biotope map can be utilized in the area of urban plan including establishment of basic urban plan and urban management plan as well as environment planning area including evaluation of environment influence, establishment of environment preservation plan, consolidated environment management for natural environment and life environment.

• Journal of Families and Better Life
• /
• v.21 no.1
• /
• pp.61-72
• /
• 2003

This study examines the problematic fact that most housewives are excluded from receiving the benefits of the National Pension Plan in South Korea. The National Pension Plan assigns no value to housework or household production, which in turn discourages full-time housewives from participating voluntarily in the Plan. In this article, I propose to utilize Credit Splitting and Pension Sharing in order to take into account full-time housewives' economic contribution in the National Pension Plan. In this article, I also discuss the ranges and application methods of the Credit Splitting and Pension Sharing. For this study, I have analyzed the data of 11,967 unemployed married women living with spouses published in“Research Data on Everyday Life Time Usage”by the Korea National Statistical Office in 1999. The value of the full-time housewives' labor varies depending on the methods of estimation. However, all estimated values exceed the average value assigned to the housewives by the National Pension Corporation. It is clear that full-time housewives' unpaid labor contributes a great deal to the formation of household property and wealth, which is a valid reason for Pension Sharing and Credit Splitting. This article also provides logical factors to consider in the process of Pension Sharing and Credit Splitting, which can be used for developing computerized software to determine a full-time housewives' labor value at the time of divorce or for any other purpose.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.107-117
• /
• 2019

Because shipbuilding is single-product production with limited resources, production management technology is essential to manage the resources effectively and maximize the productivity of ship-process. Therefore, many shipbuilding companies are conducting research on ship production plan and process considering various constraints in the field by applying modeling and simulation. However, it is difficult to provide accurate production plan on sudden schedule and process changes, and to understand the interconnectivity between the processes that produce blocks in existing research. In addition, there are many differences between the production planning and field planning because detailed processes and quantity of blocks can not be considered. In this research, we propose the integrated process-based modeling method considering process-operation sequences, BOM(Bill of materials) and resource constraints of all the scheduled blocks in the indoor system. Through the integrated process-based model, it is easy for the user to grasp the assembly relationship, workspace and preliminary relationship of assembly process between the blocks in indoor system. Also, it is possible to obtain the overall production plan that maximizes resource efficiency without the separate simulation and resource modeling procedures because resource balancing that considers the amount of resource quantity shared in the indoor system is carried out.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.2
• /
• pp.137-145
• /
• 2020

Various elements of Fabrication (FAB), mass production of existing products, new product development and process improvement evaluation might increase the complexity of production process when products are produced at the same time. As a result, complex production operation makes it difficult to predict production capacity of facilities. In this environment, production forecasting is the basic information used for production plan, preventive maintenance, yield management, and new product development. In this paper, we tried to develop a multiple linear regression analysis model in order to improve the existing production capacity forecasting method, which is to estimate production capacity by using a simple trend analysis during short time periods. Specifically, we defined overall equipment effectiveness of facility as a performance measure to represent production capacity. Then, we considered the production capacities of interrelated facilities in the FAB production process during past several weeks as independent regression variables in order to reflect the impact of facility maintenance cycles and production sequences. By applying variable selection methods and selecting only some significant variables, we developed a multiple linear regression forecasting model. Through a numerical experiment, we showed the superiority of the proposed method by obtaining the mean residual error of 3.98%, and improving the previous one by 7.9%.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.642-642
• /
• 2003