• 방사성폐기물학회지
• /
• 제19권4호
• /
• pp.447-457
• /
• 2021

Graphite Isotope Ratio Method (GIRM) can be used to estimate plutonium production in a graphite-moderated reactor. This study presents verification results for the GIRM combined with a 3-D polynomial regression function to estimate cumulative plutonium production in a graphite-moderated reactor. Using the 3-D Monte-Carlo method, verification was done by comparing the cumulative plutonium production with the GIRM. The GIRM can estimate plutonium production for specific sampling points using a function that is based on an isotope ratio of impurity elements. In this study, the ¹⁰B/¹¹B isotope ratio was chosen and calculated for sampling points. Then, 3-D polynomial regression was used to derive a function that represents a whole core cumulative plutonium production map. To verify the accuracy of the GIRM with polynomial regression, the reference value of plutonium production was calculated using a Monte-Carlo code, MCS, up to 4250 days of depletion. Moreover, the amount of plutonium produced in certain axial layers and fuel pins at 1250, 2250, and 3250 days of depletion was obtained and used for additional verification. As a result, the difference in the total cumulative plutonium production based on the MCS and GIRM results was found below 3.1% with regard to the root mean square (RMS) error.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.464-480
• /
• 2007

There are several methods for the hydrogen production such as steam reforming of natural gas, photochemical method, biological method, electrolysis and thermochemical method, etc. These days it has been widely studied for the hydrogen production method having low hydrogen production cost and high efficiency. In this paper, patents in the hydrogen production by steam reforming of natural gas were gathered and analyzed. The search range was limited in the open patents of USA(US), European Union(EP), Japan(JP), and Korea(KR) from 1996 to 2006. Patents were gathered by using key-words searching and extracted by filtering criteria. The trends of the patents was analyzed by the years, countries, companies, and technologies.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.95-108
• /
• 2007

There are several methods for the hydrogen production such as steam reforming of natural gas, photocatalytic method, biological method, electrolysis and thermochemical method, etc. These days it has been widely studying for the hydrogen production method having low hydrogen production cost and high efficiency. In this paper, patents in the hydrogen production by water electrolysis were gathered and analyzed. The search range was limited in the open patents of USA(US), European Union(EP), Japan(JP), and Korea(KR) from 1996 to 2005. Patents were gathered by using key-words searching and filtered by filtering criteria. The trends of the patents was analyzed by the years, countries, companies, and technologies.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.48-54
• /
• 2010

S plastic injection molding factory located at Namdong Industrial Complex in Incheon produces plastic parts for semiconductor, vacuum cleaners, office furniture, etc. It produces the parts to customers' order and delivers them directly to customers at due dates using the trucks of freight company. In recent years, it has been suffered from the excessive production cost, high lost sales rate, rigid response to customers' order, and high delivery cost, which affect negatively on its profit. This paper introduces a case study on the profit increase through a newly proposed production and distribution method which applies a make-to-stock and multi-visit delivery strategy at S plastic injection molding factory. The proposed method is evaluated by comparing with the current method with respect to sales profit using the historical data of customer demand. It is confirmed through the computational experiments that the proposed production and distribution method yields almost double increase in profit resulted from the increased production, reduced lost sales, reduced production cost, and reduced delivery cost.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1288-1294
• /
• 2022

Hydrogen as an environmentally friendly energy carrier has received special attention to solving uncertainty about the presence of renewable energy and its dependence on time and weather conditions. This material can be prepared from different sources and in various ways. In previous studies, fossil fuels have been used in hydrogen production, but due to several limitations, especially the limitation of the access to this material in the not-too-distant future and the great problem of greenhouse gas emissions during hydrogen production methods. New methods based on renewable and green energy sources as energy drivers of hydrogen production have been considered. In these methods, water or biomass materials are used as the raw material for hydrogen production. In this article, after a brief review of different hydrogen production methods concerning the required raw material, these methods are examined and ranked from different aspects of economic, social, environmental, and energy and exergy analysis sustainability. In the following, the current position of hydrogen production is discussed. Finally, according to the introduced methods, their advantages, and disadvantages, solar electrolysis as a method of hydrogen production on a small scale and hydrogen production by thermochemical method on a large scale are introduced as the preferred methods.

• 가족자원경영과 정책
• /
• 제17권2호
• /
• pp.55-74
• /
• 2013

This research developed standardized satellite accounts for household production to measure the entire production in Korea using representative Korean data. This study utilized standardized methods for measuring the expenditure and consumption of expendable supplies as an element of intermediate goods in household production. The results of this research can be summarized as follows. First, the total value of household production in Korea in 2009 turned was 268 trillion won, which would be 10.16% of the GDP, based on using the method of replacement by specialty for estimating the value of housework, while it was 356 trillion won, which would be 13.5% of the GDP (2,636 trillion won), based on the method of opportunity cost. Second, the economic value of labor invested in household production was 220 trillion won when using the data from 12 main corresponding wages in the market, while it was 203 trillion won when using the method of total replacement, which used the wages of housekeepers, and 290 trillion won when using the method of opportunity cost in measuring the value of housework labor. Third, in estimating the proportion by section in terms of the total value of household production, the portion of labor in household production was measured from 76% to 82%, depending on the methods used, which is the most significant section. These results indicate that housework has the characteristics of labor-centered work. On the other hand, the value of expenditure on and consumption of expendable supplies, as one element of intermediate goods, is 63 trillion won, which is 17.7% (using the method of opportunity cost in measuring the labor of housework) of household production. Also, the value of capital goods, as the other element of intermediate goods is 2.3 trillion won, which is 0.9% (using the method of opportunity cost) of household production. In conclusion, as an element of household production, housework labor was higher in household production than expenditures on expendables, especially for cooking, cleaning, and caring for children. In the future, people should be cautious about estimating that the amount of household work could be reduced, as women's labor in the market and the household work produced by the market will increase.

• Industrial Engineering and Management Systems
• /
• 제14권4호
• /
• pp.401-412
• /
• 2015

In this paper, we present a modeling approach to production planning for an actual production line and a heuristic method. We also illustrate the successful implementation of the proposed method on the production line. A heuristic algorithm called the push-back algorithm was designed for a single machine earliness/tardiness production planning with distinct due date. It was developed by combining a minimum slack time rule and shortest processing time rule with a push-back procedure. The results of a numerical experiment on the heuristic's performance are presented in comparison with the results of IBM ILOG CPLEX. The proposed algorithm was applied to an actual case of production planning at Woongjin Chemical, a leading manufacturer of filter products in South Korea. The seven-month execution of our algorithm led to a 24.5% decrease in the company's inventory level, thus demonstrating its practicality and effectiveness.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.92-93
• /
• 2014

Green Frame is a method for Rahmen structure construction composed of composite PC members. The composite PC members of Green Frame which are based on in-situ production can reduce the construction cost and are more likely to secure quality when compared to production in factories. Previous studies developed forms for in-situ production of Green Frame composite PC members and proposed algorithms to arrange them on site. However, it requires not only their arrangement, but also calculation of an accurate production period to produce the required PC members in a limited space and supply them in a timely manner. In particular, it is necessary to clearly define the properties of detailed processes for in-situ production of PC members and to calculate the time required for respective process. To do so, this study is a basic research on calculating the time for in-situ production using a linear scheduling method.

• The Korean Journal of Ecology
• /
• 제2권1호
• /
• pp.25-30
• /
• 1978

The flower production in the Castanea crenata forest in Gapyong was investigated, by applying litter trap and allometric method. Among serveral variables, DBH is the most reliable one but the estimated value by DBH showed remarkable difference from the value obtained by the litter trap method. Litter trap showed 149.3 kg of flower production per ha in the Castane crenata forest. And the F/L ratro increased with the itme until flowers began to fall. The variation of flower production among trees by allometric method seems to be unreliable.

• Journal of Microbiology and Biotechnology
• /
• 제21권1호
• /
• pp.100-108
• /
• 2011

A method for the rapid detection and quantification of Newcastle disease virus (NDV) produced in an animal cell culture-based production system was developed to enhance the speed of the NDV vaccine manufacturing process. A SYBR Green I-based real-time RT-PCR was designed with a conventional, inexpensive RT-PCR kit targeting the F gene of the NDV LaSota strain. The method developed in this study was validated for specificity, accuracy, precision, linearity, limit of detection (LOD), limit of quantification (LOQ), and robustness. The validation results satisfied the predetermined acceptance criteria. The validated method was used to quantify virus samples produced in an animal cell culture-based production system. The method was able to quantify the NDV samples from mid- or late-production phases, but not effective on samples from the early-production phase. For comparison with other quantifiable methods, immunoblotting, plaque assay, and tissue culture infectious dose 50 ($TCID_{50}$) assay were also performed with the NDV samples. The results demonstrated that the real-time RT-PCR method is suitable for the rapid quantification of virus particles produced in an animal cell-culture-based production system irrespective of viral infectivity.