• Membrane and Water Treatment
• /
• v.11 no.5
• /
• pp.363-374
• /
• 2020

Membrane distillation (MD) is a process used for water desalination. However, its commercialization is still hindered by its increased specific cost of production. In this work, several process configurations comprising Direct Contact and Permeate Gap distillation membrane units (PGMD/DCMD) were investigated to maximize the production rate and consequently reduce the specific water cost. The analysis was based on a cost model and an experimentally validated MD model. It was revealed that the best achievable water cost was approximately 5.1 $/㎥ with a production rate of 8000 ㎥/y. This cost can be further decreased to approximately 2 $/㎥ only if the heating and cooling energies are free of cost. Therefore, it is necessary to decrease the MD capital investment to produce pure water at economical prices.

• IE interfaces
• /
• v.6 no.2
• /
• pp.37-51
• /
• 1993

This paper studies the economic replacement method for production facilities which requires huge investment but are necessary for higher productivity and competability of products. That is, the general models for the decision of economic life of properties which minimizes the total costs throughout the usage life(Life cycle costs) are generated. Main factors which make influences for the decision of econmic life can be divided by three. These are the change of salvage value, repair and maintenance costs, and availability of production facilities with the passage of usage time. In this paper, the real world data for these three factors are collected and analyzed for the extraction of representative standard forms with the passage of time. And general models for economic replacement methods and optimal usage terms are presented through tables with the combination of the standard forms of these three main factors.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.421-432
• /
• 2003

The dies & molds are a very economical production tool and a high value-added product because of its mass production capability compared to other production methods. Due to the very stiff international competitiveness, the industries meet many obstacles. For the promotion of the industry, the status and the international trends of the industry are measured. The vision and strategy are driven. In Korea, large portion of dies and molds are still low value-added and make large number of tools. In order to advance this industry to the high-tech area and gain competitiveness in the global marketplaces, effective means of resource investment and strategy should be properly provided.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.77-108
• /
• 1992

Many economists and policymakers regard the ratio of R&D investment to GNP to be a good indicator of a nation's technological capabilities. Consequently, their major policy recommendation to promote technological development is a rapid expansion in R&D investment. However, a low R&D ratio does not necessarily mean less efforts at technological advancement since the composition of technologies to be developed varies depending upon the stage of economic development. Technology policy to improve the international competitiveness of domestic industries should be based on the stage of economic development and present technological status rather than on a simple comparison with advanced countries. At Korea's stage of development, maximizing the efficiency of R&D investment is more important than enlarging the size of the investment. Strategic alliances between domestic firms and foreign enterprises should be encouraged to save time and costs involved in acquiring new technologies and learning how to use them. The government should establish institutional devices to stimulate private enterprises to internationalize their business activities such as R&D, production, and marketing. The government should also promote the development of domestic and international R&D networks, which can serve as the infrastructure for technological innovations.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.77-81
• /
• 2019

Recently, Korea has been making efforts at the government level to overcome the national crisis that Japan's dependency on technology in the semiconductor and display materials sectors has also escaped due to export regulations on three materials carried out by Japan. Therefore, based on the data of the National Science & Technology Information Service (NTIS) operated by the government, we analyze the trend of R & D investment in the display field, thereby improving R & D to improve material technology competitiveness in the future. Let's examine the implications of investment. A total of 5 years of new research and development investment in the field of display was invested as basic research fund for 25%, 15% for applied research, and 53% for development research. In terms of development cost and development period, the basic research showed that the amount of money and the development period were shorter than that of applied research. In other words, the basic research accounted for 25% of the R & D investment and the average R & D period was only 3.2 years. As we can see from the recent development of H fiber carbon fiber, which was recently developed and entered full-scale production, we were able to succeed because of the benefits of government support for 10 years while giving the same material title differently. In order to escape from Japan's technological dependence on semiconductor and display materials in Korea, As such, basic research in the field of materials is only possible when long-term research is conducted.

• Management & Information Systems Review
• /
• v.32 no.1
• /
• pp.135-151
• /
• 2013

The study has been carried out to understand productivity-related factors that have been connected to improve financial independence rate of national university hospital. In order to achieve such research purpose as working out implications of efficient resource management, data from the four years between 2007 to 2010 of 12 national university hospitals were reviewed. According to the results, the hospitals came up with significant differences in Value Added to Total Asset, Value Added to Tangible Fixed Assets, Value Added to Personnel Expenses and Value Added Ratio to Patient Revenues. In addition, after the relation between the investment efficiency and profitability of the national university hospitals was investigated, it was learned that application of basic environmental factors would have an influence on a profitability index Operating Margin. As long as the basic environmental factors are adopted, Operating Margin of the national university hospitals is improved under the condition that the Value Added to Tangible Fixed Assets for Production and the Value Added to Personnel Expenses gets higher but the Value Added Ratio to Patient Revenues gets lowered.

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.45-65
• /
• 2020

It is desirable to invest in wine that increases its value, but wine investment itself is unfamiliar in Korea. Also, the process itself is unreasonable, and information is often forged, because pricing in the wine market is done by a small number of people. With the right solution, however, the wine market can be a desirable investment destination in that the longer one invests, the higher one can expect. Also, it is expected that the domestic wine consumption market will expand through the steady increase in domestic wine imports. This study presents the consortium block chain framework for revitalizing the wine market and enhancing transparency as the "right solution" of the nation's wine investment market. Blockchain governance can compensate for the shortcomings of the wine market because it guarantees desirable decision-making rights and accountability. Because the data stored in the block chain can be checked by consumers, it reduces the likelihood of counterfeit wine appearing and complements the process of unreasonably priced. In addition, digitization of assets resolves low cash liquidity and saves money and time throughout the supply chain through smart contracts, lowering entry barriers to wine investment. In particular, if the governance of the block chain is composed of 'chateau-distributor-investor' through consortium blockchains, it can create a desirable wine market. The production process is stored in the block chain to secure production costs, set a reasonable launch price, and efficiently operate the distribution system by storing the distribution process in the block chain, and forecast the amount of orders for futures trading. Finally, investors make rational decisions by viewing all of these data. The study presented a new perspective on alternative investment in that ownership can be treated like a share. We also look forward to the simplification of food import procedures and the formation of trust within the wine industry by presenting a framework for wine-owned sales. In future studies, we would like to expand the framework to study the areas to be applied.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.537-557
• /
• 2005

The estimate on volatility of stock price is related with optimum of portfolio and Important for allocation of capital asset. If the volatility of stock price is varied according to macroeconomic variables on monetary policy and industrial production, it will assist capital asset to allocate. This paper is related with stock market volatilities on macroeconomic variables in U.S. and Europe, Korea. And, it Is pertain to vary in time of this variables. Thus, this paper is related with volatilities of monetary and physical macroeconomic variables on basis of statistics. And, it is ranged front capital investment to portfolio allocation. Also, this paper takes out of sample forecast and study more after this. In case Germany, France, Italy and the Netherlands, the relative importance of monetary policy and Industrial production Is different from these countries. In case Italy and the Netherlands, monetary policy is primary factor at stabilizing for volatility of stock price. In case Korea, increasing monetary policy and industrial production is positively affected stock market. It is that the positive effect of stock price is caused by mollifying monetary policy and economic growth. Specially, this conclusion is similar to US. In Korea, gradual increase in monetary and industrial production is necessary to stability of stock market. It is different to previous results on basis of increasing stock price of money in long period.

• KSBB Journal
• /
• v.11 no.6
• /
• pp.704-711
• /
• 1996

An optimal process design of a foreign protein production system was carried out using a bioprocess flowsheeting software, BioPro Designer, with a capability of economic analysis. The flowsheeting program was applied to a production system of the tailspike protein of Salmonella phage P22, and helped save time and efforts in selecting an optimal process. A wild type tailspike and two types of mutant tailspikes, tsf G244\longrightarrow,R and Su A334\longrightarrowV, were considered in this study to show that the folding characteristics of foreign protein produced inside host influenced the selection of the best production system. An optimal production system for mature tailspike was chosen under the criterion of capital investment per unit mass of mature protein recovered.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.3
• /
• pp.558-586
• /
• 2010

This paper analyze the economic effect of R&D investment for the IT Green growth initiatives in Korea, relating to Green growth which is main force for activating in order to durable growth currently. The IT green growth initiatives can be grouped by IT manufacture, IT service, and S/W and computer-related services in the R&D investment and to be analyzed by the RAS forecasting methods. The results indicate that the production-inducing effect is about 31,853 billion won for the IT manufacture, and IT service is about 14,360 billion won, and the next is S/W and computer-related service whose effect is about 4,482 billion won. The import, value added, and employment effect of IT manufacture is also bigger than those of any other sectors in IT. This is because R&D investment in case of IT manufacture is more huge than IT service. Besides, employment-inducing effects show that IT manufacture is highest in 16,596 persons; IT service is secondly highest in 9,000 persons and S/W; lastly, computer-related service is much lower than those of any other sector. So we can conjecture that the long-term initiatives of IT green growth implementation lead to increasing size of benefits in the IT sectors.