• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1042-1045
• /
• 2009

The Food is very important in our life, And the agricultural products are one of the most important food materials. For buying it, it's hard for the consumer to trust the agricultural products. That this reason, why they can't easily get the product information about agricultural productions. If you can get it, It is only mark of information about The country of production, They can not get reliable informations such as Producers, productions, residual pesticides, and soil conditions, etc. Accordingly, When consumers buy these agricultural productions, They want to provide reliable information. In this paper, using an RFID(Radio-Frequency IDentification) reader who reads RFID TAG attached to products. Then, Acquired Certification Number sent to a web server. To get the Production informations and Safety Inspection Information. The way that consumers can trust the Agricultural Products. These Traceability systems were implemented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.616-623
• /
• 2012

Turbopump is a key component in liquid rocket engines, and reducing weight while maintaining structural safety is one of the major concerns of turbopump designers. To reduce the weight aluminium alloy castings instead of steel casings are introduced. The casting process is especially useful for enhancement of productivity and for reduction of product costs. But, since castings are used in space vehicle engines, reliability cannot be compromised therefore proper design, production process and thorough investigation should be performed to ensure structural integrity. In this study inlet casings for a fuel pump are casted with A356.0-T6 alloy and using one of them a burst test is conducted to ensure structural integrity. Structural analysis is performed for simulation, and with multiple strain gages strains are measured and compared with predictions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.41-58
• /
• 2000

Recently the harmfulness of W radiation is in creasing due to encironmental pollution. Environmental population may also play a role in global decrease of ozone layer, A major consequence of ozone depletion is increase in solar ultra violet radiation received at the earth's surface excessive exposure to W radiation cause a lot of problems in our skin. Plant extract that possess antioxidative activities has been reported to retard the oxidation process in product to which they have been added. Plant are alived under solar light. So it is expect the plants have so many protection mechanisms and UV absorbent ingredients against ultra violet radiation such as UVB, UVA. Plant extract which were flavonoids, alkaloids and others could be transformed into UV absorber by chemical modification. Therefore with the aim of finding alternative natural absorber that can safely be used in cosmetic, we have screened various extract for their UV absorbent effect. Thus, the cosmetic safety against human skin, antimicrobial effects and others could be improved by using the silicon.

• Transactions of Materials Processing
• /
• v.30 no.6
• /
• pp.291-300
• /
• 2021

Currently, starting with electric vehicles, the application of ultra-high-strength steel sheets and light metals has expanded to improve mileage by reducing vehicle weight. At a time when internal combustion engine vehicles are rapidly changing to electric vehicles, the application of ultra-high-strength steel is expanding to satisfy both weight reductions and the performance safety of the chassis parts. There is an urgent need to improve the quality of parts without defects. It is particularly difficult to estimate the part formability through the finite element method (FEM) in the burring operation, so product design has been based on the hole expansion ratio (HER) and experience. In this study, design of experiment (DOE), analysis of variance (ANOVA), and regression analysis were combined to optimize the formability by adjusting the process variables affecting the burring formability of ultra-high-strength steel parts. The optimal variables were derived by analyzing the influence of variables and the correlation between the variables through FE analysis. Finally, the optimized process parameters were verified by comparing experiment with simulation. As for the main influence of each process variable, the initial hole diameter of the piercing process and the shape height of the preforming process had the greatest effects on burring formability, while the effect of a lower round of punching in the burring process was the least. Moreover, as the diameter of the initial hole increased, the thickness reduction rate in the burring part decreased, and the final burring height increased as the shape height during preforming increased.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.138-144
• /
• 2021

In the electronic component assembly business, when product defects occur, it is important to track incoming raw material defects or work defects, and it is important to improve suppliers or work sites according to the results. The core task of the smart factory is to build an integrated data hub to process storage, management, and analysis in real time, and to manage cluster processes, energy, environment, and safety. In order to improve reliability through accurate analysis and collection of production data by real-time monitoring of production site management for electronic parts-related small and medium-sized enterprises (SMEs), the establishment of a smart factory is essential. This paper was developed to be utilized in the construction by defining the system configuration method, smart factory-related technology and application cases, considering the characteristics of SMEs related to electronic components that want to introduce a smart factory.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.5
• /
• pp.79-94
• /
• 2021

Despite the importance of the supply chain risk due to the negative word-of-mouth (NWOM) in social media, related research is insufficient. Thus, this study analyzes how the NWOM of the product is distributed through social media and the characteristics of the distributor based on social exchange theory. For this purpose, we collected information on car recalls from four companies using Twitter from the National Highway Traffic Safety Administration (NHTSA). Based on the Seed Tweet, a Re-Tweet (RT) network was constructed to examine the distribution and spread of NWOM, and regression analysis was performed to test the hypothesis. As a result, it was confirmed that NWOM is a small world network structure that spreads around hub users connected to many users. Moreover, it was found that the more interactive and reciprocal relations the first distributor has, the greater the speed and scale of distribution of NWOM.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.578-583
• /
• 2021

This paper describes acceleration tests for reliability of semiconductors. It also describes AEC-Q100, international test standard for reliability of automotive semiconductors. Semiconductors can be used for dozens of years. So acceleration tests are essential to test potential problems over whole period of product where test time is minimized by applying intensive stresses. AEC-Q100 is a typical acceleration test in automotive semiconductors, and it is designed to find various failures in semiconductors and to analyze their causes of occurance. So it finds many problems in design and fabrication as well as it predicts lifetime and reliability of semiconductors. AEC-Q100 consists of 7 test groups such as accelerated environmental stress tests, accelerated lifetime simulation tests, package assembly integrity tests, die fabrication reliability tests, electrical verification tests, defect screening tests, and cavity package integrity tests. It has 4 grades from grade 0 to grade 3 based on operational temperature. AEC-Q101, Q102, Q103, Q104, and Q200 are applied to discrete semiconductors, optoelectronic semiconductors, sensors, multichip modules, and passive components, respectively.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.1
• /
• pp.9-16
• /
• 2021

The present study was conducted to accomplish management efficiency by preparing preemptive measures for consumer dissatisfaction and overcome risks caused by Global Warming through studies of model cases in packaging. Through this study, we made it possible to find a way for companies to prepare for Global warming and consumer dissatisfaction. By contributing to eco-friendly packaging, we are trying to preemptively respond to recent major issues through packaging. Through this experiment, we tried to measure the degree of penetration of Plodia interpunctella H. larva into the insect repellent film produced by printing Ink containing a natural repellent. The control experiment was conducted with an untreated LDPE film to which no insect repellent was applied. The numbers decreased from 17 to 7 when the film was processed with repellent to show experimental results verifying effects of repellent by decrease in 10 (58.8% Decrease). Such results show that it is safe when the film is unfolded but in the case where the film is folded, the Plodia interpunctella H. punches through the film to lead to consumer dissatisfaction and it suggests that this can bring on risks to corporate management. Considering that most of the film is folded in the case of PE bag packaging, the direction which the corporations should take in terms of preparing for climate change countermeasures and consumer dissatisfaction has been clarified. Due to it receiving satisfactory results in safety rest results for printing film applied with pest repellent as well as the Quality analysis to test repellent contents of repellent film, it is certain that the importance of repellent method in packaging will increase in preparing for consumer dissatisfaction and actions against climate change henceforth.

• Journal of the Korean Society of Food Culture
• /
• v.36 no.3
• /
• pp.300-307
• /
• 2021

In this study, consumers' perception and consumption behavior of blended tea were investigated. Also, consumer perception of Siberian chrysanthemum, consumption behavior, and awareness of efficacy were investigated. As a result of the survey, it was confirmed that it was necessary to develop a blended tea with taste and flavor characteristics that consumers prefer, having the capability of relieving stress, and preventing cold or respiratory disease. In addition, the degree of recognition of Siberian chrysanthemum was very low, and the recognition of the efficacy appeared in the order of 'cold relief' and 'respiratory disease relief'. Factor analysis results, safety attributes, health attributes, product attributes, marketing attributes, and sensory attributes were factorized into five factors, and after analysis, it was concluded that the sensory attributes of taste and aftertaste were considered the most important. Consumers surveyed appeared to consume blended tea for 'relieving mood or stress relief', to enjoy the taste, and to prevent cold or respiratory diseases. Siberian chrysanthemum displays efficacy in cold relief and relief of respiratory diseases. Therefore, developing Siberian chrysanthemum as a blended tea could be a practical application that can expand the range of its use, making it more popular and increase its commercial applications.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.365-372
• /
• 2018

The use of CT examinations is increasing rapidly and radiation dose from CT examinations is much higher than other diagnostic radiography examinations including general radiography and mammography. DRLs used to optimize the radiation dose of patients by diagnostic radiology in each country. The objective of this study was to investigate and to analyze the status of DRLs from CT examinations in domestic and other countries. In other countries, DRLs were set for each age group and each examination considering the medical situation of each country. In Korea, DRLs were set for adults and children in 2017. For adults, DRLs were set for 13 examinations. Reported DLP values were 1119, 297, $472mGy{\cdot}cm$ for head, chest and abdomen pelvis examination, respectively. For children, DRLs were set for head examinations. Reported DLP values were 298 (0~1 years), 404 (2~5 years), 494 (6~10 years), 1,088 (11~15 years) $mGy{\cdot}cm$. DRLs of Korea were similar to other countries for head examinations. For chest examinations and abdomen pelvis examinations were relatively lower than other countries. As a major reason for relatively low radiation dose, it is considered to contribute the activity and management of medical radiation safety at national level.