• Design & Manufacturing
• /
• 제13권3호
• /
• pp.35-40
• /
• 2019

As the consumer market in the cosmetic, vehicle manufacturing and aerospace industries grows, the demand for manufacturing industries using on injection mold technology. Also, such manufacturing technology of metal machining is expensive, and the shape is limited. Cosmetic cushion fact products are divided into outer relevant to the exterior of the product and inner containers containing the actual contents. In the case of the inner container, it needs to be combined with the upper and lower cases. As environmental regulations are strengthened internationally, the use of a large number of component parts can result in significant losses in recycling and economics. Therefore, this study aims to perform injection molding analysis through injection molding simulation to develop a cushion fact container that can be recycled through the unification of products and materials using polypropylene to cope with environmental regulations. In the case of injection molding conditions, Injection Time(sec): 4.5, Cooling Time(sec): 13, Resin Temperature($^{\circ}C$): 240, and Pressure(MPa): 30 were determined. The results of injection molding simulation according to the two design methods were compared with the sync mark which shows the problem of filling and injection molding.

• 한국태양에너지학회 논문집
• /
• 제28권4호
• /
• pp.10-16
• /
• 2008

The fire resistance of thermal insulation and interior finishing materials is recently much emphasized after the fire accident at the Icheon Cold Store in January 2008. Three kinds of thermal insulation are used in buildings. They are Organic, Non-organic and cellulosic insulation. Organic insulation such as polystyrene foam board and urethane foam has high thermal resistance but it has no fire resistance. While non-organic insulation such as rockwool and glassfiber has high fire resistance, it has lower thermal resistance than organic insulation. Cellulose insulation is primarily manufactured from recycled newsprint or cardboard using shredders and fiberizers. Despite of its environmental friendliness and high thermal resistivity, its domestic use has not much increased because of the prejudice that paper can easily burn. However, the cellulose insulation as a product is about 80 wt.% cellulosic fiber and 20 wt.% chemicals, most of which are fire retardants such as boric acid and ammonium sulfate. It is required to secure its fire safety for more consumption as a building insulation in Korea. Therefore, this study investigates the fire resistance of Korean cellulose insulation according to the rate of fire retardant and finally presents the optimum rate of fire retardant in cellulose as building insulation. The fire safety test was conducted according to the ASTM C 1485-00. The test results indicate that above 18 wt% of fire retardant is necessary to secure the fire safety of cellulose insulation.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.596-599
• /
• 2007

전동차 내장패널에 대한 비교전과정평가를 실시하였다. ISO14044 표준과 에코인디케이터 99 방법론, SimaPro 7.0 software, Ecoinvent DB를 이용하여 전과정목록 DB를 구축하고 LCA를 수행하였다. 전동차 내장패널의 환경성 측면에 대한 일반적인 예상에 대하여 LCA를 통한 검증을 수행하였다. 전동차 내장패널의 중량이 환경성과 상관이 있음에도 불구하고 상대적 중요도는 높지 않았으며, Al 내장패널의 경우 사용단계의 환경영향이 가장 큼에도 불구하고 타 재질 내장패널에 비해 제작단계의 환경영향이 주요환경이슈로 도출되었다. Al 내장패널의 경우, 재활용으로 인한 환경편익이 크나, 장기적으로는 제작단계의 환경영향을 저감하여야 타 재질 대비 환경성 측면의 경쟁력을 강화할 수 있다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제4권1호
• /
• pp.21-32
• /
• 2019

Eggshell is a waste material after the usage of egg. In this work, biowaste chicken eggshells were used for preparing carbonated hydroxyapatite (HA) nanoparticles of high purity through aqueous precipitation method at room temperature. The eggshell-derived HA will be a cost-effective bioceramics for biomedical applications and an effective material-recycling technology. Additionally, mulberry leaf extract was used as a template to regulate the morphology, size and crystallinity of HA, and the effects of pH value were also examined. Characterization of the samples was performed by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. Scanning electron microscopy (SEM) was used to determine the size, shape and morphology of HA. The results indicate that only one phase of HA were synthesized in the both absence and presence of mulberry leaf extract at pH of 7 and above, while DCPD or DCPA/DCPD phase was observed at pH 4 condition. The crystallite sizes of the HA samples obviously decreased when adding mulberry leaf extract as a template, while they decreased gradually as the solution pH levels increased. With increasing pH level from 7 to 14, the rod-like HA nanoparticles gradually changed to spherical shape at pH 14. Note that, the obtained product is Mg and Sr containing A- and B-type carbonate HA at alkaline pH and it can be a potential material for biomedical applications.

• 한국포장학회지
• /
• 제24권3호
• /
• pp.131-140
• /
• 2018

전세계적으로 환경문제가 심각하게 대두되면서 선진국의 바이오 플라스틱 공급업체들은 재활용 규제와 이에 따른 소비자의 관심으로 친환경 포장재의 수요를 불러일으킬 것으로 전망하였다. 세계 각국의 환경 정책은 1순위 감량, 2순위 재활용, 3순위 재사용은 동일하고, 4순위로 분해성 재질 적용의 순서이다. 바이오 플라스틱 업체 등은 이러한 환경문제에 대응하기 위해 사탕수수, 옥수수와 같은 식물체를 활용해 여러 형태의 바이오 플라스틱을 출시해왔으며, 국내 업체들에서도 점차 이에 대한 관심을 높여가고 있다. 최근의 환경문제를 해결하기 위하여 바이오 플라스틱에 대한 산업적인 관심이 증가하고 있다. 기존의 바이오 플라스틱은 낮은 기계적 물성과 비싼 제조비용 문제가 단점으로 지적되어 왔으나, 석유 유래 플라스틱의 대안으로써, 바이오 플라스틱은 현재 단점을 해결하여 다양한 제품으로 개발되어 적용되고 있다. 바이오 플라스틱의 활발한 보급을 위해서, 세계 각국은 인증마크와 표준 제도를 운영하고 있으며, 본 총설에서는 최근의 국내외 바이오 플라스틱 규제현황, 인증 마크 및 식별 표시 동향에 대해 정리하였다.

• 한국농공학회논문집
• /
• 제61권1호
• /
• pp.85-93
• /
• 2019

The objective of this study is to assess the environmental effect of the reclaimed land drainage method using oyster shell through the Life cycle $CO_2$ assessment, and to evaluate the applicability in South Korea. In this Study, the life cycle $CO_2$ emissions of oyster shell (OS) and crushed stone (CS, as avoided product) were assessed and compared. The Life Cycle Assessment method was used for quantitative evaluation of direct or indirect environmental effects of OS recycling. $CO_2$ was selected as the evaluation target material, and the scope of assessment includes the acquisition of materials, processing, transportation, construction phases. Compared to using CS, 77.0% of $CO_2$ emissions in acquisition and processing, 47.0% in transportation and 6.5% in construction phase were reduced, respectively by using of OS. The maximum transportation distance of OS was estimated according to transportation distance of CS. OS has environmental advantages than CS within about 26 - 101 km from the source. OS was found to be applicable to reclaimed lands up to 810 ha, 3,910 ha from Tongyeong and Yeosu, respectively. In addition, the amount of OS that could be used as drainage material for reclaimed land was much higher than annual OS production of South Korea. Therefore, it is considered that OS is sufficient to be used as drainage material for reclaimed land in South Korea.

• 복식문화연구
• /
• 제29권5호
• /
• pp.679-693
• /
• 2021

The aim of this study was first to expand participation types in the field of beauty design by examining activities in the field, and second, to seek practical methods for addressing the important issue of social responsibility amid the current pandemic situation. Accordingly, social responsibility in design was examined through a review of previous studies. The features of practice domains and design performance fields were examined comparatively. As a result, it was found that social practices take place in various sectors, with sensibility toward the environment being escalated to a new level in the cosmetics industry. In terms of cosmetics enterprise practices, collecting, recycling, manufacturing, and retail networking has been established to reuse up to 95% of waste resources. Furthermore, ethical responsibility and participation concerning product and service waste resources are recommended, resulting in the supply of eco-friendly products in a virtuous cycle. In terms of systematic policy, even component transformation (such as organic certification and excluding toxic substances) is being carried out. However, it was difficult to identify such responsible activities in Korea; thus, systematic practice is needed. Designers take part in talent donation activities, and it was the sector they prefer the most. However, it is necessary to conduct studies on limitations such as venues equipped with cosmetics procedure equipment and public cosmetics sanitation and make systematic improvement, such that activities can be led with initiative from passive participation.

• 한국환경농학회지
• /
• 제39권4호
• /
• pp.289-296
• /
• 2020

BACKGROUND: There is a need for a revolutionary method to overcome the problem of biochar, which has relatively low adsorption capacity for existing anion pollutants, along with collectively recycling fallen leaves, a kind of forest by-product. Therefore, the objective of this study was to prepare iron-decorated biochar derived from fallen leaves (Fe-FLB), and to evaluate their adsorption properties to Congo red (CR) as anionic dye. METHODS AND RESULTS: The adsorption properties of CR by fallen leaves biochar (FLB) and Fe-FLB were performed under various conditions such as initial CR concentration, reaction time, pH and dosage with isotherm and kinetic models. In this study, Fe-FLB prepared through iron impregnation and pyrolysis of fallen leaves contained 56.9% carbon and 6.3% iron. Congo red adsorption by FLB and Fe-FLB was well described by Langmuir model and pseudo second order model and the maximum adsorption capacities of FLB and Fe-FLB were 1.1 mg/g and 25.6 mg/g, respectively. In particular, it was found that the adsorption of CR was occurred by chemical adsorption process by the outer boundary layer of Fe-FLB. CONCLUSION: Overall, the production of Fe-FLB using fallen leaves and using it as an anion adsorbent is considered to be a way to overcome the problem of biochar with relatively low anion adsorption in addition to the reduction effect of waste.

• 한국컴퓨터정보학회논문지
• /
• 제25권12호
• /
• pp.299-303
• /
• 2020

현재 전기로 산화슬래그는 그 특성상 대부분 성토용 또는 도로용으로 사용되고 있다. 전기로 산화슬래그는 현행 법령상 순환골재가 아닌 산업부산물에 해당되고 있으나 기술의 발전으로 전기로 산화슬래그의 단점이 점차 해소되고 있으며 국내 외 연구 및 기술현황에 비추어 전기로 산화슬래그는 골재로 활용하기 충분하다고 한다. 그러나 전기로 산화슬래그 관련 현행 규범은 재활용 용도만 규정하고 있을 뿐 이에 대한 구체적인 규정을 두고 있지 않다는 점에서 시공 및 적용 확대에 어려움이 존재하고 있다. 따라서 전기로 산화슬래그를 활용할 수 있도록 제도적인 보완 마련이 필요하다. 이에 본 연구에서는 전기로 산화슬래그 관련 법·제도를 검토 및 순환골재 관련 법령과 해당 여부를 살펴보고 그에 대한 개선방안을 제시하고자 한다.

• 한국건설순환자원학회논문집
• /
• 제9권1호
• /
• pp.58-65
• /
• 2021

본 연구에서는 순환유동층 보일러 애쉬의 재활용 가능성을 높이기 위한 방법으로, 경량기포콘크리트의 제조시 생석회 및 황산칼슘 성분이 필요하다는 점에 착안하여, 이를 생석회 및 석고의 대체재로 활용하여, 생산원가 절감, 자원재활용, 환경부하 저감 및 고부가가치화 등의 목표를 달성하고자 하였다. 다양한 배합설계를 도출하여 경량기포 콘크리트 물성을 평가하였고, 이를 바탕으로 실제 공장에서 시제품을 생산하여, 경량 기포 콘크리트의 제조에 순환유동층 보일러애쉬의 활용성을 검증하고자 하였다. 실험 결과에 따르면, 순환유동층 보일러애쉬를 슬러리로 선처리하여 활용하는 방법을 통해 석고를 CFBCA로 대체 가능한 것이 확인되었으며, 이를 통해 경쟁력 있는 경량기포 콘크리트 제품의 생산이 가능함을 보였다.