• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.412-420
• /
• 2005

The integration of CAD and CAM is critical for computer aided process planning. Recently, STEP has been emerged and utilized as a product data exchange standard format in CAD/CAM areas. The assembly information consists of assembly component relations, assembly features, assembly directions and mating conditions. The purpose of this study is to develop an efficient algorithm to extract assembly information directly from the STEP based files and to generate automatically assembly process plan from the extracted assembly features. The developed algorithms will generate assembly information codes for STEP(AICS). The results from this study can be a reasonable link between design and manufacturing for developing better CAAPP(Computer-Aided Assembly Process Planning) systems.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3163-3165
• /
• 2000

In code division multiple access systems using all-optical signal processing, the optical multiple access interference by simultaneous multiple users degrades the system performance and eventually can limit the number of active users. To reduce the effect of the interference, error-correction codes are used in 2-dimensional FO-CDMA systems. In this paper we propose a method of applying product code to 2-dimensional FO-CDMA systems. The proposed coding scheme can correct a random error and burst errors with small redundancy to the conventional case. In result we show significant performance enhancement of the system in terms of HER, the number of active users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3C
• /
• pp.322-328
• /
• 2009

This paper proposes new simplified sum-product (SSP) decoding algorithm to improve BER performance for low-density parity-check codes. The proposed SSP algorithm can replace multiplications and divisions with additions and subtractions without extra computations. In addition, the proposed SSP algorithm can simplify both the In[tanh(x)] and tanh-1 [exp(x)] by using two quantization tables which can reduce tremendous computational complexity. Moreover, the simulation results show that the proposed SSP algorithm can improve about $0.3\;{\sim}\;0.8\;dB$ of BER performance compared with the existing modified sum-product algorithms.

• Journal of Internet Computing and Services
• /
• v.6 no.4
• /
• pp.21-35
• /
• 2005

Software product-lines is the software development paradigm to attain the rapid development of quality applications by customizing the reconfigurable components and composing them based on predefined software architectures. Recently various methodologies for the component-based product lines are proposed, but these don't provide the specific implementation techniques of the components in terms of variability resolution mechanism. In other hand, the several approaches to implement the component supporting the variabilities resolution are developed, but these don't define the systematic analysis and design method considering the variabilities from the initial phase. This paper proposes the integration of PLUS, the one of product line methodologies extending UML modeling, and component code generation technique in order to increase the efficiency of producing the specific product in the software product lines. In this paper, the component has the hierarchical architecture consisting of the implementation elements, and each implementation elements are implemented as XSLT scripts. The codes of the components are generated from the feature selection. Using the microwave oven product lines as case study, the development process for the reconfigurable components supporting the automatic variability resolution is described.

• Korean Journal of Mathematics
• /
• v.9 no.2
• /
• pp.129-131
• /
• 2001

Let $q=p^{e1}_1{\cdots}p^{em}_m$ be the product of distinct prime elements. In this short paper, we show that the largest value of M such that there exists an ($n$, M, $n-1$) $q$-ary code is $q^2$ if $n-1{\leq}p^{ei}_i$ for all $i$.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.166-170
• /
• 1998

Classification and Coding(C&C) systems as a core of design information management have been accomplished by many studies in terms of design and manufacturing attribute based on Group Technology. Those are very difficult to apply in make-to-order(MTO) manufacturing because the environment of MTO has various characteristics of product, many licensors, engineering change, insufficiency of integrated management system for codes and so on. This paper presents a suitable C&C system to MTO manufacturing which consider management level and drawing.

• The Research Journal of the Costume Culture
• /
• v.15 no.1 s.66
• /
• pp.1-12
• /
• 2007

The purpose of this study is to identify the SPA(Specialty store retailer of Private label Apparel) characteristics and product supply process of Korean casual apparel brands. The research was conducted by questionnaire surveys to 63 casual apparel brands. SPA characteristics of each brand were measured with four SPA characteristic indices: short product supply cycle, spacious retail floor, single brand retail store, and low product price compared to the quality of the product. The 63 apparel brands were grouped by SPA index score. The brands belonged to group H had high index score and brands in group L had low index score. The results of this study showed that the most of the casual apparel brands' products were sold at department stores, especially the brands belonged to group L greatly depended on department stores. Few apparel brands have spacious retail floor. The retail product price of the brands belonged to group H was low price while the product price of the brands belonged to group L was in the medium-high price. The supply time of the new products was short in general. The most brands supplied new styles to the retail floor within 1 to 3 weeks. The information technology was heavily used. The brands belonged to group H highly used information technology including bar codes system, pas data analysis, and inventory control system. The current style trends were analyzed with street fashion and feedback from the shop managers.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.87-96
• /
• 1996

IGES is a file format which has gained widespread use but has certain limitations such as limited information coverage and ambiguous definitions. In order to overcome the limitations of existing neutral file formats, STEP has been developed as a more comprehensive mechanism for product data exchange by ISO. This paper describes a file translation system between IGES and STEP. In this system, three EXPRESS schemata are defined for IGES, STEP and the translation relationship between IGES and STEP. Object codes are generated from the schemata and linked with file access libraries to IGES and STEP files. The translation was verified by visualization and reverse translation. The system developed in this study can easily applied to translate other file formats because the file structure and translation relationship are defined in EXPRESS - a high level information modeling language.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.643-652
• /
• 2009

This paper presents brief history and a state-of-the-art survey of Life Cycle Cost (LCC) analysis, in particular LCC analysis in the Urban Transit Vehicle, based on a internationl codes and standards related to LCC analysis. A main objective of the LCC analysis is to quantify the total cost of ownership of a product throughout its full life cycle, which includes research and development, construction, operation and maintenance, and disposal. The predicted LCC is useful information for decision making in purchasing a product, in optimizing design, in scheduling maintenance, or in planning overhaul. This paper presents a LCC procedure consisting of seven steps, which are "Problems definition", "Cost elements definition", "System modeling", "Data collection", "Cost profile development", "Evaluation", and "Verification". Sub-activities to be encompassed in the seven steps procedure are described.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.91-98
• /
• 2014

The purpose of this research is to investigate optimum machining conditions to improve the quality of die using the CAD/CAM system(Power Shape/Power Mill) and 3D printing. Surface roughness is widely used as an index for processing degree of accuracy. The Power Shape was used to model the shape of product. And the model shape is confirmed by 3D printing system(BFB-3000). Also, tool path and NC-codes were generated using Power Mill. Finally, the product was cut using CNC machine(NBS-2025). The cutting time and surface roughness were measured by measuring instrument. And then this process was repeated by changing the conditions to find optimal machining conditions. The surface roughness behavior with regard to specific factors were analyzed. Through this study, the optimal machining condition can be obtained.