• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.958-965
• /
• 2003

Structural integrity of either a passenger car or a light truck is one of the basic requirements for a full vehicle engineering and development program. The results of the vehicle product performance are measured in terms of ride and handling, durability, noise/vibration/harshness (NVH), crashworthiness and occupant safety. The level of performance of a vehicle directly affects the marketability, profitability and, most importantly, the future of the automobile manufacturer In this study, we used the virtual proving ground (VPG) approach for obtaining the dynamic characteristics. The VPG approach uses a nonlinear dynamic finite element code (LS-DYNA3D) which expands the application boundary outside the classic linear static assumptions. The VPG approach also uses realistic boundary conditions of tire/road surface interactions. To verify the predicted dynamic results, a single lane change test has been performed. The prediction results were compared with the experimental results, and the feasibility of the integrated CAE analysis methodology was verified.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.627-630
• /
• 1996

One of the most common communication mechanisms to describe a situation or a process is a story written as an ordered sequence of events or activities. For example, a shop floor supervisor may present the operations of his manufacturing system by describing the processes of manunfacturing a product in his shop. Although IDEF3 is one of the most commonly used methods for describing a business process, but it is not common for a manufacturing process. In this study, we tried to apply IDEF3 for describing a manufacturing process. Problems and suggestions such as selection probability, programmable process modeling, manufacturing resource model were presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1345-1348
• /
• 2003

The Ferrule for the Optical Communication Connector is the product to set the optical ares of an optical fiber very precisely. Therefore, it is required high expectations such as high dimensional precision and new including flaws. Up to new the optical instrument has been used for the defeat and shape inspection of the ferrule, but in the paper we examined the detectable defeat and expectation by using Resonant Ultrasound Spectroscopy(RUS). The RUS is the measurement which is to excite specimen and to inspect the difference at natural frequency pattern between acceptable specimen and specimen which has some defeats. We analyzed the difference of natural frequency pattern in the experiment using Spectrum Analyzer. And we compared the results in the experiment with those in the simulation from the explicit finite elements code, Nastran.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.695-702
• /
• 2001

In this paper, the drop/impact simulation for a mobile phone has been carried out with the explicit code LS-DYNA and its validation has been experimentally verified. The small size of this kind of electronics products makes it time-consuming, and difficult to conduct drop tests to detect the failure mechanism and identify their drop behaviors. Strict drop/impact performance criteria of such hand held electronic products as mobile phones play an important role in their design because these products must withstand both normal and unexpected shock. Usually, the product durability on drop impact depends on designers experience. The present reliable methodology of drop/impact simulation provides an efficient and powerful vehicle to improve the design quality and reduce the design period.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.348-352
• /
• 1992

At present, the manufacturing industry is in a process of great change of circumstances like meeting demands to involve a great variety of types and shorter product life and thus more flexible manufacturing. These changes cause the larger number of different tools and frequent tool changes, which lead to the considerable losses in productive time and the high amount of capital tied up in the tool area. In our country, for the most part, the individual tool are still being presetted according to a data sheet and the measured values are entered, output in a list manually or via punched tapes. This usually takes a considerable amount time and lead to a high error rate. This paper describes a computer controlled tool data management system combined with the bar code tool identification labeled on cutting tools.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.300-301
• /
• 2000

DVD는 CD사이즈의 광디스크에 고화질기 MPEG2 디지털 압축동화를 두 시간이상 수록할 수 있는 기록 및 재생기기로써 최초의 규격서가 1996년 8월에 발행되었다. 650nm의 적색반도체레이저와 개구수 0.6의 대물렌즈를 채용한 광픽업으로 직경 12cm의 단면디스크에 CD-ROM의 약 7배인 4.7GB에서 17GB까지의 용량저장이 가능하다. 변조방식은, DC성분을 억제할 수 있고, 또한 DR(Density Ratio)이 큰 EFM-Plus 변조를 채용하고, 에러정정방식은 32kB를 하나의 블록으로 하는 Reed Solomon Product code이다. File system은, 음성, 화상데이터와 컴퓨터 데이터를 통합할 수 있도록 계층구조로 하고, ISO9669 파일시스템과 UDF파일시스템을 함께 사용하고 있다. (중략)

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.31-36
• /
• 1997

Various methods of finite element modeling for welded part are examined and the stamping simulation of automotive body is presented by using the explicit finite element code PAM-STAMPTM. The process of stamping simulation is suggested step by step, and then the gravity, binder wrap, forming, trimming and springback of front door inner are analyzed. It shows good agreements with real product in the aspects of deformed shape and failure area. The door inner with laser-tailor welded blank is simulated, in which deformed shape, movement of welde line and formability are predicted.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.240-245
• /
• 2006

Viterbi decoder is composed of BMU(Branch metric Unit), ACSU(Add Compare Select Unit), and SMU(Survivor path Memory Unit). For high speed viterbi decoders, ACSU is the main bottleneck due to the compare-select and feedback operation. Thus, many studies have been advanced to solve the problem. For example, M-step look ahead technique and Minimized method are typical high speed algorithms. In this paper, we designed a bit-level ACSU(K=3, R=1/2, 4bit soft decision) based on those algorithms and switched the matrix product order in the backward direction of Minimized method so as to apply Code-Optimized-Array in order to reduce the area complexity. For experimentation, we synthesized our design by using SYNOPSYS Design compiler, with TSMC 0.18 um library, and verified the timing by using CADENCE verilog-XL.

• 보험의학회지
• /
• 제26권
• /
• pp.41-53
• /
• 2007

In the course of insurance claim administration, medical experts' opinions are called medical claim reviews. They are classified into two main categories: medical verification and counsel for claim staff. Medical verification compare between product coverage and the insured's physical condition. Medical counsel for claim staff is advice for claim staff when they have a question about medical knowledge to make a claim decision. A common example of medical verification is insurance coding of pituitary apoplexy. Some clinicians have insisted that the ICD coding of pituitary apoplexy is l63 of cerebral infarction, but the exclusion criteria of I code show that neoplasm is coded as C00 to D48. Thus, pituitary apoplexy must be coded as D33. An example of medical counsel for claim staff is interpretation of some medical conditions. It is divided into UCR(usual, customary, and reasonable) assessment, assessment of causality, and so on. Disability evaluation is another subject of medical counsel for claim staff. The final claim decision must be made by claim staff because only the claim staff have the authority of claim decision. Medical claims review is only an expert's opinion.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.840-844
• /
• 2003

A study for increase of fan flow rate by geometric modification has been conducted to decrease temperature rise of marine generator inner part. Through experiment of a real product, a performance curve for various flow resistances was obtained. Flow analyses for each cases were done by using commercial code-FLUENT and the results were very similar to experimental data (0.7% deviation at normal operating condition). Through flow analysis results for various design geometric modification, a scroll type fan was adopted as a best design geometry with 100Pa more pressure and 22% more flow rate than original fan.