• 한국산업융합학회 논문집
• /
• 제17권2호
• /
• pp.77-83
• /
• 2014

This paper describes a new technology to develop the character recognition technology based on pattern recognition for non-contacting inspection optical lens slant or precision parts, and including external form state of lens or electronic parts for the performance verification, this development can achieve badness finding. And, establish to existing reflex data because inputting surface badness degree of scratch's standard specification condition directly, and error designed to distinguish from product more than schedule error to badness product by normalcy product within schedule extent after calculate the error comparing actuality measurement reflex data and standard reflex data mutually. Developed system to smallest 1 pixel unit though measuring is possible 1 pixel as $37{\mu}m{\times}37{\mu}m$ ($0.1369{\times}10-4mm^2$) the accuracy to $1.5{\times}10-4mm$ minutely measuring is possible performance verification and trust ability through an experiment prove.

• 한국산업융합학회 논문집
• /
• 제16권4호
• /
• pp.113-117
• /
• 2013

This paper describes a new technology to develop the character recognition technology based on pattern recognition for non-contacting inspection optical lens slant or precision parts, and including external form state of lens or electronic parts for the performance verification, this development can achieve badness finding. And, establish to existing reflex data because inputting surface badness degree of scratch's standard specification condition directly, and error designed to distinguish from product more than schedule error to badness product by normalcy product within schedule extent after calculate the error comparing actuality measurement reflex data and standard reflex data mutually. Developed system to smallest 1 pixel unit though measuring is possible 1 pixel as $37{\mu}m{\times}37{\mu}m$ ($0.1369{\times}10-4mm^2$) the accuracy to $1.5{\times}10-4mm$ minutely measuring is possible performance verification and trust ability through an experiment prove.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.77-81
• /
• 2001

Burn-in is a test procedure to find and eliminate the inherent initial failure of a product during or at the final stage of production process. Software testing is the validation and verification process which is used to cut off the faults from a software. The two have the common function and objective of "debugging". This article summarizes some significant models on the optimal hardware and software burn-in time, and provides the relevant paper lists. The need for the development of the unified burn-in policy of a hardware-software system is addressed.addressed.

• 로봇학회논문지
• /
• 제18권4호
• /
• pp.472-480
• /
• 2023

This paper describes the development of a test-equipment for the pre-verification of navigation performance in cluster-based AUVs (Autonomous Underwater Vehicle). In the development of an AUV, conducting hardware and software development sequentially is not efficient due to the limited research and development period. Therefore, in order to reduce the overall development time and achieve successful development results, it is essential to pre-validate the navigation system and navigation algorithms. Accordingly, this paper explains the test-equipment for pre-verification of navigation performance, and ultimately confirms the stability of the navigation system and the performance of the navigation algorithms through the analysis of five types of navigation sensor data stored during real-sea experiments. The results demonstrate that through the development and verification of the test-equipment, it is possible to shorten the overall development period and improvement of product quality in the process of developing multiple AUVs.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.97-104
• /
• 2007

In this paper, we have proposed an integrated aircraft development environment which can support virtual design and development for Systems Engineering and IPPD(Integrated Product and Process Development). We have also proposed the ViMS(Virtual Mockup System) which can perform a system design review on an integrated aircraft development environment. The ViMS is an integrated virtual design support system with immersive design review functionality to make a virtual mockup instead of a physical mockup through the virtual reality technology. The functionality of the ViMS consists design data management, design technology, design verification, and design assessment. We have described the detailed development artifact, case studies and conclusions of using the ViMS functionality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.3-10
• /
• 2002

In this study on machine measuring system based on solid feature was developed. This system was applied with injection mold using 3 dimensional solid modeler for verification. Developed program include pre-processor, main processor, and post processor. In pre-processor there are functions which check intersection, simulate motion of probe and calculate measuring time. Main processor generates measuring path and output NC code in Unigraphics. In post-processor functions that include evaluation of undercut or overcut and display of measuring procedure are offered. In addition analysis module for quality control of measured data on manufactured product was developed with geometric and dimensional tolerance concept. As the result developed program could get stability of system, precision of product, rapidity and cost down of manufacturing process compared with before measuring process.

• 한국산업융합학회 논문집
• /
• 제18권4호
• /
• pp.241-249
• /
• 2015

The purpose of this research is to develop the pattern recognition algorithm based on smart camera for inspection automation, and including external surface state of molding parts or optical parts. By performance verification, this development can be applied to establish for existing reflex data because inputting surface badness degree of scratch's standard specification condition directly. And it is pdssible to distinguish from schedule error of badness product and normalcy product within schedule extent after calculating the error comparing actuality measurement reflex data and standard reflex data mutually. The proposed technology cab be applied to test for masearing of the smallest 10 pixel unit. It is illustrated the relibility pf proposed technology by an experiment.

• 대한기계학회논문집A
• /
• 제31권6호
• /
• pp.635-643
• /
• 2007

As many engineers and technicians are involved in the design process of large scale and/or complex products, there are a lot of miss matches and interferences due to designers' faults and several kinds of CAD systems. Recently, CAD systems are applied to verify and check the assembly process. Digital Mock-Up(DMU) system, a tool to build a virtual mock-up in the design stage, has been used to prevent the interferences and miss matches during precision design processes. Using the virtual assembly tool, engineers are able to design precision and interference free parts without physical mock-ups. Instead of a single CAD source, several CAD systems are used to design a complex product. Several organizations are involved in the distributed design environment for heterogeneous multi-CAD assembly. XML and the lightweight CAD file are proposed for the multi-CAD assembly. XML data contains hierarchy of the heterogenenous multi-CAD assembly. STEP PDM schema and STEP ISO 10303-28 formations are applied to construct the XML data. The lightweight CAD file produced from various CAD files through ACIS kernel and InterOp not only contains mesn, B-Rep and topological data, but also is used to visualize CAD data and to verify dimensions. Developed system is executed on the desktop computers. It does not require commercial CAD systems to visualize 3D assembly data. Real-time interference and fitness checks, dimensional verification, and design and assembly verification are performed on the developed system. Assembly of heterogeneous models for a car is conducted to verify the effectiveness of the developed DMU system on the Internet.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.99-108
• /
• 2007

As the structure of a mobile phone becomes thin to catch up with a slim product trend, the reliability of a LCD module is on the rise as a big issue for a product design. A drop test is the most basic and important verification method for a mechanical quality control but it requires much time and cost during a product development process. Thus many manufacturers have considered design guide lines using CAE and simulation for more effective usage of limited resources on the market. In this paper, the Maximum Principle Stress of a LCD glass panel is calculated on the basis of explicit FE Analyses method and input conditions are determined according to the general test standard. The design guideline for reliability improvements are suggested on the basis of the results of FE Analysis.

• Journal of Platform Technology
• /
• 제10권3호
• /
• pp.21-29
• /
• 2022

Recently, the scope of the smart factory has been expanded, and process research to minimize the part that requires manpower in many processes is increasing. In the case of detecting defects in the appearance of small products, precise verification using a vision system is required. Reliability and speed of inspection are inefficient for human inspection. In this paper, we propose an algorithm for inspecting product appearance defects using a machine vision system. In the case of the remote control targeted in this paper, the appearance is different for each product. Due to the characteristics of the remote control product, the data obtained using two cameras is compared with the master data after denoising and stitching steps are completed. When the algorithm presented in this paper is used, it is possible to detect defects in a shorter time and more accurately compared to the existing human inspection.