• Title/Summary/Keyword: Product Safety Review

Search Result 136, Processing Time 0.021 seconds

A Study on Dispute Resolution and Policy Problem in the Drone Logistics Industry (드론 물류산업의 분쟁해결과 정책적 과제)

  • Park, Jong-Sam
    • Journal of Arbitration Studies
    • /
    • v.26 no.4
    • /
    • pp.151-179
    • /
    • 2016
  • Emerging as a strategic domain of the service industry, the drone logistics industry is evolving into a zero effort industry, which realizes smart device service ranging from corporate services to daily customer services. The role of the drone industry is becoming increasingly important in strengthening national competitiveness, as well as corporate competitiveness, beyond the strengthening of product competitiveness. Although drones have various strengths and weaknesses for industries, there are plenty of possibilities for diverse disputes and conflicts due to lack of related laws, regulations, and institutional norms, as well as unsolved problems related to technologies and operations; that is, there are still policy tasks and problems to be solved such as unauthorized seizure of drones, hacking, protection of personal privacy, safety concerns, regulation and limitation of flying areas, damage relief, and dispute settlements. Thus, in order to vitalize the drone industry as a future growth engine while responding to the changes in the environment of the drone industry in Korea and overseas and to strengthen national and corporate competitiveness by harmonizing with advanced management innovations, it is necessary to conduct in-depth discussions and review policy issues related to the vitalization of the drone industry. Therefore, the purpose of this study is to review the domestic and overseas realities and statuses of the drone logistics industry and application cases, analyze policies regarding the drone logistics industry of each country, review general theories on the solution of disputes arising out of the transactions in the drone logistics industry, and, as a conclusion, suggest desirable policy issues for the vitalization of the drone logistics industry in Korea.

Review of National Diagnostic Reference Levels for Interventional Procedures

  • Lee, Min Young;Kwon, Jae;Ryu, Gang Woo;Kim, Ki Hoon;Nam, Hyung Woo;Kim, Kwang Pyo
    • Progress in Medical Physics
    • /
    • v.30 no.4
    • /
    • pp.75-88
    • /
    • 2019
  • Diagnostic reference level (DRL) is employed to optimize the radiation doses of patients. The objective of this study is to review the DRLs for interventional procedures in Korea and abroad. Literature review was performed to investigate radiation dose index and measurement methodology commonly used in DRL determination. Dose area product (DAP) and fluoroscopy time within each major procedure category were systematically abstracted and analyzed. A wide variation was found in the radiation dose. The DAP values and fluoroscopy times ranged 0.01-3,081 Gy·㎠ and 2-16,878 seconds for all the interventional procedures, 8.5-1,679 Gy·㎠ and 32-5,775 seconds for the transcatheter arterial chemoembolization (TACE), and 0.1-686 Gy·㎠ and 16-6,636 seconds for the transfemoral cerebral angiography (TFCA), respectively. The DRL values of the DAP and fluoroscopy time were 238 Gy·㎠ and 1,224 seconds for the TACE and 189 Gy·㎠ and 686 seconds for the TFCA, respectively. Generally, the DRLs of Korea were lower than those of other developed countries, except for the percutaneous transluminal angioplasty with stent in arteries of the lower extremity (LE PTA and stent), aneurysm coil embolization, and Hickman insertion procedures. The wide variation in the radiation doses of the different procedures suggests that more attention must be paid to reduce unnecessary radiation exposure from medical imaging. Furthermore, periodic nationwide survey of medical radiation exposures is necessary to optimize the patient dose for radiation protection, which will ultimately contribute to patient dose reduction and radiological safety.

A Taxonomy of the Common Tasks and the Development of a Risk Index for Physical Load Assessment in Nursing Job

  • Ryoo, Jang Jin;Lee, Kyung-Sun;Koo, Jung-Wan
    • Safety and Health at Work
    • /
    • v.11 no.3
    • /
    • pp.335-346
    • /
    • 2020
  • Background: Nursing service is a nonroutine work with an excessive physical load and diverse tasks. This study derived representative common tasks based on the frequently occurring tasks with a high physical load in the nursing workers' daily work and developed indicators to evaluate the work risk by reflecting the characteristics of nonroutine work. Methods: Common tasks were classified through the following stages: literature review, first focus group interview (FGI) with experts, first classification of common tasks, second FGI with hospital health managers, a survey of nursing service workers, and the final classification of common tasks for each task type. To develop an objective risk index for physical load assessment, we investigated the frequency and duration of the derived common tasks via survey. Results: Nursing common tasks were categorized into six task types and 56 subtasks. To evaluate the risks of various tasks in nonroutine works, three frequencies and three working time levels were defined by examining the task frequency and working hours. Exposure time was defined to reflect the characteristics of a nonroutine job. The final risk assessment was the product of the exposure time level and job intensity level. From this, four risk action levels were derived. Conclusion: This study has the advantage of solving the problem of focusing on some tasks in evaluating the physical load. It was meaningful in that a new risk assessment index based on exposure time was proposed based on the development of an evaluation scale for frequency and time by reflecting the characteristics of nonroutine work.

Korean Customer Attitudes Towards SNS Shopping

  • Cho, Young-Sang;Heo, Jeong-Yoon;Youn, Myoung-Kil
    • Journal of Distribution Science
    • /
    • v.10 no.8
    • /
    • pp.7-14
    • /
    • 2012
  • As a new format of retailing, social shopping on SNS has rapidly grown in recent. Although there is much literature associated with customer behaviours in the academic world, little attention has been paid to identifying the shopping patterns of SNS shoppers. This paper will, thus, identify how perceived value has an impact on the buying intention of SNS shoppers, after illustrating what kind of factor influences the formation process of perceived value in the Korean marketplace. Given that SNS shoppers are for the most part 20s as well as 30s, the authors handed out questionnaires to them. Furthermore, based on literature review results, the conceptualised research model was developed. Despite lack of literature, the authors developed five constructs like price reduction, quantity- and time-limited message, product ranges, information-sharing, and required number of shoppers. The researchers made a considerable effort to identify the relationship between research concepts and each variable, based on a few research analysis methods such as frequency analysis, the Varimax rotation technique used orthogonal rotation, Cronbach's Alpha, PCA (Principle Component Analysis), and the like. Amongst the 5 variables used to measure the degree of influences on the perceived value as a social shopping characteristic, it has been evident that price cut, required minimum shoppers, product variety, and information-sharing have a positive impact on the perceived value formation processes of SNS customers. Also, this research implies that SNS retailers can differentiate themselves from other retailers by differently using the above factors. From a practitioner's point of view, these factors should be strategically used to increase the social shopping opportunities of SNS users. It is, furthermore, evident that the perceived value formed by the above 4 factors have played an important role in the buying decision process of SNS customers. In a sense, whether customers are aware of higher price cut rates, information-sharing, required minimum shoppers, and product variety has a positive impact on making buying decisions. From a retailer's point of view, online shopping mall operators are able to use blog as well as twitter to improve the buying intention as a marketing tool of social network, because the business activities provided by social shopping retailers, like the rapid, accurate responses to customer requirements, the provision of a variety of information, and the communications between customers are closely related to buying intentions. There are a few research limitations to conduct this empirical research. It was not easy to review prior papers, due to its lack. In spite of the increasing number of SNS shoppers in Korea, little research attention has been paid to this kind of research topic by academicians, because buying products or services through SNS is in its infancy. With regard to research populations, it would be difficult to generalise the research findings in Korea, owing to unbalanced respondent distribution. Considering the above research limitations as well as the growth of social shopping, many authors should pay considerable attention to SNS-related issues in the future, and develop the more sophisticated criteria to measure the characteristics of SNS shoppers.

  • PDF

Structural Safety Evaluation for the Hydraulic Power Unit of Topside Module According to the Movement of Offshore Plant (해양구조물 움직임에 따른 Topside Module의 HPU에 대한 구조안전성 평가)

  • Ryu, Bo-Rim;Lee, Jin-Uk;Kang, Ho-Keun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.26 no.6
    • /
    • pp.723-731
    • /
    • 2020
  • The design of offshore plants should reflect the various requirements of the owner and the classification society. For a topside module mounted on an of shore structure, the design process is very demanding because of the large spatial constraints and the many requirements related to marine environmental conditions and safety such as the movement of the structure. In this study, the load acting on the hydraulic power unit, which is one of the main equipment in the topside module, was calculated according to the DNVGL rule; the structural safety was evaluated according to each load condition and the structural reliability of the developed product was improved. For structural analysis, MSC software was used, and structural analysis was performed under five load conditions to review structural safety for various movements. The results show that the maximum stress occurred during pitching toward the stern (Load Case 5). The stress level was approximately 85 % of the allowable stress, and the maximum deformation was approximately 5 % of the allowable value. The structural safety was confirmed, and no intermember interference occurred.

A Basic Study on the Performance Improvement of Safety Certification Standards (안전인증기준 성능화에 대한 기반 연구)

  • Byeon, Jung-Hwan;Kim, Jung-Gon
    • Journal of the Society of Disaster Information
    • /
    • v.17 no.3
    • /
    • pp.487-499
    • /
    • 2021
  • Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

Development and Evaluation of an Impulsive Force Test Method for Wearable Airbags (착용형 에어백의 충격력 시험 방법개발 및 평가)

  • Park, Jin-O;Kim, Young-Jin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.3
    • /
    • pp.597-602
    • /
    • 2021
  • Even in the era of the 4th industrial revolution, the prevention of industrial accidents is still an important issue in industrial sites. In solving the problem of industrial safety, a product can be difficult to market if there is a lack of standard or method for a reliable performance evaluation. The purpose of this study was to develop and evaluate a test method for a wearable airbag product for protecting the body from falls that was newly developed to respond to fall accidents in industrial sites. As a research method, reliable evaluation standards were developed and applied through four stages of the evaluation and development process (Step 1: Product review, Step 2: Data research, Step 3: Expert meeting, Step 4: Drawing evaluation standard). In addition, the impact force was evaluated according to the developed evaluation standard. The fall impact force obtained through the evaluation showed a reduction effect of approximately 96% compared to the existing impact force. Therefore, the fall impact force was reduced significantly when the airbag was applied. This will enable new convergence products to be launched on the market and produce an environment where industrial workers can work safely.

A Defect Prevention Model based on SW-FMEA (SW-FMEA 기반의 결함 예방 모델)

  • Kim Hyo-Young;Han Hyuk-Soo
    • Journal of KIISE:Software and Applications
    • /
    • v.33 no.7
    • /
    • pp.605-614
    • /
    • 2006
  • The success of a software development project can be determined by the use of QCD. And as a software's size and complexity increase, the importance of early quality assurance rises. Therefore, more effort should be given to prevention, as opposed to correction. In order to provide a framework for the prevention of defects, defect detection activities such as peer review and testing, along with analysis of previous defects, is required. This entails a systematization and use of quality data from previous development efforts. FMEA, which is utilized for system safety assurance, can be applied as a means of software defect prevention. SW-FMEA (Software Failure Mode Effect Analysis) attempts to prevent defects by predicting likely defects. Presently, it has been applied to requirement analysis and design. SW-FMEA utilizes measured data from development activities, and can be used for defect prevention on both the development and management sides, for example, in planning, analysis, design, peer reviews, testing, risk management, and so forth. This research discusses about related methodology and proposes defect prevention model based on SW-FMEA. Proposed model is extended SW-FMEA that focuses on system analysis and design. The model not only supports verification and validation effectively, but is useful for reducing defect detection.

A study on the organization and management of the Jeju soybean cluster (제주 콩 클러스터 구축 방안에 관한 연구)

  • Ko, Seong-Bo;Hyun, Chang-Seok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.10
    • /
    • pp.3740-3746
    • /
    • 2010
  • Jeju soybean industry is not competitive in areas of food-safety, quality, price, and bargaining power. Also, the processing products of soybean are simply-processed product. They are short of diversified product. The size of processing company is very small. The purpose of this study is to review and suggest programs for the construction and management of a network among farmhouseholds, agricultural cooperatives, manufacturing companies, related research institutes, and the local government, which are integrated vertically, horizontally and systematically. Jeju soybean cluster consists of production system, research & development system, industrial-support system, practical technology-support system, and center of operation. This system will help farmers get stable sales market & income. Also, It will help farmers produce the production of environment-friendly agricultural raw products.

A Study on the Registration of Patent and Utility Models by Fashion Firms in Korea -Focus on IPC A41B and A41D- (패션기업의 특허.실용신안 등록현황에 관한 연구 -IPC분류코드 A41B와 A41D를 중심으로-)

  • Kim, Yong-Ju
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.35 no.2
    • /
    • pp.192-205
    • /
    • 2011
  • This study analyzed the registration of patent and utility models by fashion firms in Korea. A total of 2,291 registration cases of IPC A41B-H from the period of 1996 to 2009 were collected by KIPRIS of the Korean Intellectual Property Organization (KIPO). All cases were analyzed by year to review the longitudinal trend and 481 cases of IPC A41B (shirts, underwear, baby linen, and handkerchiefs) and 1088 cases of IPC A41D (outerwear, protective garments, and accessories) were analyzed by content (provided benefit type and developing method), by detailed product items and the characteristics of the applicant. The results of this study were as follows: 1) Registration of IPC 41 increased steeply by the year (especially since 2006) and the patent registrations increased more than those in the utility model. 2) Analyzing the application content of A41B on the basis of benefit showed that 75% were to provide new functions and the rest were for health. In terms of the developing method, 83% of benefit provided by the application were by design development, 11.2% were by material, and the rest was by process, In the cases of IPC A41D, 23.6% were for safety and protection. In terms of the developing method, the process and material development were more frequently adopted than in the cases of A41B. 3) The major product types of A41B were socks, underwear, and infant wear, whereas gloves and parts of clothing were major items in A41D. 4) In terms of the characteristics of the applicant, registration by firms was greater for patents than for utility models and registration by foreigners increased in 2006 due to the complete opening of the retail market. 5) Fifteen universities registered for a total 57 cases and major applications were for IT related clothing or high-tech protective items.