• 대한안전경영과학회지
• /
• 제4권4호
• /
• pp.53-62
• /
• 2002

As the life standard has enhanced, food products has incomparably advanced both in quality and variety to meet the consumer's choice. Despite of high quality and variety, appropriate food safety system has not been established yet in food manufacturing. With Product Liability issuance effective on July 2002, consumers are demanding far higher food safety level than what it used to be. The food manufacturers are seeking food safety assurance system. HACCP system is a pivotal product safety system providing the infrastructure to PL. By the time in the early 1970 when HACCP was developed suitable for food, it comprised the category of Risk, in fact it was quantitative sequence system. In a preparatory phase of HACCP, decision mostly depends on the quantitative analysis. In a recent study, the introduction of Risk Analysis is being reviewed for Food Safety system. In this study, FTA, FMEA are also reviewed in comparison with HACCP which have been utilized in Safety Engineering.

• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.431-434
• /
• 2006

Due to rapid technology shifts and demand uncertainty, there is a high risk that inventoried products will become obsolete. Consequently companies have to decide capacities considering product life cycle and demand variation. In this paper, 1 will analyze previous research, and then provide taxonomy of them and propose further research directions.

• 무역학회지
• /
• 제42권1호
• /
• pp.1-25
• /
• 2017

본 논문에서는 계층화 분석법(AHP)을 활용하여 중국진출 중소·벤처기업의 경영위험요인의 중요도와 우선순위에 대하여 분석하였다. 분석 결과를 보면 제조기업의 경영위험요인의 중요도는 인건비 상승, 치열한 시장경쟁, 인사관리 문제, 재료비 상승 순으로 나타났다. 제조품목별 분석결과를 보면, 전자제품의 경우는 인건비 상승과 더불어 조세정책 변화가 주요요인으로, 화학제품은 환경보호법 강화가 중요한 요인으로, 자동차부품의 경우에는 인건비 상승외에 재료비 상승 또한 주요 위험관리요인으로 분석되었다. 중국 진출시기별로는 1990년대 진출한 기업은 치열한 시장경쟁 및 조세정책 변화가 주요 위험요인으로, 2000년대 진출한 기업의 경우 재료비 상승 등이 인건비 상승 외에 중요한 관리요인으로 분석되었다.

• 벤처창업연구
• /
• 제15권2호
• /
• pp.183-192
• /
• 2020

본 연구는 스타트업을 대상으로 앙트레프레니얼 마케팅의 성공요인을 도출하기 위해 탐색적 연구를 실시하였다. 델파이(Delphi) 분석을 통해 앙트레프레니얼 마케팅의 성공요인으로 진취성, 계산된 위험관리, 혁신성, 기회지향, 외부자원 활용, 고객집중성, 가치창출, 가격설정, 마케팅커뮤니케이션, 경로관리, 제품개발, 판매, 마케팅 정보관리 등 13개의 항목을 도출하였다. 주요 속성의 중요도와 실행도를 측정하기 위해 IPA분석을 실시하였다. 제 1사분면(좋은 성과 지속적 유지)에는 진취성, 계산된 위험관리, 기회지향, 외부자원 활용, 고객 집중성이 위치하였다. 제 2사분면(집중개선)에는 혁신성이 위치하였다. 제 3사분면(저우선 순위)에는 경로관리, 판매, 마케팅 정보관리 능력이 위치하였다. 제 4사분면(현상유지)에는 가격설정능력, 제품개발능력이 위치하였다. 이러한 결과는 스타트업에서 필요한 앙트레프레니얼 마케팅의 요인은 진취성, 계산된 위험관리, 혁신성, 기회지향, 외부자원활용, 고객집중성, 가치창출 등이며, 창업초기단계에서는 고객 중심의 기회를 탐색하고 진취성이고 혁신적인 마케팅 활동을 통해 가치를 창출하는 활동이 필요하다는 것을 알 수 있다.

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.59-70
• /
• 2012

This study compared data regarding industrial accidents and awareness level for beauty product safety for four main parts of beauty industry such as hair-care, nail-care, skin-care, and make-up. Major risk factors in beauty industry are dust, musculoskeletal disorders, and organic solvent of beauty product in order of percentage. The specific types of industrial accidents in beauty industry are mainly associated with musculoskeletal system such as cuts, sprain, and varicose vein. They are mainly compensated by personal budget. The awareness levels of chemical and heavy metal containment for beauty product by beauty industry employee were 77.2% and 59.1% respectively. Most employee confirmed only important items of labelling requirement of beauty product. Also, most employee did not understand MSDS(Materila Safety Data) for chemicals used in beauty industry. Only 38.1% of beauty industry employee has had safety education while most employee (73.6%) realized that they needed safety education. Also, safety education supervised by KOSHA(Korea Occupational Safety and Health Agency) was the most preferred. This study would be good basis for safe and healthy working environment of beauty industry employee.

• International Journal of Safety
• /
• 제9권2호
• /
• pp.22-28
• /
• 2010

This paper describes a web-based design review system as a knowledge management system relating reliability and safety system design. Since people's consciousness for safety and security become sensitive and increases the need of establishing a proactive prevention method for internal failures and relating risks in products. It also means that prevailing tacit knowledge in retired workers, in order to transform them to be easily used to support new system development, become more important. When considering safety and reliability design, at least two data sheet are necessary; Failure Modes and Effects Analyses (FMEA) and Risk Assessment (RA). These two data are practically made separately. However, it includes the concerns that a risk by failures during long-term use may not be noticed. To overcome this insufficiency, a support tool for integrating reliability evaluation and risk assessment data simultaneously is expected to be revealed. The authors have then developed a web-based design review system for reliability and safety system design. The system include various profitable functions; making FMEA and RA sheet, retrieving past data sheet for engineering change management and new product development and web-based discussion to increase the efficiency of discussion. The system is applied to one practical development works in order to demonstrate its effectiveness that is to be made clear by interviewing user's qualitative comment.

• 무역상무연구
• /
• 제35권
• /
• pp.179-219
• /
• 2007

Cross-border supply chains undergone complexity in the global trade process, unpredictability and continually evolving regulations and information requirements. Under these circumstances, longer lead time inhibiting quick response to market demands, unanticipated supply chain costs eroding product cost savings, compliance and documentation errors causing delays and fines are challenging global trade companies when they execute global business. These problems are mainly caused by unautomated, unintegrated process which lead to longer and more unpredictable lead times, slower cash flow, cost overruns, and ultimately lower profits and less satisfied customers. Complex and unpredictable global trade environment requires global trade companies of global trade management functions to automate and control this complex environment for driving out cost, time and risk from their business. Global trade management allows cost savings, supply chain efficiencies and improved compliance through improving global supply chain visibility, facilitating cash flow by supply chain financing, enhancing supply chain security and risk management.

• 시스템엔지니어링학술지
• /
• 제1권2호
• /
• pp.63-68
• /
• 2005

This study developed the planning process for technical management of engineering project applying systems engineering process in order to correctly design technical management activities early during the system development projects. The developed process describes a systemic design process of a product to be developed as well as the development process and the personnel team of project organization. As an outcome of the process implemented by a Model-Based Systems Engineering(MBSE) software, a systems engineering management plan(SEMP) and a risk management plan can easily be produced.

• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.113-125
• /
• 2013

According to 2012 OECD environmental report, Korea was ranked as the first country of water stress. Water footprint is a method to calculate water usage during the life cycle of a product from material procurement through production to disposal to recycle and to quantify the load to water resources. In water footprint calculation, water consumption unit is used. Agricultural water use is over 48% so it is urgent to mange that area Korea needs to spread the discussion about water footprint as quickly as possible, for the study to prevent social and environmental problems due to water shortage. This paper, through water footprint calculation and comparison in Chungju and Geochang areas, looks to counter measures for water risk, targeting domestically-produced apple.