• 제목/요약/키워드: Product Release

검색결과 392건 처리시간 0.03초

면역 결핍 동물모델에서 잣피 추출물의 면역조절 효과 (Immunomodulatory Effects of an Extract from Pinus koraiensis Cone Peel in LP-BM5 Murine Leukemia Viruses-Induced Murine Acquired Immune Deficiency Syndrome)

  • 김성필;권한올;하예진;허석현;이정민
    • 한국식품영양과학회지
    • /
    • 제46권9호
    • /
    • pp.1027-1034
    • /
    • 2017
  • 본 연구에서는 잣피 20% 주정 추출물을 첨가한 식이로 하여 바이러스에 감염되어 면역력이 결핍된 마우스에서 면역조절 효과를 확인하고자 T, B 세포의 증식능, Th1 type cytokine과 Th2 type cytokine, NK cell activity, phagocytic activity를 확인하였다. 바이러스로 인하여 AIDS와 유사하게 면역 결핍된 마우스 모델에서 cytokine의 불균형과 T 세포와 B 세포의 proliferation이 균형적으로 회복됨을 확인하였고 바이러스로 인해 자연살해세포와 대식세포의 활성능이 감소하였지만 잣피 20% 주정 추출물의 공급 시 활성능 회복에 도움을 주는 것을 확인하였다. 따라서 잣피 20% 주정 추출물은 LP-BM5 virus로 유도한 면역 결핍 마우스 모델에서 면역조절작용에 효능이 있음을 확인하였다.

MLSB 항생제 내성인자인 ErmSF의 N-terminal 38개 아미노산 제거가 항생제 내성 효소활성에 미치는 영향 (Effect of Truncation of 38 Amino Acids in N-terminal Region of ErmSF, a MLSB Antibiotic Resistance Factor Protein, on Enzymatic Activity)

  • 이학진;진형종
    • 미생물학회지
    • /
    • 제50권3호
    • /
    • pp.239-244
    • /
    • 2014
  • ErmSF는 macrolide 항생물질인 tylosin을 생성하는 Streptomyces fradiae가 보유한 4개의 항생제 내성인자 단백질 중 하나로 23S rRNA의 $A_{2058}$에 dimethylation 시킴으로써 항생제가 부착되는 것을 막음으로써 그 내성을 일으킨다. ErmSF는 다른 Erm 단백질과는 달리 긴 N-terminal end region을 가지고 있어서 그 역할을 알아보기 위해 1-38번째의 아미노산을 제거한 결손변이 단백질을 고안하고 대장균에서 발현하여 그 활성을 in vivo와 in vitro에서 관찰하였다. 결손변이 단백질을 발현하는 대장균은 결손에 의한 활성저하에 기인하여 야생형 단백질을 발현하는 대장균에 비하여 항생제에 대한 내성이 손상된 것을 관찰하였다. 세포 외 in vitro에서의 활성은 야생형 ErmSF에 비하여 약 20%가 손상된 것으로 나타났다. 이렇게 관찰된 활성의 저하는 결손 변이에 의한 활성화 부위에서 일어난 결손에 의한 것이라기 보다는 기질의 부착 또는 생성물의 효소에서의 이탈 과정이 손상되어서 나타나는 것으로 사료된다.

Stability Evaluation of National Reference Standards for Blood Products in Korea

  • Park, Tae Jun;Choi, Chan Woong;Oh, Ho Kyung;Kim, Jae Ok;Kim, Byung Kuk;Kang, Hyun Kyung;Kwon, Eun Jeong;Gweon, Eun Jeong;Park, Sang Jin;Kang, Ho Il;Jung, Ki Kyung;Park, Sang Mi;Kim, Ji Hye;Han, Ki Won;Jeong, Ja Young
    • Toxicological Research
    • /
    • 제33권3호
    • /
    • pp.225-231
    • /
    • 2017
  • National reference standards (NRSs) for biologics are established through potency estimation by a multi-center joint study of standard materials used in the approval process for national lot release and quality control of vaccines, blood products, and other biologics. In this study, a stability evaluation was conducted to determine whether the potency of NRSs for six blood products was being maintained at a consistent level in Korea. The present study conducted real-time stability tests via in-vivo/in-vitro bioassay on NRSs for blood coagulation factor VIII concentrate (2nd standard), antithrombin concentrate, prekallikrein activator, anti-hepatitis B immunoglobulin, blood coagulation factor IX concentrate, and anti-tetanus human immunoglobulin, as well as a trend analysis using cumulative annual results. The real-time stability test results showed that the mean potency of six NRSs was all within the control limit. In the trend analysis, the potency of NRS for blood coagulation factor VIII concentrate (2nd standard) showed a decreasing trend, while the potency of all other products had been stably maintained. The present study confirmed that the mean potency of NRSs for six blood products had been stably maintained in Korea. The findings of the present study establish a foundation that can ensure the quality of NRSs for biologics in Korea, and it is expected to make a major contribution to the supply of high-quality biologics.

고연소도 사용후 핵연료의 가열산화와 고온가열을 통한 미세조직 변화고찰 (Study of morphology on the Oxidation and the Annealing of High Burn-hp $UO_2$ Spent Fuel)

  • 김대호;방제건;양용식;송근우;이형권;권형문
    • 방사성폐기물학회지
    • /
    • 제3권4호
    • /
    • pp.301-307
    • /
    • 2005
  • 조사후 핵연료 가열(PIA장비)를 이용한 고연소도 UO2 사용후 핵연료의 산화 및 가열후 미세조직의 변화를 관찰하였다. 울진 2호기에서 한국원자력연구소 조사후시험시설로 이송된 국산 경수로용 고연소도 사용후 핵연료는 봉평균 연소도가 57,000 MWd/tU-rod avg.이였다. 본 시험에 사용된 시편은 국부연소도 65,000 MWd/tU UO2 소결체의 고형체 200 mg을 사용하였다. 본 시편을 사용후 핵 연료 가열(PIA) 시험장비를 이용하여 핫셀 내에서 3시간의 산화시험과 연속적으로 $1,400^{\circ}C$ 까지 가열하였다. 결정립경계까지의 산화를 위하여 $500^{\circ}C$에서 헬륨 50 ml, 표준공기 100 ml를 흔합한 산화분위기로 3시간을 유지하였다. 핵분열기체 방출거동을 알기위해 시험 전과정중에 85Kr의 방출량을 베타 측정기와 감마 측정기를 이용하여 실시간으로 측정 하였다. 가열시험이 종료된 후 전자주사현미경을 이용하여 미세구조의 변화를 관찰하였다. 시험결과 가열하는 동안 핵분열생성물은 UO2기지의 결정립경계와 표면으로 이동된 것을 관찰하였다. 이 시편은 환원과정을 통하여 재구조화 되었고, $5\~10\;{\mu}m$ 정도의 결정립크기를 가진 것으로 나타났다.

  • PDF

PET 병용 프리폼 사출성형에서 잔류응력과 수축 최소화를 위한 성형조건의 연구 (Investigation of the Molding Conditions to Minimize Residual Stress and Shrinkage in Injection Molded Preform of PET Bottle)

  • 조성환;홍진수;류민영
    • 폴리머
    • /
    • 제35권5호
    • /
    • pp.467-471
    • /
    • 2011
  • PET병은 프리폼(preform)을 사출성형한 후 이를 블로우 성형기에 이송시켜 블로잉하여 성형된다. 내열을 요구하는 병 즉, 주스나 곡류음료용 PET병은 목 부분(neck 또는 thread 부분)에 내열성을 부여하기 위해 프리폼 성형 후 블로잉하기 전에 목 부분을 결정화시킨다. 그러나 사출성형품에 존재하는 잔류응력이 결정화를 방해하기 때문에 프리폼 목 부분의 충분한 결정화를 위해 사출 후 프리폼을 열처리(annealing)한다. 이 열처리는 잔류응력을 해소시키기 위해서 수행하는데 사출 시 성형조건의 최적화를 통하여 잔류응력을 최소화한다면 열처리 시간을 단축시킬 수 있다. 본 논문에서는 사출 시 프리폼에 형성되는 잔류응력을 최소화하고 치수정밀도를 유지하기 위한 연구로 CAE 해석을 통하여 최적 사출조건을 제시하였다. 성형조건별 잔류응력 및 수축률의 변화를 관찰하고 이를 최소화시키는 성형조건을 찾기 위해 실험계획법을 적용하였다. 사출온도, 보압크기, 그리고 사출시간을 인자로 하여 최적의 성형조건을 결정하였다. 잔류응력에 영향을 주는 인자는 사출온도와 사출시간 순으로 나타났고 수축률에 영향을 주는 인자는 사출온도로 나타났다. 본 연구에서 결정한 최적 조건에서 최대 잔류응력, 잔류응력의 분포, 그리고 수축률이 기존 조건에 비해 각각 22%, 40%, 그리고 25% 감소하였다.

충격시험에 따른 배의 허용낙하높이 추정 (Estimation of Allowable Drop Height for Oriental Pears by Impact Tests)

  • 김만수;정현모;서륜;박일규;황용수
    • Journal of Biosystems Engineering
    • /
    • 제26권5호
    • /
    • pp.461-468
    • /
    • 2001
  • Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

  • PDF

연안 저질 SOD의 특성과 유발 영향인자에 대한 상관관계 (Correlation between Characteristics of SOD in Coastal Sewage and Predictive Factor)

  • 김범근;모하메드아케트키룰;권성현;조대철
    • 한국환경생태학회지
    • /
    • 제33권5호
    • /
    • pp.596-604
    • /
    • 2019
  • 본 연구는 퇴적물이 소모하는 산소량(SOD)과 환경 인자가 서로 미치는 영향을 파악하기 위해 퇴적물 배양실험을 수행하였다. 이를 위해 실험실에서 용출 반응조를 설치하여 20일간 배양하였으며, 퇴적물에 존재하는 물질 중 P 및 Fe와의 관계를 중점적으로 연구하였다. 분석 결과, 수층의 용존 산소는 시간의 경과에 따라 감소하는 경향을 나타냈으며, 퇴적물의 산화환원전위 또한 음의 방향으로 진행되어 혐기적 환원환경이 조성되었다. 퇴적물 산소요구량(SOD)은 배양 초기 0.05mg/g로 측정되었으며, 20일차 0.09mg/g으로 퇴적물이 소모하는 산소량이 증가하는 경향을 관찰하였다. 이는 chl-a의 증가로 퇴적물 표층에 축적된 유기물의 분해에 의한 산소 소모(Biological-SOD), 그리고 환원반응에 의해 생성된 금속 환원물이 재산화 할 경우 소모되는 산소(Chemical-SOD)에 의한 것으로 보인다. 퇴적물에서 추출한 존재형태별 인과 SOD의 상관관계를 살펴보면 Ex-P, Org-P의 경우 양의 상관관계, Fe-P의 경우 음의 상관관계를 나타내었다. 또한, 실험 20일차 퇴적물의 미생물 군집을 분석한 결과 혐기성 철 환원균(FeRB)이 우점종으로 검출되었다. 따라서, 철 산화물과 결합한 인산염이 환원반응에 의해 분리될 경우 인산염은 수중으로 용출되어 일차생산력을 증가시키며, 환원물은 재산화 하여 퇴적물 산소 소모량에 기여하므로 본 연구는 산소 수지의 개선을 위한 기초 자료로 이용될 것으로 기대된다.

국내산 수산물 내 자연 및 인공방사능 축적 연구 현황 및 향후 연구 방향 (Accumulation of Natural and Artificial Radionuclides in Marine Products around the Korean Peninsula: Current Studies and Future Direction)

  • 이희수;김인태
    • 해양환경안전학회지
    • /
    • 제27권5호
    • /
    • pp.618-629
    • /
    • 2021
  • 2011년 동일본대지진에 의해 발생한 후쿠시마 원자력 발전소 사고와 최근 국내 지진 발생 빈도의 증가는 원자력 발전소의 지진 안전성에 대한 불안감을 야기하였다. 더불어 최근(2021년) 일본 동경전력은 후쿠시마 원전 오염수의 태평양 방류를 결정하였으며, 이로 인해 국내외 수산물을 통한 방사능 오염 가능성이 높아지면서 국민들의 우려가 급증하고 있다. 후쿠시마 원전사고 이후 해양으로의 인공방사능 유입에 관한 연구는 국제적으로 많이 이루어졌으나, 한국인의 주요 식재료인 동아시아 연근해의 수산물에서 인공방사능의 분포 현황 및 축적에 대한 연구는 상대적으로 부족한 실정이다. 따라서 이 논문에서는 후쿠시마 원전사고 이후, 국내산 수산물에서의 원전 기원 인공방사능(예, 137Cs, 239+240Pu, 90Sr 등)의 분포 특성과 관련한 최근 연구 사례들을 소개하고자 한다. 또한, 후쿠시마 원전오염수의 방류와 더불어 2030년까지 계획된 중국의 신규 원전 시설로 인한 향후 한반도 주변해역의 방사능 유출 영향에 대한 대비 및 사전 연구가 필요한 시점이기에 향후 연구 방향들을 제안하고자 한다.

메탄올 작업장 노출 평가에의 EU REACH 프로토콜 적용: Targeted Risk Assessment (The Application of an EU REACH Protocol to the Occupational Exposure Assessment of Methanol: Targeted Risk Assessment)

  • 나진성;송문환;최은경
    • 한국환경보건학회지
    • /
    • 제47권5호
    • /
    • pp.432-445
    • /
    • 2021
  • Background: The European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA) tool has been recognized by EU REACH as a preferred approach for calculating worker health risks from chemicals. Objectives: The applicability of the ECETOC TRA to occupational exposure estimation from industrial uses of methanol was studied by inputting surveyed and varied parameters for TRA estimation as well as through comparison with measured data. Methods: Information on uses of methanol was collected from seven working environment monitoring reports along with the measured exposure data. Input parameters for TRA estimation such as operating conditions (OCs), risk management measures (RMMs) and process categories (PROCs) were surveyed. To compare with measured exposures, parameters from the surveyed conditions of ventilation but no use of respiratory protection were applied. Results: PROCs 4, 5, 8a, 10, and 15 were assigned to ten uses of methanol. The uses include as a solvent for manufacturing sun cream, surfactants, dyestuffs, films and adhesives. Methanol was also used as a component in a release agent, hardening media and mold wash for cast products as well as a component of hard-coating solution and a viscosity-controlling agent for manufacturing glass lenses. PROC 8a and PROC 10 of a cast product manufacturer without LEV (local exhaust ventilation) and general ventilation as well as no respiratory protection resulted in the highest exposure to methanol. Assuming the identical worst OCs and RMMs for all uses, exposures from PROC 5, 8a, and 10 were the same and the highest followed by PROC 4 and 15. The estimation resulted in higher exposures in nine uses except one use where measured exposure approximated exposures without RMMs. Conclusions: The role of ECETOC TRA as a conservative exposure assessment tool was confirmed by comparison with measured data. Moreover, it can guide which RMMs should be applied for the safe use of methanol.

The Application of NIRS for Soil Analysis on Organic Matter Fractions, Ash and Mechanical Texture

  • Hsu, Hua;Tsai, Chii-Guary;Recinos-Diaz, Guillermo;Brown, John
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1263-1263
    • /
    • 2001
  • The amounts of organic matter present in soil and the rate of soil organic matter (SOM) turnover are influenced by agricultural management practice, such as rotation, tillage, forage plow down direct seeding and manure application. The amount of nutrients released from SOM is highly dependent upon the state of the organic matter. If it contains a large proportion of light fractions (low-density) more nutrients will be available to the glowing crops. However, if it contains mostly heavy fractions (high-density) that are difficult to breakdown, then lesser amounts of nutrients will be available. The state of the SOM and subsequent release of nutrients into the soil can be predicted by NIRS as long as a robust regression equation is developed. The NIRS method is known for its rapidity, convenience, simplicity, accuracy and ability to analyze many constituents at the same time. Our hypothesis is that the NIRS technique allows researchers to investigate fully and in more detail each field for the status of SOM, available moisture and other soil properties in Alberta soils for precision farming in the near future. One hundred thirty one (131) Alberta soils with various levels (low 2-6%, medium 6-10%, and high >10%) of organic matter content and most of dry land soils, including some irrigated soils from Southern Alberta, under various management practices were collected throughout Northern, Central and Southern Alberta. Two depths (0- 15 cm and 15-30 cm) of soils from Northern Alberta were also collected. These air-dried soil samples were ground through 2 mm sieve and scanned using Foss NIR System 6500 with transport module and natural product cell. With particle size above 150 microns only, the “Ludox” method (Meijboom, Hassink and van Noorwijk, Soil Biol. Biochem.27: 1109-1111, 1995) which uses stable silica, was used to fractionate SOM into light, medium and heavy fractions with densities of <1.13, 1.13-1.37 and >1.37 respectively, The SOM fraction with the particle size below 150 microns was discarded because practically, this fraction with very fine particles can't be further separated by wet sieving based on density. Total organic matter content, mechanical texture, ash after 375$^{\circ}C$, and dry matter (DM) were also determined by “standard” soil analysis methods. The NIRS regression equations were developed using Infra-Soft-International (ISI) software, version 3.11.

  • PDF