• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.510-511
• /
• 2012

최근 전력변환 분야에서 고압 인버터의 요구가 증가함에 따라 국내외 Drive 업체에서 멀티레벨 인버터에 대한 관심이 커지고 있다. 특히, 현재 LS산전에서 양산되고 있는 Cascaded H-Bridge(이하 CHB) Type의 멀티레벨 인버터와 더불어 1981년 Nabae 교수에 의해 처음 제안된 3-Level Neutral Point Clamped(이하 NPC) Type의 멀티레벨 인버터는 최근 그 성능 및 신뢰성에 대한 검증이 많이 이루어 졌으며 경쟁사인 ABB/YASKAWA/TMEIC사(社) 등에서 실제 제품화가 되고 있다. 본 논문에서는 현재 LS산전에서 개발중인 3-Level NPC 인버터 기반의 5-Level NPC 인버터의 System 최적화를 위해 양산중인 CHB Type의 멀티레벨 인버터와 그 특성을 비교하여 해당 인버터 개발에 대한 타당성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.512-513
• /
• 2012

The electric motor is essential to drive turbo machinery. In order to overcome the speed limitations of general motors, the inverter is used to perform high speed to tens of rpm. The high speed drives are widely used in many applications such as turbo blower, turbo centrifugal compressors, and pump using air bearing technique. Starting of high speed motor can cause step out, stall, oscillation of motor because the phase inductance is much smaller than that of ordinary motor. This paper studied on the starting characteristic of variable speed centrifugal chiller considering high speed motor characteristics. Finally, the superiority of the inverter is verified by experimental results.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.315-324
• /
• 2012

Waste reduce, recycle, energy recovery technology is one of 27 key green technology by 2012, the government should increase R&D investment, despite the period 2008 to 2010 average annual growth rate was decreased. Accordingly, this area of government investment in R&D status analyzed in detail and as a result, total government investment in R&D decreased, but in these fields to define strategic product services investment in technology is increasing centralization trend that appears to be investment in the quality of determined that the good is. In particular, in 2010, strategic product service of the technologies 3 technology groups ((1) waste energy equipment (2) waste resource recycling facilities (3) waste based materials production facilities) the proportion of 24-28% relatively evenly invested, government R&D is judged that adequate investment in quality.

• Asia Marketing Journal
• /
• v.15 no.3
• /
• pp.79-95
• /
• 2013

New product innovation is a process of embodying new knowledge in a product and technology licensing is getting popular as a means to innovations and introduction of new product to the market in today's competitive global market environment. Incumbents often rely on technology licensing to access new product opportunities created by other firms. Prior research has examined various aspects of technology licensing agreements such as specific contract terms of licensing agreements, e.g., distribution of control rights, exclusivity of licensing agreements, cross-licensing, and the scope of licensing agreements. This study aims to provide answers to an important, but under-researched question: why do some incumbents initiate more licensing agreement for exploratory learning while others do it for exploitative learning along the innovation process? We attempt to extend our knowledge of licensing agreements from an organizational learning perspective. Technology licensing as a specific form of interfirm linkages can be initiated with different learning objectives along the process of new product innovation. The exploratory stages of the innovation process such as discovery or research stages involve extensive searches to create new knowledge or capabilities, whereas the exploitative stages of the innovation process such as application or test stages near the commercialization are more focused on developing specific applications or improving their efficiency or reliability. Thus, different stages of the innovation process generate different types of learning and the resulting technological resources. We examine when incumbents as licensees initiate more licensing agreements for exploratory learning objectives and when more for exploitative learning objectives, focusing on two factors that may influence a firm's formation of exploratory and exploitative licensing agreements: 1) its past radical and incremental innovation experience and 2) its internal investments in R&D and marketing. We develop and test our hypotheses regarding the relationship between a firm's radical and incremental new product experience, R&D investment intensity and marketing investment intensity, and the likelihood of engaging in exploratory and exploitive licensing agreements. Using data collected from various secondary sources (Recap database, Compustat database, and FDA website), we analyzed technology licensing agreements initiated in the biotechnology and pharmaceutical industries from 1988 to 2011. The results of this study show that incumbents initiate exploratory rather than exploitative licensing agreements when they have more radical innovation experience and when they invest in R&D activities more intensively; in contrast, they initiate exploitative rather than exploratory licensing agreements when they have more incremental innovation experience and when they invest in marketing activities more intensively. The findings of this study contribute to the licensing and interfirm cooperation studies. First, this study lays a foundation to understand the organizational learning aspect of technology licensing agreements. Second, this study sheds lights on how a firm's internal investments in R&D and marketing are linked to its tendency to initiate licensing agreements along the innovation process. Finally, the findings of this study provide important insight to managers regarding which technologies to gain via licensing agreements. This study suggests that firms need to consider their internal investments in R&D and marketing as well as their past innovation experiences when they initiate licensing agreements along the process of new product innovation.

• Korean Journal of Mathematics
• /
• v.27 no.1
• /
• pp.221-267
• /
• 2019

In the five first sections of this paper we define and study the hypergeometric transmutation operators $V^W_k$ and $^tV^W_k$ called also the trigonometric Dunkl intertwining operator and its dual corresponding to the Heckman-Opdam's theory on ${\mathbb{R}}^d$. By using these operators we define the hypergeometric translation operator ${\mathcal{T}}^W_x$, $x{\in}{\mathbb{R}}^d$, and its dual $^t{\mathcal{T}}^W_x$, $x{\in}{\mathbb{R}}^d$, we express them in terms of the hypergeometric Fourier transform ${\mathcal{H}}^W$, we give their properties and we deduce simple proofs of the Plancherel formula and the Plancherel theorem for the transform ${\mathcal{H}}^W$. We study also the hypergeometric convolution product on W-invariant $L^p_{\mathcal{A}k}$-spaces, and we obtain some interesting results. In the sixth section we consider a some root system of type $BC_d$ (see [17]) of whom the corresponding hypergeometric translation operator is a positive integral operator. By using this positivity we improve the results of the previous sections and we prove others more general results.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.301-307
• /
• 2016

Additive manufacturing (AM), so called 3D Printing is a new manufacturing process and is getting attraction from many industries. There are several methods of 3D printing. Among them fused deposition modeling (FDM) type is most widely used by reason of cheap maintenance, easy operation and variety of polymeric materials. Articles manufactured by 3D printing have weak deposition strength compared with conventionally manufactured products. Deposition strength of FDM type 3D printed article is highly dependent of deposition temperature. Subsequently the nozzle temperature in the FDM type 3D printing is very important and it is controlled by heat source in the 3D printer. Nozzle is connected with heat block and barrel, and heat block contains heat source. Nozzle becomes hot through heat conduction from heat source. Nozzle temperature has been predicted for various thermal boundary conditions by computer simulation and compared with experimental measurement. Nozzle temperature highly depends upon thermal conductivities of heat block and nozzle. Simulation results are good agreement with experiment.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.617-632
• /
• 2014

Purpose: This study aims to explore the relationship between the focal firm's interdepartmental cooperation and new product development (NPD) performance with focus on the moderating effect of environmental uncertainty. The basic hypothesized model is that there are positively associated relationships. Methods: The proposed research model was tested using structural equation modeling with 601 responses from multi-functional and multiple respondents in Korean manufacturing firms. Multi-group SEM analyses were conducted to explore the degree to which the hypothesized model was equivalent for different levels of environmental uncertainty. Results: Interdepartmental cooperation between R&D and production is positively associated with NPD performance under both higher and lower environmental uncertainties, while one between R&D and marketing is positively associated under only higher environmental uncertainty. Conclusion: This paper determined that NPD performance is positively correlated with R&D-production cooperation in a focal firm, and the relationship between R&D-marketing cooperation and NPD performance is positively moderated by level of environmental uncertainty. Consequently, this study suggests that it is always important for firms to put much effort on R&D-production cooperation for a better NPD performance, while R&D-marketing cooperation should be enhanced especially under higher environmental uncertainty than lower.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.563-570
• /
• 2008

PDM(Product Data Management)은 제품의 개념정의에서부터 연구개발, 생산, 서비스에 이르는 전 과정에 걸쳐 관련된 모든 제품 정보를 협업을 통해 생성, 관리, 사용하도록 지원하는 일련의 프로세스를 의미한다. PDM 시스템 구축의 일차적 목적은 제품 관련 데이터의 정합성을 확보하여 데이터 관리의 효율성을 제고하고, 업무프로세스의 개선 및 표준화로 부가가치 창출에 기여하는 것이다. 특히 제품의 연구 개발 프로세스 전반에 걸친 제품정보의 공유를 통해 연구개발 부서와 기타 업무부서간 협업적 업무 프로세스의 구축을 촉진함으로써 R&D 경쟁력 확보에 기여할 수 있다. 본 연구에서는 의료기기 제조업체의 PDM 구축사례를 소개함으로써 R&D 경쟁력 확보를 위한 PDM의 효용성에 대해 논의하고자 한다. 본 연구의 사례에서는 PDM 시스템 구축을 통해 BOM 관리, 도면 및 설계변경 관리, 문서 관리 등에 소요되는 시간의 $30\sim70%$ 가량을 단축하였으며, 연간 $3\sim5%$ 가량의 재료비 절감이라는 효과를 거두었다. 본 사례연구의 결과가 PDM 도입 시 실질적인 지침을 수립하는데 도움이 될 뿐만 아니라 효과적인 PDM 구축절차 수립에 기여할 것으로 기대한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.70-80
• /
• 2020

This study examined the effects of the R&D project managers' leadership on the product development performance. A survey was carried out empirically on a group of 175 experts associated with project management R&D operations in the field of manufacturing, construction engineering, shipbuilding, plant, and IT. The survey results showed that the effects of the R&D project managers' leadership on the product development performance were not significant, and the mediating effects of the project sponsor roles were significant. This means that the leadership of leaders, which requires efficient control and management based on complicated intergroup relationships and roles, is important in a project involving experts from the professional field. This suggests that the efficient leadership of leaders can improve the performance through the cooperation of members in the organization and aggregation of their core competencies in a limited time. Overall, the key results of this study mean that project leaders should play an active mediating role to maximize their leadership and enhance the role of project sponsors. In addition, the mediating role of project sponsors has an effect on the leadership of project managers, affecting the project performance quality.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.329-341
• /
• 2017

In order to analyze how the entrepreneurship affects the commercialization performance in relation to R&D input factors, technological innovation and technology in the course of technology commercialization process. Korean manufacturing venture companies has been surveyed. The structural equation model showed technology commercialization mechanism driven by entrepreneurship. Innovativeness is one of the most important factors in the success of venture firms. Technology commercialization was dependent on innovation rather than the input of research and development resources. Technological innovation shows mediating effects in the influence of entrepreneurship on commercialization performance, but technology capability has relatively small effect. Commercialization process of new product development and product improvement was different. The government needs to actively support R&D strategies and commercialization infrastructure in order to promote innovation, assist R&D workforce and enhance product commercialization in venture companies.