• 품질경영학회지
• /
• 제27권1호
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• 한국의류학회지
• /
• 제25권4호
• /
• pp.754-763
• /
• 2001

The purpose of this study was to examine: 1) the differences in the automation level by company characteristics(i.e., product category, product type, firm size); 2) the effects of company context(i.e., environmental uncertainty, task uncertainty) on the automation level; and 3) the effect of the automation level on manufacturing performance(i.e., quality, flexibility, time, cost). Data were collected from a mail survey. Four hundred eighty two questionaries were mailed to apparel manufacturers nationwide, and 60 responses were analyzed. The results revealed that: 1) mens and womens wear manufacturers and large manufacturers(i.e., the number of employees, sales volume) showed higher automation level; 2) environmental complexity positively affected the automation level; and 3) the automation level had a positive effect only on quality performance.

• Journal of Microbiology and Biotechnology
• /
• 제28권4호
• /
• pp.561-565
• /
• 2018

The late-stage doxorubicin biosynthesis pathway acting enzyme (DoxA) from Streptomyces peucetius CYP129A2 exhibited substrate promiscuity towards the stilbene group of compounds such as resveratrol. DoxA along with two accessory enzymes ferrdoxin reductase and ferredoxin from spinach hydroxylated resveratrol at the 3'-position in vitro to produce piceatannol. The product was identified by HPLC-PDA and high-resolution HR-qTOF-ESI/MS analyses in positive mode. The ESI/MS fragments resembled the hydroxylated product of resveratrol.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.797-806
• /
• 1995

An ergonomic evaluation model which can properly evaluate the design of a product or workplaces was developed to evaluate a new product in the early stage of design. Although several evaluation models have been developed and are in use in the field of ergonomics, they lack an integrated framework and analysis techniques. In this research, an ergonomic evaluation model was developed according to the framework which accommodates desirable components of the model. The framework represents the integration of four components: man model, workplace modeller, ergonomic evaluation functions and knowledge bases, which interact with a common object-oriented database. Components were developed individually and integrated with the workplace modeller. The generation and manipulation of man models, workplace modelling, and ergonomic evaluation features such as reach and visibility were implemented. The developed evaluation model has demonstrated distinct advantages of the flexibility to adapt another features for the ergonomic evaluation model and the better usability for users.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.180-189
• /
• 1999

Solid freeform fabrication technology, widely known as rapid prototyping an rapid tooling, can create physical part directly from digital model by accumulating layers of a given material. Providing a tremendous flexibility of a part geometry that they can fabricate, these technologies present a opportunity or the creation of new products that can not be made with existing technologies. For this to be possible, however, various design environments including different fabrication processes needs to be considered at the time of design, and finding an appropriate design solution for the new product by combining necessary design communications become increasingly complex as environmental condition become diverse. This paper proposes a geometric modeling paradigm for design and fabrication of a new product, honeycomb structural geometry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1491-1494
• /
• 2008

Typically internal mobile LCD display modules are connected to the mobile product baseband PCB with flexible printed circuit board equipped with board-to-board connector. This solution has a drawback of limiting the product concept work to certain solutions that are based on connector size, location, flexible PCB length, bending, etc. in the display module. Also flexible printed circuit board based solutions are not completely optimized from reliability point of view, causing flex circuit board breakings. For the external displays in the PC or Home entertainment market, the cable solution is too expensive and resource demanding. The wireless solution has obvious advantages over reliability, low cost and flexibility. This paper describes a wireless audio-visual interface solution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 2003

Knowledge classification and expression of constructed knowledge have been main research issues in the field of knowledge representation. Constructed design knowledge of the former product loses its utility when new products with different structures are introduced to the market. In order to construct the design knowledge for a new product. designers need to reconstruct the design knowledge with new relationships. The design knowledge has been constructed with level trees, but it is difficult to rearrange the relations. Design DNA is proposed in this work in order to facilitate the rearrangement of design knowledge and give flexibility to knowledge structure. Design DNA is based on Layout-oriented domain knowledge and Function-oriented domain knowledge, which enables to generate new design knowledge that will result in new part geometries for given constraints on the part functions. Design DNA is applied to the design knowledge of lever system of the automatic transmission of passenger cars as an example.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.91-97
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• 품질경영학회지
• /
• 제4권1호
• /
• pp.13-19
• /
• 1976

In the quality planning phase, the techniques for measuring cost-quality trade-offs are used for the selection of the optimal design specifications when design flexibility permits significant trade-offs to be made. But the product quality is not only depends on the developing cost, but also the time for developing that product. Therefor it is important to seek a methodology for estimating time-cost-quality trade-offs associated with the quality planning projects. This paper is aimed to find a methodology of time-cost-quality trade-offs and to develop a proper algorithm.

• 전자공학회논문지A
• /
• 제30A권12호
• /
• pp.108-116
• /
• 1993

When realizing a multiple-output function by a PLA, there is often the flexibility to choose either uncomplementary or complementary phase for each output. In this case, it is possible to significantly reduce the number of product terms by fully exploiting the freedom. This paper presents a PLA phase for each output of a multiple-output function so that the product terms for each output are maximally shared with the other outputs. and then minimizes the multiple-output function with the assigned output phase assignment. The algorithm has been implemented on Sun4/330 in C language and compared with the previous approaches for 56 example PLA`s. The proposed algorithm has obtained better results for 18-32 PLA's, worse results for 1-5 PLA`s, and the same results for 23-33 PLA's. Moreover, the computation time is much less than for the previous approaches.