• 대한수학회보
• /
• 제45권2호
• /
• pp.339-353
• /
• 2008

The distributions of products and ratios of random variables are of interest in many areas of the sciences. In this paper, the exact distributions of the product |XY| and the ratio |X/Y| are derived when X and Y are independent Pearson type VII random variables.

• Journal of the Korean Data and Information Science Society
• /
• 제15권4호
• /
• pp.1011-1017
• /
• 2004

The distribution of the product |XY| is derived when X and Y are Laplace and Bessel random variables distributed independently of each other.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.217-220
• /
• 2007

The quality of product depends on a lots of injection molding conditions at each operation stage and mainly was effected by pressure and temperature. The objective of this study was to investigate the relationship between the product quality and the distribution of pressure in a cavity with operation condition change. Specimen having some ribs was designed and the mold was prepared and temperature and pressure sensors were installed in the mold. PP was used and pressure distribution was measured with operation condition change. The relationship between the sink mark and the pressure in a cavity was investigated by measurement of the level of sink mark. The level of sink mark was decreased at the cross of plane and rib by increasing of pressure in a cavity, so the pressure should be controlled properly in order to get the required quality.

• 응용통계연구
• /
• 제22권1호
• /
• pp.171-179
• /
• 2009

본 논문에서는 정규확률변수의 곱과 그의 합으로 표현되는 통계량의 분포에 대한 효과적인 근사법을 다루었다. 이차 형식에 대한 안장점근사에 기초한 이 방법은 기존의 정규근사에 비해 매우 정확한 결과를 제공한다. 또한 이에 대한 응용으로 FSK 통신에서 발생하는 문제를 제시하고, 그 해결책으로 본 논문에서 제안한 안장점근사법을 사용하였다. 모의실험을 통해 제안된 근사법이 중심영역은 물론, 통신이론에서 주요 관심 영역인, 극단 꼬리부분의 확률 근사에도 매우 유용한 방법임을 확인하였다.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.199-206
• /
• 1997

The inner pulley is an automobile component used as air conditioner clutch assembly. In cold forging of inner pulley, the design requirements are to keep the same height of the inner rib and outer one, and to make uniform the hardness distribution in the forged product. In industry, the design of forging processes is performed based on experience-oriented technology, that is, designers experience and expensive trial and error. Using the rigid-plastic finite element simulations. we design the optimal process conditions, which has a preforming operation. Also the final product configuration of forging has to be designed again in view of metal flow involved in the operation, derived from the finite element simulations. The forged pulley is investigated by checking the hardness distribution and it is noted that distribution has improved to be even and high enough for industrial application.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.111-118
• /
• 1995

A method of determining an optimum blank shape for the non circular deep drawing process is more investigated and applied to the balnk design for multi-stage deep drawn product. The forming procedure of two-stage deep drawing process is looked over and the method of determining a blank shape is proposed. In experimental research, a optimum blank and a optional rectangular blank were considered and we measured thickness strain distributions. We could predict a strain distribution and compare with a experimental strain distribution. Also, the strain distributions for the blank shapes, optimum and rectangular, were compared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.866-872
• /
• 2000

Superplastic forming processes by characteristic of low flow stress and high elongation have advantages to reducing on production cost and weight because of the product of complex form could be made in one part. However superplastically termed part has a characteristic of non-uniform thickness distribution along forming direction. Especially. since the thickness distribution affects on mechanical properties of product. the uniform thickness is very important. There are two solution procedure of implicit and explicit procedure to analyze the superplastic forming. In this study to analyze the thickness distribution two kinds of commercial programs of DEFORM and PAM-STAMP which implicit and explicit code are used respectly. The results from the two Programs were compared with eath other As a result implicit code were more suitable than explicit code for superplastic forming analysis.

• 소성∙가공
• /
• 제6권4호
• /
• pp.329-337
• /
• 1997

Forging of an inner pulley for compressor clutch assembly of car air conditioner is investigated in this study. In cold forging of inner pulley, the design requirements are to keep the same height of the inner rib and the outer one, and to make uniform the hardness distribution in the forged product. Using the rigid-plastic finite element simulation. we design the optimal process conditions, which has a performing operation. Also the final product configuration of forging has to be designed again in view of the metal flow involved in the operation, derived from the finite element simulations. The forged pulley is investigated by checking the hardness distribution and it is noted that the distribution has improved to be even and high enough for industrial application.

• Journal of the Korean Data and Information Science Society
• /
• 제21권2호
• /
• pp.345-354
• /
• 2010

The Gamma Distribution is widely used in Engineering and Industrial applications. Estimation of parameters is revisited in the two-parameter Gamma distribution. The parameters are estimated by minimizing the likelihood ratios. A comparative study between the method of moments, the maximum likelihood method, the method of product spacings, and minimization of three different likelihood ratios is performed using simulation. For the scale parameter, the maximum likelihood estimate performs better and for the shape parameter, the product spacings estimate performs better. Among the three likelihood ratio statistics considered, the Anderson-Darling statistic has inferior performance compared to the Cramer-von-Misses statistic and the Kolmogorov-Smirnov statistic.

• International Journal of Reliability and Applications
• /
• 제7권2호
• /
• pp.187-201
• /
• 2006

In this paper, we derive recurrence relations for the single and product moments of progressively Type-II right censored order statistics from half logistic distribution. Next, we derive the maximum likelihood estimators (MLEs) of the location and scale parameters of the half logistic distribution. In addition, we use the setup proposed by Balakrishnan and Aggarwala (2000) to compute the approximate best linear unbiased estimates (ABLUEs) of the location and scale parameters. Finally, we point out a simulation study to compare between the efficiency of the techniques considered for the estimation.