• Journal of the Korean Society of Marine Environment & Safety
• /
• 제26권3호
• /
• pp.277-285
• /
• 2020

Recently, studies have been actively conducted on seismic design and improvement of the seismic performance of bridges, buildings, factories, and plants. In particular, heavy items that are being manufactured or waiting to be shipped from factories (such as generators, engines, and boilers) must be equipped with seismic stoppers to prevent them from moving or falling during an earthquake. Seismic stoppers should be suitably determined by the size and weight of these heavy items; however, they have no general design standard. In this study, structural analyses and seismic tests were conducted to evaluate the performance of newly designed seismic stoppers. Structural analysis was performed on three stopper models to estimate the external load at which the yield stress of the material was not exceeded. Based on the analysis results, a seismic test of the stopper was carried out in accordance with the AC156 test method. Finally, product specifications for all three seismic stopper models were determined and their static/dynamic load performance was evaluated.

• Journal of the Korean Society of Combustion
• /
• 제20권2호
• /
• pp.1-13
• /
• 2015

Drying, which is the oldest and most energy-intensive process, is an essential process for treatment of solid product. The specific procedure to design and evaluate the dryers, which are a rotary kiln dryer and a flash dryer, in case of drying the high-moisture coal was described. From determination of size to the heat and mass balance in one-dimensional model were conducted to evaluate the performance of dryers. Heat consumption, inlet gas temperature and size of the dryers were compared between a rotary kiln dryer and a flash dryer. Further considerations to evaluate the reactor elaborately were also discussed. Performance simulation of dryers along with the design procedure described here will provide helpful basis for understanding the concept of reactor design.

• The Journal of Economics, Marketing and Management
• /
• 제6권4호
• /
• pp.51-64
• /
• 2018

Purpose - This study is intended to look into the influences of restaurant consumers' e-WOM information communication on product perception risk, benefit and WOM effect. Research design, data, and Methodology - To achieve this, a survey was empirically carried out to 426 restaurant consumers. Results - The findings are as follows. First, the influence of e-WOM on product perception risk showed that WOM information sender characteristics, WOM information recipient characteristics and online community had a statistically significant positive influence on product perception risk. Second, the influence of e-WOM on product risk benefit showed that WOM information sender characteristics, WOM information recipient characteristics and online communication had a statistically significant positive influence on product risk benefit. Third, WOM risk perception had a statistically significant positive influence on WOM acceptance. Fourth, WOM risk benefit had a statistically significant positive influence on WOM effect. Conclusions - As for the above-mentioned findings, the communication between e-WOM sender and recipient had a positive influence on the product evaluation and attitude change in the restaurant industry, and the WOM effect had an influence on the financial performance and non-financial performance. The communication attaches importance to a direct using and tasting experience due to the nature of restaurant industry when it is simultaneously performed as a positive mechanism between sender and recipient through each channel of these factors. But the e-WOM culture can lead to the WOM effect when both sender and recipient share the persuasive communicability in reality that diversifies communication methods, having a positive influence on the management performance.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 한국마이크로전자및패키징학회 2003년도 International Symposium
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• Journal of Distribution Science
• /
• 제22권7호
• /
• pp.73-82
• /
• 2024

Purpose: This study aims to identify the assessment criteria on textile and apparel supply chain management performance. Research design, data, and methodology: An integrated method of Delphi, quantitative survey, and ANP, in which Delphi with Kamet principle was applied to define the set of criteria, quantitative survey with reliability and validity test was utilized to ensure the match between the set of criteria and the whole textile and apparel industry, and ANP was used to derive weights of these criteria. Results: The set of supply chain management performance evaluation criteria composes of seven criteria namely order fulfillment quality, agility, costs, asset management, information sharing, innovation, and product development and 19 sub-criteria. Conclusions: This study theoretical contribution is the proposition of the set of evaluation criteria on supply chain performance. Regarding practical contribution, the study findings are guidelines for T&A companies in assessing and improving their supply chain capability. However, the findings are only for Vietnamese T&A context. Future research, therefore, may be expanded to other regions or countries' T&A industry. Additionally, future step to this study may be the utilization of other techniques of MCDM or methodological approaches like multiple regression, PLSSEM in defining weights of criteria or performance evaluation.

• IE interfaces
• /
• 제24권4호
• /
• pp.420-427
• /
• 2011

The present study developed an anthropometric design method accommodating physical human variabilities for user-centered product development. The proposed design method is based on the boundary zone method, a technique to generate a group of humanoids properly representing the body size diversity of thedesign target population. In addition, the anthropometric design method considers the variability of postures in the design process by incorporating the simulation of posture. The effectiveness of the proposed design method was evaluated in terms of multivariate accommodation percentage (MAP) by applying it to designing a computer workstation with 90% of accommodation percentage. The performance evaluation showed that the MAP (89%) of the computer workstation design produced by the proposed method was quite close to the designated accommodation percentage. The proposed design method can be of use to develop an effective anthropometric design for user-centered product development.

• The Journal of Information Systems
• /
• 제32권3호
• /
• pp.133-150
• /
• 2023

Purpose This study aims to develop classification models using a decision tree algorithm to identify core keywords and rules influencing online consumer review evaluations for the robot vacuum cleaner on Amazon.com. The difference from previous studies is that we analyze core keywords that affect the evaluation results by dividing the subjects that evaluate online consumer reviews into self-evaluation (star ratings) and peer evaluation (helpfulness votes). We investigate whether the core keywords influencing star ratings and helpfulness votes vary across different products and whether there is a similarity in the core keywords related to star ratings or helpfulness votes across all products. Design/methodology/approach We used random under-sampling to balance the dataset. We progressively removed independent variables based on decreasing importance through backwards elimination to evaluate the classification model's performance. As a result, we identified classification models that best predict star ratings and helpfulness votes for each product's online consumer reviews. Findings We have identified that the core keywords influencing self-evaluation and peer evaluation vary across different products, and even for the same model or features, the core keywords are not consistent. Therefore, companies' producers and marketing managers need to analyze the core keywords of each product to highlight the advantages and prepare customized strategies that compensate for the shortcomings.

• Journal of Applied Reliability
• /
• 제12권3호
• /
• pp.165-176
• /
• 2012

Hydrostatic bearing improves performance and life time of a product by avoiding solid friction and reducing viscosity friction with the help of creating pressure equilibrium between two faces doing relative motion. This study suggests failure analysis and test evaluation for a ball joint that adopts the hydrostatic bearing and introduces the entire process to improve reliability of the product by design improvement. A typical failure is growth of friction torque by solid friction, and its failure cause is determined and the improvement is proposed. Finally, reliability improvement is established by analysis of the results of before and after acceleration test.

• Archives of design research
• /
• 제17권3호
• /
• pp.111-122
• /
• 2004

The purpose of this study are two the first is to identify the positioning of product design and analyze its functional relationship with product development, manufacturing, marketing and sales in the comprehensive competitiveness evaluation model ; and the second is to estimate the determinants of QCI(quality competitiveness index), analyze the impact of product design on QCI, and compare the aforementioned results for the seven industrial sectors and the five product patterns. For this empirical analysis, this study surveyed 400 Korean manufacturing firms during August-October 2003. The major empirical findings are summarized as follows : First, the hypothesis on the positive effect of product design on QCI is accepted at a highly significant level (p < 0.001) for all : the manufacturing sector, seven industrial sectors, and five product categories. Second, the correlation analysis and factor analysis lead to the result that the effect of product design on QCI is estimated to be relatively very low, in comparison to those of product functionality and basic performance on QCI. These findings imply that Korean manufacturing sector has been still in the prematured stage at which product design has not played an important role yet. This study concludes that product design in line with other functions (product development, manufacturing, marketing, and sales) should make a good contribution to the improvement of QCI in the future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제12권5호
• /
• pp.135-140
• /
• 2013

Ultrasonic cutting is a kind of eco-technique and cost-effective technique to be used for cutting of various materials such as baked product, fresh/frozen food, rubber, textile, wood, bone, etc. The performance of ultrasonic cutting is affected by design of cutting horn and cutting conditions. Specially the design of horn to resonate at the longitudinal direction is most important. To analyze the problems from which cracking and noise are often generated with conventional cutting horn, FEA is carried out, and then improved cutting horn which can reduce maximum stress and stress concentration is designed. Vibration characteristics, resonant frequency, gain, and amplitude uniformity of the cutting horn designed optimally are evaluated through FFT analysis and compared with those of conventional cutting horn.