• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.1
• /
• pp.21-28
• /
• 2008

Diagnostic display monitor QA according to AAPM TG18 is usually performed by PACS administrator, product manager and reading doctor, and for acceptance testing and periodic quality control evaluation, a combination of visual and quantitative tests can be used, as outlined in sections 5 and 6 of 'assessment of display performance for medical imaging systems'. Although many display tests can be performed visually, a more objective and quantitative evaluation of display performance requires special test tools. The required instruments vary in their complexity and cost, depending on the context of the evaluation(research, acceptance testing, or quality control) and how thorough the evaluation needs to be. Objective and reliable assessment of many display characteristics can be performed with relatively inexpensive equipment, So, we made 'AAPM TG18 guiding instrument' to ues variable purpose of the evaluation of 'geometrical distortions(quantitative"', 'veiling glare(visual)' and 'sensor calibration'. The spatial measurements for the quantitative evaluation of geometric distortions, and the measurement of the veling-glare ring response function which provides information regarding the spatial extent of the luminance spread, can be performed using the TG18 guiding instrument can be used to sensor calibration to standardize the basic rate of 0% luminance when periodic calibration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.630-634
• /
• 2017

The importance of SW quality is also rising as the usage of SW is increased in the areas of society. The development of SW quality competency of the human resource is essential for ensuring the quality of SW product, and the details of it should be reflected firstly in the demands of industrial sites. In this paper, the needs assessment and the training priorities were identified by IT Test and IT Quality Assurance based on National Competency Standards(NCS). T-test, Borich's need assessment model, and the Locus for Focus Model were conducted for determining training priorities. As a result, top and post training priorities were drawn from the redundancy check and some related implications were suggested.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.55-61
• /
• 2013

In this study, eco efficiency analysis is performed to analyze Neodymium (Nd) containing permanent magnet recycling process. Life cycle assessment (LCA) and life cycle costing (LCC) are used to apply eco efficiency analysis. In the environmental aspects, global warming potential (GWP) of 1kg permanent magnet is 1.25E + 00 kg $CO_2$ eq. and abiotic resource depletion potential (ADP) is 1.10E - 02 Sb eq. This recycling process costs about 2130 KWR. Environmental efficiency of GWP is at 6.43 and ADP is at 5.32 when compared with vigin metal. Economic efficiency is at 6.74. This study confirms that Nd containing permanent magnet recycling process is sustainable system because of environmental and economical improvement.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.596-599
• /
• 2007

A comparative Life Cycle Assessment (LCA) among three types of Electric Motor Unit (EMU) Interior Panel (IP) was conducted. A functional unit for comparative LCA is a weight of IP for 1 EMU. It is assumed that Manufacturing stage and its upstream processes, Use stage and End of Life (EoL) stage are included in the boundary of product system. For Use stage, the weight of IP causes electricity consumption. It is assumed that aluminum IP is recycled and the other IPs are incinerated at the EoL stage. As a comparison results, aluminum IP has much larger environmental impact (5.162pt) than others (FRP IP; 4.069pt, Phenol IP; 4.053pt) even though recycling consideration is included. The manufacturing stage of aluminum IP has relative big environmental impact (1.824pt) and this point make the most important difference from other IPs (FRP IP; 0.1617pt, Phenol IP; 0.4534pt)). Despite of large weight difference between FRP IP (888.96kg) and phenol IP (316kg), the final environmental impact result has only little difference (0.016pt, 0.39%). With this result, the EMU designer can choose IP with a consideration of the environmental performance of IP.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.545-552
• /
• 2018

The purpose of this study was evaluated the relationship between echocardiography and cardiac computed tomography in normal adults by visual assessment, and evaluated the effective doses of cardiac computed tomography. The subjects were 100 normal patients who visited two general hospitals in Chungnam, from January 1 to May 30, 2018. We obtained images by using these modalities and evaluated the wall thickness and internal dimension of the Left Ventricle with visual assessment. To evaluate the appropriateness of the visual evaluation, two evaluators who were trained for one week were measured and the agreement between the evaluators were verified by statistical analysis. The effective doses of computed tomography were evaluated using the dose length product. As a result, there was a high correlation between the two modalities. The agreement between the two visual evaluator were also highly agreed. The mean X-ray dose of the subjects was $11.1{\pm}3.1mSv$. Although the purpose of imaging is somewhat different in the clinical setting, echocardiography could achieve the same results as radiation-invasive computed tomography. It is thought that utilization will become even larger.

• Food Science of Animal Resources
• /
• v.39 no.4
• /
• pp.565-575
• /
• 2019

This study evaluated Campylobacter jejuni risk in ground meat products. The C. jejuni prevalence in ground meat products was investigated. To develop the predictive model, survival data of C. jejuni were collected at $4^{\circ}C-30^{\circ}C$ during storage, and the data were fitted using the Weibull model. In addition, the storage temperature and time of ground meat products were investigated during distribution. The consumption amount and frequency of ground meat products were investigated by interviewing 1,500 adults. The prevalence, temperature, time, and consumption data were analyzed by @RISK to generate probabilistic distributions. In 224 samples of ground meat products, there were no C. jejuni-contaminated samples. A scenario with a series of probabilistic distributions, a predictive model and a dose-response model was prepared to calculate the probability of illness, and it showed that the probability of foodborne illness caused by C. jejuni per person per day from ground meat products was $5.68{\times}10^{-10}$, which can be considered low risk.

• Natural Product Sciences
• /
• v.25 no.3
• /
• pp.238-243
• /
• 2019

In this study, the marker compounds of Curcumae Rhizoma (CR) were simultaneously quantified by high-performance liquid chromatography equipped with a photodiode array detector and the anti-inflammatory effects of CR extract and marker compounds in human benign prostatic hyperplasia epithelial-1 (BPH-1) cell lines were investigated. The marker components (4S,5S)-(+)-germacrone-4,5-epoxide, furanodienone, and germacrone, were separated on Gemini $C_{18}$ columns ($250mm{\times}4.6mm$, $5{\mu}m$) at $40^{\circ}C$ by using a gradient of two mobile phases eluting at 1.0 mL/min. Prostaglandin $E_2$ ($PGE_2$) levels in Human BPH-1 cells were determined with an ELISA kit. The coefficients of determination in a calibration curve of each analyte were all 0.9997. The limits of detection and quantification of the three compounds were $0.10-0.32{\mu}g/mL$ and $0.30-0.98{\mu}g/mL$, respectively. The content of three compounds, (4S,5S)-(+)-germacrone-4,5-epoxide, furanodienone, and germacrone, in the CR sample were found to be 5.79 - 5.92 mg/g, 4.72 - 4.86 mg/g, and 1.06 - 1.09 mg/g, respectively. Regarding pharmacological activity against benign prostatic hyperplasia, CR and its components significantly suppressed $PGE_2$ levels of BPH-1 cells. The established analysis method will help to improve quality assessment of CR samples and related products. In addition, CR and its components exhibit antiinflammatory activity in BPH-1 cells, suggesting the inhibitory efficacy of these compounds against the pathogenesis of BPH.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.116-128
• /
• 2022

Purpose: The paper aims to: 1) identify the reasons for the low usage of recycled paper in domestic workplaces and the premature state of recycled paper industry; 2) assess the environmental effects of replacing domestically consumed copy papers with recycled papers; and 3) suggest ways in which the recycled paper industry can expand in South Korea. Method: Questionnaire survey with cluster sampling is used to identify the attitudes and behavior with respect to recycled copy paper, the results of which are analyzed using SPSS. The environmental effect of replacing copy papers with recycled paper is assessed through the Life Cycle Assessment approach and Paper Calculator V4.0. Result: While the respondent's experience in using recycled copy paper was relatively low, they tend to acknowledge the need for its use and show relatively high satisfaction with the quality of the recycled paper. The environmental benefits of replacing ordinary copy paper with 40%+ recycled paper under the 10% market share increase scenario amounts to 60,000 tons of CO₂ emissions reductions. Conclusion: The results from the attitude survey and market research, five approaches to improving the recycled copy paper market are suggested.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.10
• /
• pp.1219-1225
• /
• 2022

Microorganisms involved in food fermentation not only improve the aroma and taste of the food, but also enhance its preservation. Thus, they are added as starter cultures to boost the final product quality of commercial fermented foods. Although these microorganisms originate from fermented foods and have a long history of consumption, the European Union recently applied the concept of Qualified presumption of Safety (QPS), which is a safety evaluation system for microorganisms used in food or feed in Europe. The QPS system is a species-level safety system and shares results with the European Novel Food System, a strain-level safety evaluation system. In the United States, microorganisms added to fermented foods are considered as food additives or Generally Recognized as Safe substance. In Korea, food microbe lists are presented at the species level. Moreover, the nation has established a strain-oriented evaluation system that applies temporary safety evaluation methods for food raw materials as well as new raw materials. However, when it comes to microorganisms isolated from traditional fermented foods and other fermented food products, there is no definition of the term "species," and there is a lack of an evaluation system at the species level. Therefore, such an evaluation system for microbial species used in Korean fermented foods is necessary.

• Journal of Software Assessment and Valuation
• /
• v.17 no.1
• /
• pp.11-16
• /
• 2021

The importance of software is increasing due to the development of information and communication, and software copyright disputes are also increasing. In this paper, the source of the submitted programs and the files necessary for the execution of the program were taken as the scope of analysis. The large-capacity file transfer solution program to be analyzed provides additional functions such as confidentiality, integrity, user authentication, and non-repudiation functions through digital signature and encryption of data.In this paper, we analyze the program A, program B, and the program C. In order to calculate the program similarity rate, the following contents are analyzed. Analyze the similarity of the package structure, package name, source file name in each package, variable name in source file, function name, function implementation source code, and product environment variable information. It also calculates the overall similarity rate of the program. In order to check the degree of agreement between the package structure and the package name, the similarity was determined by comparing the folder structure. It also analyzes the extent to which the package structure and package name match and the extent to which the source file (class) name within each package matches.