• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1022-1027
• /
• 2005

This research presents a collaborative supply chain management system for curtain walls using Radio Frequency IDentification (RFID) to track the product and information flow among participants in high-rise building construction projects. This resarch developed a process model and a strategy for effective utilization of RFID technology through the curtain wall life-cycle. Then an information management system was developed to support the supply chain management of curtain walls with incorporating RFID into curtain wall products flow throughout the life-cycle. The system has been tested for validation and verification in a real world project.

• Korean Business Review
• /
• v.18 no.1
• /
• pp.59-79
• /
• 2005

recently, world is progressing large quantity consumption with continuous Innovation and economic growth and pollution is accelerated at these process. Increase of industry activity and service that is point of corporation activity is discharging environmental pollutants at whole process to manufacture of end product and exhaust process from acquisition of raw material for accompanied product production hereupon. At the same time, being promoting resources consumption by that use much raw material, As a result, is becoming obstacle factors in sustainable development. So, corporation's responsibility for environmental protection is emphasized. Corporation which must prepare in green round or environmental problems should consider environmental effects that is happened over whole life of products that include waste treatment after raw material acquisition and use as well as selling end product simply. A Life Cycle Assessment techniques is normalized and standardized in International Standard Organization for technical committee 207(TC 207) world widely, and effort to apply in corporation's activity because mastering LCA techniques in domestic several corporations is undergone actively. Coming into effect of Kyoto's Protocol and International Organization for Standard 14000 series revision are presenting new survival principle in competition between country or corporation. LCA technique may become very useful means to corporation which wish to attempt environment management in real condition that awareness for environment is important. Also, An LCA to each product is going to cause big effects in corporation's whole image as well as competitive power raising for single product. Therefore, this research wishes to examine some instances for the future competitive product development at the estimation of environmental friendliness using LCA techniques and more theoretical considerations of the LCA techniques that can dominate corporation's fate.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.39-43
• /
• 2004

A research shows that a new category of software, Collaborative Product Commerce (CPC), is now emerging, allowing discrete manufacturers to once again distinguish themselves on their products and innovations. CPC permits discrete manufacturers to significantly improve the core processes around the management functions associated with the complete product life cycle that are the basis of their existence. As a way to develop computing tools of CPC to support a design process of product, a web-based design supporting system was constructed in the paper. The system consists of C-Product system and Net Meeting Communication system to improve communications between designers and persons for verification of design. The product data files of C-Product system were designed by Pro/Engineer and converted to 3D Viewer format for being used in the web browser. Also, Net Meeting Communication system and Database were developed using ASP and Microsoft SQL 2000 Server to share diverse files that can be utilized to design on the web in real time.

• Journal of Intelligence and Information Systems
• /
• v.15 no.4
• /
• pp.37-51
• /
• 2009

One of the critical issues in the management of manufacturing companies is the efficient process of planning and operating service resources such as human, parts, and facilities, and it begins with the accurate service demand forecasting. In this research, service and sales data from the LCD monitor manufacturer is considered for an empirical study on Product Life Cycle (PLC) based service demand forecasting. The proposed PLC forecasting approach consists of four steps : understanding the basic statistics of data, clustering models using a self-organizing map, developing respective forecasting models for each segment, comparing the accuracy performance. Empirical experiments show that the PLC approach outperformed the traditional approaches in terms of root mean square error and mean absolute percentage error.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.2
• /
• pp.223-232
• /
• 2014

Life-cycle assessment (LCA) is often employed to quantify the environmental impact of a product in a comprehensive manner. The aspects of performance and usability as well as that of eco-friendliness should be considered in an integrated manner for the market competitiveness of an eco-friendly product. The present study developed a product improvement plan for an eco-friendly electric heater by benchmarking two small-size electric heaters (companies 'H' and 'T') in terms of performance, usability, and eco-friendliness. The performance measurements such as temperature, humidity, wind speed, noise, and power consumption were collected while the two heaters were operated in a laboratory setting. Then, the usability evaluations such as aesthetics, operation satisfaction, performance satisfaction, and overall satisfaction were surveyed for the two heaters using a 5-point scale (1 for very unsatisfied and 5 for very satisfied). Lastly, the LCA analysis was conducted by following the six-step process of eco-friendly product design provided by KEITI. The analysis results of the two products being integrated with the aspects of product, service, and user, four design improvement directions such as eco-efficient, smart, modularized, and user-support were recommended for an eco-friendly electric heater. These proposed concepts would be useful to develop an eco-friendly electric heater design with a high level of market competitiveness.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.429-438
• /
• 2009

In order to find out the customer requirements and to develop new products more effectively, the Kano model and QFD(Quality Function Deployment), AHP(Analytic Hierarchy Process) developed and applied. But, Many companies difficult to select the CTQ(Critical to Quality) of new product. Especially the life cycle of cell phone is very short. In this thesis, the Kano model and AHP(Analytic Hierarchy Process) for finding the CTQ(Critical to Quality) for customer satisfaction are suggested. It is explained and discussed with the example of cell phone.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.359-369
• /
• 2010

In order to find out the customer requirements and to develop new products more effectively, the Kano model and QFD(Quality Function Deployment), AHP(Analytic Hierarchy Process) developed and applied. But, Many companies difficult to select the CTQ(Critical to Quality) of new product. Especially the life cycle of Digital Camera is very short. In this thesis, the Kano model and AHP(Analytic Hierarchy Process) for finding the CTQ(Critical to Quality) for customer satisfaction are suggested. It is explained and discussed with the example of Digital Camera.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.94-105
• /
• 2010

Todays, there is fast transition about the new manufacturing IT methodologies from the conceptual phase into the practical application phase for the strengthening of enterprise competitiveness in manufacturing industry. One of those new methodologies is PLM (Product Life-cycle Management). PLM methodology consists of 3D CAD for the product design, PDM (Product Data Management) for the data management based on the collaboration platform and lastly DM (Digital Manufacturing). DM has evoluted from the stand-alone computer simulation of early 1980s, and now it covers the overall production development and production. Unfortunately, there exist serious critical problems about the actual application of DM for the real work. This is owing to the transition of the point of view from stand-alone type application (such as flow simulation or robot simulation) to that of business process about product development and production management. In this paper, we propose an application framework for the successful project with the digital manufacturing methodology with the concept of Information Strategy Planning, which enables the systematic diagnosis and the quantitative evaluation. Also, we introduce the actual practice of the proposing framework with the ISP project for 'Analysis & Simulation Technique of manufacturing process project' that is being conducted by Chungnam Techno Park.

• Journal of Applied Reliability
• /
• v.9 no.4
• /
• pp.343-349
• /
• 2009

One of the recent hot issues in the manufacturing business is how to incorporate environmental attributes into product and process design. Design for environment considers the potential environmental impact of a product throughout its life-cycle. In the case of something breaks, it can become waste immediately, hence reliability and durability is the essential part of product design. This paper presents reliability technology for sustainable product design to improve the product longevity that extends performance life, serviceability and durability. The presented method will help to develop a sound design and avoid weak links to minimize the waste.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.269-269
• /
• 2001

Maintainability refers to the ease with which maintenance work can be done. It involves the process of ensuring that products can be easily and safely maintained and that the maintenance support requirement is minimized. When a product has a reasonably long life, the cost of operation and support during that life can greatly exceed the initial capital cost. The value to the customer of optimizing maintainability should be evident. Some effort and expense applied to achieving a product which can be easily and cheaply maintained will make very significant savings in the life cycle costs. In this paper, the International Standard IEC 60300-3-10, which is the application guide for maintainability, is considered. This standard can be used to implement a maintainability program covering the initiation, development and in-service phases of a product. It provides guidance on how the maintenance aspects of the tasks should be considered in order to achieve optimum maintainability. The elements of a maintainability program, which are maintenance policy and concept, maintainability studies, project management, design for maintainability, analysis and prediction methods, maintenance verification and validation, analysis of life cycle cost, maintenance support planning, and collection and analysis of maintenance data, are fully discussed in this paper.