• 한국축산식품학회지
• /
• 제42권3호
• /
• pp.441-454
• /
• 2022

This study aimed to determine the effect of enzyme, guar gum, and pressure processing on the digestibility and physicochemical properties of age-friendly liver sausages. Liver sausages were manufactured by adding proteolytic enzyme (Bromelain) and guar gum, and pressure-cooking (0.06 MPa), with the following treatments: control, without proteolytic enzyme; T1, proteolytic enzyme; T2, proteolytic enzyme and guar gum; T3, pressure-cooking; T4, proteolytic enzyme and pressure-cooking; T5, proteolytic enzyme, guar gum, and pressure-cooking. The pH was high in the enzyme- and pressure-processed groups. The pressure-processed groups had lower apparent viscosity than other cooking groups, and it decreased during enzyme treatment. Hardness was lower in the enzyme- and pressure-processed groups than in the control, and the T4 was the lowest. Digestibility was the highest in T4 at 82.58%, and there was no significant difference with that in T5. The general cooking group with enzyme and guar gum also showed higher digestibility than the control (77.50%). As a result of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the enzyme- and pressure-treated groups (T4, T5) were degraded more into low-molecular-weight peptides (≤37 kDa) than the control and other treatments. Viscoelasticity showed similar trends for viscous and elastic moduli. Similarly, combined pressure processing and enzymatic treatment decreased viscoelasticity, while guar gum increased elasticity but decreased viscosity. Therefore, the tenderized physical properties and improved digestibility by enzyme and pressurization treatment could be used to produce age-friendly spreadable liver sausages.

• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.205-213
• /
• 2019

A calculation model of reservoir pressure field distribution around multiple production wells in a heavy oil reservoir is established, which can overcome the unreasonable uniform-pressure value calculated by the traditional mathematical model in the multiwell mining areas. A calculating program is developed based on the deduced equations by using Visual Basic computer language. Based on the proposed mathematical model, the effects of drainage rate and formation permeability on the distribution of reservoir pressure are studied. Results show that the reservoir pressure drops most at the wellbore. The farther the distance away from the borehole, the sparser the isobaric lines distribute. Increasing drainage rate results in decreasing reservoir pressure and bottom-hole pressure, especially the latter. The permeability has a significant effect on bottom hole pressure. The study provides a reference basis for studying the dynamic pressure field distribution before thermal recovery technology in heavy oilfield and optimizing construction parameters.

• 한국축산식품학회지
• /
• 제41권2호
• /
• pp.185-195
• /
• 2021

The objective of this study was to determine the effects of high pressure to investigate the technical functional properties of the protein solution extracted from an edible insect, Protaetia brevitarsis seulensis. High pressure processing was performed at 0 (control), 100, 200, 300, 400, and 500 MPa at 35℃. The essential amino acid index of the control was lower (p<0.05) than that of the P. brevitarsis seulensis extract treated with 100 MPa. The SDS-PAGE patterns tended to become faint at approximately 75 kDa and thicker at approximately 37 KDa after high pressure treatment. The protein solubility and pH of the protein tended to increase as the hydrostatic pressure levels increased. The instrument color values (redness and yellowness) of the P. brevitarsis seulensis protein treated with high pressure were lower (p<0.05) than those of the control. The forming capacity of the protein solution with P. brevitarsis seulensis treated with high pressure was higher (p<0.05) than that of the control. In conclusion, we confirmed that the technical functional properties of edible insect proteins extracted under high pressure of 200 MPa are improved. Our results indicate that high pressure can improve the technical functional properties of proteins from edible insects.

• 한국식품영양학회지
• /
• 제24권4호
• /
• pp.746-752
• /
• 2011

반고형 형태의 이유식 제조에 가장 적합한 물성을 부여하는 점증제를 선정하기 위해 쌀가루, 변성전분 1 및 변성전분 2를 4%를 첨가하거나 0.3% 펙틴을 첨가한 이유식을 550 MPa 압력에서 3분 동안 초고압 처리하여 점도를 측정하고 관능평가를 실시한 결과, 쌀가루를 첨가한 바나나와 사과 이유식 모두 색, 흐름성 및 질감에서 가장 선호도가 높았을 뿐 아니라 시판 이유식과 가장 유사한 점도를 보여 반고형 상태의 이유식 제조에 쌀가루가 점증제로 적합하였다. 점증제로 선정된 쌀가루를 4%, 6% 및 8% 첨가하여 제조한 이유식을 450 MPa과 550 MPa의 압력 조건에서 1, 3, 5분 처리한 결과, 쌀가루 첨가 비율이 높아질수록 점도와 색도의 밝기는 증가하였고, pH와 당도에서 유의적인 차이는 없었다. 또한 초고압 처리 조건에서 압력의 변화와 처리시간의 증가에 따른 유의적인 차이를 보이지 않는다. 즉 초고압 처리가 이유식의 물성에 영향을 크게 미치지 않으므로 경제성 및 점증제의 호화 정도를 고려하여 이유식 제조를 위한 초고압 처리 조건은 550 MPa, 3 min이 가장 적당한 처리 조건으로 판단되었다.

• Food Science and Biotechnology
• /
• 제15권1호
• /
• pp.13-18
• /
• 2006

Mandarin juice was processed using a continuous high pressure $CO_2$ system. Response surface methodology was used to investigate the effects of the processing parameters such as temperature, pressure, residence time, and %(w/w) ratio of $CO_2$ to juice on total aerobic count (TAC), pectinesterase (PE) activity, cloud level, $^{\circ}Brix$, pH, and titratable acidity (TA) of the juices. Maximum log reduction (3.47) of TAC was observed at $35^{\circ}C$, 41.1 MPa, 9 min residence time, and 7% $CO_2$. PE was inactivated by 7-51%. The cloud was not only retained but was also enhanced by 38%. Lightness and yellowness increased, and redness decreased. The processing temperature and % $CO_2$/juice ratio significantly affected high pressure $CO_2$ processing of the juice in terms of pasteurization, PE inactivation, cloud increase, and color change. The $^{\circ}Brix$, pH, and TA before and after treatment remained unchanged.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 2003

Drop size is one of the most important parameters which are control the performance of the engine using liquid fuel/oxidizer and drop formation is mainly controlled by aerodynamic force caused by ambient gas. Because of this, empirical data and correlation acquired under standard ambient condition are not valid. So experiments under high ambient pressure condition to measure the drop size using image processing method And find the empirical correlation between SMD and chamber pressure(density), injection velocity.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.360-363
• /
• 2007

Microstructure and microhardness of metallic powders of pure copper were studied after high pressure torsion(HPT) processing with 10 turns of die rotation and high pressure of 6 GPa. The grain size of copper decreases drastically after HPT and reaches nanometer size ranges. During HPT, the hardness of consolidates of copper powders increases with increasing the temperature of HPT processing. Examinations of the fracture surfaces indicated evidence of ductile fracture. The results proved that HPT of copper powders has a beneficial effect for homogeneous deformation with reducing grain size.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.54-57
• /
• 2004

Almost all injection molds have multi-cavity runner for mass production, which are designed with geometrically balanced runner system in order to minimize filling imbalance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalances have sometimes been observed. These filling imbalances have historically been considered as result of uneven mold temperature and mold deflection, but it actually results from non-symmetrically shear, pressure, temperature distribution within melt material as it flows through the runner system. Filling imbalance could be decreased by modifying processing conditions that are related to shear, pressure, temperature such as injection rate, mold temperature, injection pressure, melt temperature. In this study, a series of experiment was conducted using Taguchi method to determine which processing condition influence as the primary cause of filling imbalance in geometrically balanced runner system. As a result of experiments, this paper could present an optimal processing condition to minimize variable that brings about filling imbalance geometrically balanced runner system

• Food Science and Biotechnology
• /
• 제15권4호
• /
• pp.523-528
• /
• 2006

The digestibility of heat- or high-pres sure-treated beef extracts was evaluated with an in vitro simulated gastric digestion model and each sample also underwent immune assay to detect its antigenicity with the sera of beef allergic patients. Heat treatment of the beef extracts considerably decreased their digestibility, whereas high-pressure treatment at 200 MPa improved their digestibility compared with the control, but the difference was not significant. The digestibility of the high pressure-treated beef extract was generally higher than that of the heat-treated samples. Depending on the degree of digestion, the degree of antigenicity of the main beef allergens decreased. On the basis of these results, we hypothesized that the allergenicity of beef could be eliminated if the allergenic proteins are sufficiently digested in the digestive organ, leading to the suggestion that the digestibility of allergenic proteins must be improved in food processing. In conclusion, high-pressure processing is a more acceptable food processing technique for beef considering its digestibility.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2006년도 정기총회 및 제37차 춘계 국제학술발표대회
• /
• pp.325-328
• /
• 2006

In low nitrite level, treatment of combined with pressure and thermal processing improved cured meat colour comparing with that of only thermal processing. However, visual colour of only pressurised treatment could not be improved at low nitrite level. Pressure treatment could develop cured meat colour when high nitrite level was added. Moreover, pressurisation combined with thermal processing decreased nitrite residuals compared to thermal processing. Therefore the results indicated that pressurisation combined with thermal processing had potential benefits in appearance of cured meat products, promising improved food safety.